My bonus unit wasn't advancing and I think the bonus release lever was sticky causing the problem.

I broke the pivot screw on the release lever when removing it. Not sure if it was already cracked and was binding the lever, but it's broken now.

Anyone have an assembly diagram with part # ? I'll be calling PBR, but always like having the part number first. Or if you know of a source for a generic replacement screw, please let me know.

Th2019-10-03 15.59.37 (resized).jpge lever is the horizontal piece, attached to the small spring in the pic below.

2019-10-03 15.59.50 (resized).jpg

Thanks!

MikeO,

Thanks for the lead, but that part # you mentioned is way too long for what this is.

I did find these two on Marco, one of them will be the correct length.

SHOULDER SCREW #530-5248-00
SHOULDER BOLT 8-32 X 1/4 INCH #530-5064-00

I hate that a machine is down for a $2 part.

Those aren't the same units, but that is the corresponding bolt.

The difference is that the release arm is solid because it releases to 0, not in an incremental way like a credit reel.

Thanks again.