Guys
Setting up a TBL owners forum. For EAs without games.
You are welcome to join and bring any ideas you may have to the table

You found it 4 months ago

Hi All

Turned on TBL today,
Started a game and pressed the right flipper.

The upper flipper activated and stayed up,
First I thought it was a spring had come off (happened on lower left before)

Lifted playfield and checked- spring still on, thought coil is locked on.. but it’s not, giving the mech a nudge and it releases.

Checked sleeve- had a ridge in it, replaced it, but still doing it. The plunger moves freely in when doing it with finger and doesn’t stick.

Press the right button and again it sticks!?

Anyone had this happen to them...yet

Replaced sleeve, replaced spring... with a stronger one I think so now it won’t make the bowling ramp..Didn’t check the stop

Update on this- it wasn’t any magnified parts. I replaced the black plastic bushing in the upper playfield and over tightened the flipper-

Something very simple to do.

How much is the new stepper motor kit for the upper playfield @rens?

Thanks

I literally updated TBL to 0.58 yesterday,

Rensh is the code you updated bug fixes?

Also my display is a little flickery- with lines visually going up the screen until it warms up..