My right eject hole isn't working. Coil checks out fine. doesn't fire during solenoid test #9) either.
(switch is working) seems fuse F104 covers Solenoids #9-16 so it isn't the fuse.
I've been raising and lowering the PF a lot lately adding some mods (to gen. illumination)
I've unhooked the ones I did hook up but no difference.
I'm at a loss at what to check next Manual says J133-3 connection and drive resistor Q44 (could the resistor be "blown" and
how does one check it?)
any help is appreciated
(I'm tech challenged too..)
PS> added pic - could the diode be bad? switch works (counts points - but ball sits there)