Has anyone replaced an LED on the main pcb? The “Y” for Donny is out on my game. Plus I have the occasional bowling stutter and garage door stutter.

Anyone have a good suggestion. DP has not responded to any emails.

Thank you for the advice guys. I will give both of those approaches a shot when I can. As you can imagine I was pretty bummed about the led, the bowling lane I knew other people ran into that issue before. I’ll report back once I can look a little more closely per your advice.

I can grab some photos of the underside of the playfield. I'll also update this thread with the part numbers for the transistor and leds used on the boards when I have a chance.

That is really sad. What a bummer.

On another note, I was able to get my main board back up and running. Replaced the transistors and led for the insert light. What a horrible design and execution on the connections/board system on this game. I'll update part numbers and photos of the repair.

Looking for a little help. I have EA108 and the game worked when I got it a few months back. Went to turn it on today and I get a quick flash of light on the pf and then nothing. Small boards by the coin door do have led lit up and the power supply fan does seem to run. Eventually get a no signal on the display.

Anything I should check for?