OP
Quoted from Troostr:
I’m pretty green to the Mame world. I’ve got my 60 in one set up but am having a hard time with the settings. When I turn the board dip sw to test, I can’t get off the screen test svc and test buttons do nothing. But if I turn it on holding the test or svc sw I can get into the settings and change what I want. But how do you save your settings? The manual is pretty scarce of instruction. What am I missing that my settings won’t save?
Thanks in advance!

I think its dipswitch 4 you have to turn off or on to get into settings. I flip dipswitch 4 and the power machine up. Once I set everything up in settings I always go back to the first screen that says hit S3 or S4 to do a system check. When I do that it seems to save the settings.

#5 4 years ago

JRW

J_Striker

RP1 Amusements

Marshville, NC

10y 87,550 1,923 39 25 1

Quoted from EJS:
Yes this should be it.
There should be a designated button to boot into test/settings which needs to be closed on power up. That might be the same you use to scroll through the menu. Another switch (P1 or S1 etc) to save what you just changed. To be on the safe side I always save every page I edited before moving to the next page.
I don't recall adjusting any dip switches while doing this. I recall one of the 4 DIP switches enables/ disables the high score memory.
Speaking of memory I haven't adjusted my game in over 6 years so take my post with a grain of salt.

Dip switch 3 does high score saving

3 weeks later

#11 4 years ago

JRW

J_Striker

RP1 Amusements

Marshville, NC

10y 87,550 1,923 39 25 1

Quoted from trilogybeer:
Do you have to go into settings and change something to save high scores ? I have Dip switch 3 on and mine does not save high scores . I just got this 60 in 1 about 2 months ago , I would like it to save high scores and thought it was set up to do so .

https://www.mikesarcade.com/estore/datasheets/60IN1PCB.pdf

Dip switch 3 should be on and that should save your high scores

You're currently viewing posts by Pinsider j_striker.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/60-in-1-what-am-i-doing-wrong-?tu=j_striker and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.