This is a custom built 4k VPX Pin I built from a virtuapin Kit. I have over $6500 in parts and over 80 hours of build time in it. I wouldn't recommend a machine like this to someone not familiar with VPX. It's fairly nuanced and there's a lot of detail in getting tables to work and look their best. If your interested I'd be happy to teach everything I know about it. I'm selling to make room for another real machine/ Planning on building a VR/Stubby setup for VPX. Here's the specs

Virtuapin WPC widebody / ultrawide backbox flatpack kits with WPC legs/rails and lock down assembly
8th gen I5,  3060ti-8gb, 16gb RAM PC with Windows 10 and Pinup Popper front end
43" 4k 120hz Asus ROG Playfield.
32" 1080P HP backbox Monitor
15.4"  Full DMD With Virtuapin speaker panel and custom acrylic overlay.
Arnoz ringmaster with KL25z running Pinscape firmware for I/O / built in accelerometer for analog nudge
Real Tilt bob
5.4" stereo speaker system with 6" Cab Sub Woofer
7.1 Surround sound feedback for lifelike ball /table mech sounds (3x2.1 amps with dedicated 24 volt Meanwell PSU for SSF & primary sound)
Lab Arcade Thunder Clap Coils for flipper mech feedback
Replay knocker 
1,164 total  addressable RGB LEDs - (138x2 playfield addressable side strips, 768 Middle Addressable Matrix, 2 x 60 under cab addressable strips) -
Addressable LEDs powered by a dedicated Meanwell 5v PSU
Addressables controlled by an Arnoz Teencab/Teensy 4.0 with fused Volt Boards
All button Lamps are 12v LED with dedicated Meanwell PSU
Cointaker LED Flipper and magna save buttons with real leaf switches
Purple "Wizard ball" plunger
Custom "Wizard" art by Stuzza
All the connections are terminated with crimp spades/ferrules or Molex style connectors

build log album can be found here: https://imgur.com/gallery/cjJCzKT
Video/LED action: https://i.imgur.com/i0JoS1f.mp4 | https://i.imgur.com/utGl8DU.mp4


The PC is removable via a wooden shelf / attached with Plastic stand offs

The monitor Raises up using traditional WPC pivot nuts for easy maintenance ( I've opened it twice since building it. Once to add under cab lights and once to add a USB volume knob)

Easy loadout on ground level. I would prefer local pickup so we can go over all the details but I would consider a meet up for the right circumstances.

I would consider trades for working DMD/modern games / + cash for the right game