Working on a 1976 Williams Space Mission and I think I'm missing the latch plate for the coin door lock (part# 1A-3574). A previous owner installed a kludgy homemade locking mech and now that I've undone it there's a ton of slop when the door is closed.

Would someone be able to snap a pic of the inside of their cab to confirm?

Thank you!

IMG_7304_(resized).JPG
Screen_Shot_2016-01-31_at_8.33.08_AM_(resized).png

Thanks for the advice.

So in the diagram 1A-3574 is the cam and 1B-6249 is the plate?

Thanks all! Much appreciated.

Found the latch plate in the manual:

Screen_Shot_2016-01-31_at_4.39.48_PM_(resized).png

I'm probably just going to bend the generic cam for the time being. Thanks again.

Cool, thanks for the offer. I'm going to see where I get with the offset cam first. Will let you know.

I mean I'm going to see where I get bending an offset into the standard lock cam.

Bending the stock cam in a vise worked out great. Thanks again for the advice.