Special Force
Bally, 1986You're currently viewing posts by Pinsider Flippermatt.
Click here to go back to viewing the entire thread.
Quoted from fusion301:Getting voltage to the flashers, they just wont flash which makes me think transistor but grounding out transistor does nothing either. Its weird they would all be out but all have voltage going to them
Hi...
Did you find the solution to your problem ? I have a similiar one with my Escape from the Lost World..
reg
Matt in Sweden
Quoted from Richard_BoK:There are 2 flashers which are driven by 1 transistor. One switches to the positive side of the sinewave, the other to the negative side.
In the schematics these are indicated as phase C and D. (A&B are for feature lights)
There are diodes on the flashers, and a single wire to the transistor.
How many flashers do not work?
A single flasher indicates the diode, flasher or socket.
A group of 2 indicates a transistor or the wire/connector.
A group of flashers on a single phase indicates a blown fuse or daisy chained wire being loose.
What exactly is the problem on your machine?
All flashers are out...
I am totally new to Bally 6803 and will take any advice that is thrown to me what to do and look for... Thanks for the above input.. I will check and try to get a generall picture of what is not working. . Yesterday I focused on wasting the old battery, charging transistor and installing a lithium holder and diode.
reg
Matt in Sweden
You're currently viewing posts by Pinsider Flippermatt.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/6803-bally-flasher-issues?tu=Flippermatt and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
