Besides Bad Cats, what other pinball machines have 5 target drop target assemblies?
(Topic ID: 56682)
Linked Games
Judge Dredd
Bally, 1993-
Skateball
Bally, 1980
Topic Gallery
Columbus, IN
In Sys11, you also had Swords of Fury, and a very small handful of Rollergames.
Judge Dredd had a bank of 5, but it was a different setup than the bank used in S11s.
Technically, the SoF and Bad Cats used a slightly different bank of drops - at least they had different P/Ns - but I'm not sure what actual differences they had. Perhaps it had to do with the opto boards.
Thanks John...
I'm still working on remaking the drop target stop bars. The wear resistant nylon is due to arrive today.
Are you still interested in a couple?
I'd like to find out what other drop target these stop bars will work on...The stop bar is mounted using 4 rivets, spaced 1.833 apart. The rivets are also located in shallow counter-bores, with rivet head sitting below the tapered area of the stop bar.
Quoted from o-din:Joker Poker has 5 drop target banks, with a total of 15 targets.
I'm trying to find out the names of machines that have 5 drop targets all in a row, side by side. More than likely, my stop bars will only work on system 11 machines, but I'm wondering if the stop bars will work on WPC games as well....that is, if there are any WPC games that have the 5 target drop target assemblies.
I'll definitely take 2 of them.
You might also consider making a call to BAA, Marco, PBR etc.
They might buy some and stock them.
Quoted from johnwartjr:You might also consider making a call to BAA, Marco, PBR etc.
They might buy some and stock them.
Considering I'm having to actually machine them, I doubt any of the parts providers would buy in at my $10 price.
I can't compete w/ the injection mold price, that's for sure.
Apparently, no-one has the mold.
Elvis and ACDC Prem/LE have a 5 bank drop target. But your question was kind of vague for the purpose.
Quoted from xbloodgreenx:Elvis and ACDC Prem/LE have a 5 bank drop target. But your question was kind of vague for the purpose.
I guess I should change the title on this post.
I'm only interested in Williams drop target assemblies.
This list is incomplete as not every game with a 5-bank is tagged with one:
http://ipdb.org/search.pl?ft=5-bank+drop+targets&searchtype=advanced
viperrwk
Quoted from indypinhead:I guess I should change the title on this post.
I'm only interested in Williams drop target assemblies.
http://ipdb.org/search.pl?mfgid=413&ft=5-bank+drop+targets&searchtype=advanced
viperrwk
I don't know if this will fit a $6,000,000 man machine.
You'd have to look closely at yours. Keep in mind, the hole spacing on these are 1.833.
Baby PacMan, though a little different with the captive ball moving behind and dropping 1 or 5 with the corresponding target resetting.
I have one of the Rollergames 5 banks taken apart right now. I will check tomorrow to be sure, but I *think* the RG ones use *5* fasteners.
They aren't riveted on the Rollergames, they have small machine screws holding them down.
So, the RG part is indeed different.
Here's a photo:
It uses a series of small screws to hold it in place.
Is this something you have interest in making?
I said I'll take 2, so I'll take 2 - let me know where to send the $$ and you can give them away or something. Don't want to leave you stuck with them.
John,
You're not stuck with having to buy any.
I made a few while I had the job set up.
I mainly needed one for MY machine. I just figured since I was in need of one, there were probably other who might need one.
Just trying to help out the community.
Quoted from Finrod:Laser Cue has a bank of 5 drop targets with an unusual feature: not only can all the drop targets be raised independently (like Swords of Fury), but the machine can also lower all of them at once.
Barracora as well.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
