Hi there...is there an easy way to realign the garage door on TBL? The door does not close correctly (I think) and it bangs against the garage for several seconds before stopping.
Garage Door (resized).pngYou're currently viewing posts by Pinsider adamjx.
Click here to go back to viewing the entire thread.
Quoted from cpr9999:Yes, you need to take the roof off and then the metal walls off.
From here you adjust the 1 or 2 screws that hold the car to the servo motor shaft.
I did it about a month or so ago. See post below.
https://pinside.com/pinball/forum/topic/a-lotta-ins-a-lotta-outs-tbl-maintenance-thread/page/27#post-7034779
By the way, I would be more concerned that if it gets to low, it will scrape your mini-playfield clear coat....so adjusting it is a must.
Quoted from Rensh:This method is for when your door is tilted under an angle. Here more likely is that the cardoor closed switch needs some adjustment. Looks like it triggers to early leaving the door slightly open.
See the proper page in the service faq but if you remove the roof you can already see the switch. Should be an easy adjustment.
Thank you very much for the responses, I will give it a try.
You're currently viewing posts by Pinsider adamjx.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/a-lotta-ins-a-lotta-outs-tbl-maintenance-thread?tu=adamjx and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.