The Big Lebowski
Dutch Pinball, 2016You're currently viewing posts by Pinsider knockerlover.
Click here to go back to viewing the entire thread.
Bowling alley seems to work fine, but getting the error “bowling opto stuck closed” in test report.
The main opto beam in the front of the pins doesn’t trigger in switch test. I’ve reseated all the connectors, any other ideas on what to test? Or is this maybe a non issue given the bowling alley works?
Quoted from Rensh:The only function of the opto is that tbl knows to pull the pins which are calculated to drop. So from a software point of view everything still will work on the display.
Are the pins still being pulled up when ball is released?
Than, is the light pad not blocked eg are the transmitter and sensor still in long with the holes? Reseated the connectors on the 2 optoboards I think. Crimping on cabling looks OK?
Found the opto connector plugged in one pin off. Error went away, thank you.
You're currently viewing posts by Pinsider knockerlover.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/a-lotta-ins-a-lotta-outs-tbl-maintenance-thread?tu=knockerlover and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Athens, TX