Question for the experts... so did I get a bad roll from Amazon?
Both surfaces cleaned (made sure no oils on the new ramps surface from tooling).
Seems like I'm getting an orange-peel type of bubbling no matter how much try and smooth.

Close up pic of what I'm seeing.
And then 2nd pic is full ramp... issue not really too bad. (And new ramp is not exactly blemish free to start with. (even after a flame polish))

This is what I bought: https://www.amazon.com/467MP-Clear-Adhesive-Transfer-length/dp/B007Y7CV86/ref=sr_1_2

IMG_20200731_131837 (resized).jpg

IMG_20200731_131901 (resized).jpg

Bump...

Re-bump...

Thanks for the feedback guys....
I'll retry rubbing the bubbles out again.