currently repining a game, and decided to go ahead and repin the edge connectors as well. problem is I've never seen this specific type of pin before.
I have a boat load of the 4366 series since I use it for other stuff, It looks similar except for the big U looking thing right before the main edge contact.
Went through all the edge connectors on mouser and couldn't find anything similar, is there something I can sub it with?
edge1 (resized).jpgedge2 (resized).jpgthe only ones that look somewhat similar are from TE, doesn't seem like molex brand is really making many edge connectors anymore.
Quoted from chad:Great Plains Electronics may have them.
yeah, I checked... didn't see anything similar there either.
I might just ask them.
A lot of edge connector crimp terminals are NLM
Lucky for us, the sys 7-9 display driver came in 2 version, pinned and edge connector.
Both boards do the exact same thing, and you can cut the I/O connectors off from the harness and switch one to the other in about 10 minutes.
0efd2625839703fd323700d8aee2a2470b72fc37 (resized).jpg521d4e3b0bb1d8d26609ef8258433b6dd9577b50 (resized).jpgWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/7-segment-display-driver-board-pin-identification-system-9 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sana'a