New! Dark mode!

Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!

(Topic ID: 266123)

78 Bally Kiss Solendoid Test #3 Fails - Drop Targets


By pjschurman31

6 months ago



Topic Stats

  • 10 posts
  • 2 Pinsiders participating
  • Latest reply 6 months ago by pjschurman31
  • No one calls this topic a favorite

You

Linked Games

#1 6 months ago

So any help would be greatly appreciated. I replace the solenoid (NO-26-1900) on the drop targets and saw the 1N4004 Diode on the solenoid was shot so I replaced that too. All of my solenoids are firing except the drop targets. I am ready to replace the entire board but would appreciate any advice.

#3 6 months ago

Thanks, quick question. The drop targets used to work, but I did notice there are not two large gauge yellow wires going to one lug, it appears it has always been this way (only one) do you think this could have caused the driver to go bad on the solenoid board? As I do not want to get a new board and have this happen again.

#4 6 months ago

probably the blown diode/bad coil blew the driver, easy fix

#5 6 months ago

So do you still recommend I replace the board? or what is your easy fix... or is the easy fix replacing the board

Also, do you recommend a reliable resource and/or replacement board for the AS-2518-22.

#6 6 months ago
Quoted from pjschurman31:

So do you still recommend I replace the board? or what is your easy fix... or is the easy fix replacing the board
Also, do you recommend a reliable resource and/or replacement board for the AS-2518-22.

Do you know how to solder?

#7 6 months ago

OR...highly recommend

https://nvram.weebly.com/new-pcbs.html

Piece of mind with a new board

#8 6 months ago

I do... What do I need to replace... but I still may order a new board... but always love a challenge! I open to the fix... let me know what I need to do.

#10 6 months ago

I'll give it a try... thanks for your help and always appreciate the quick responses! ~Peter

Promoted items from the Pinside Marketplace
From: $ 10.00
Electronics
Third Coast Pinball
From: $ 45.00
Displays
PinballSolutions.eu
$ 8.00
Electronics
Third Coast Pinball
From: $ 25.00
Boards
nvram.weebly.com
From: $ 5.00
Cabinet - Other
Rock Custom Pinball
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 9.00
Electronics
Yorktown Arcade Supply

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside