Hi All
Have gotten quite a few e-mails on this one.
Get it now. Brock did great job again..not sure when the next batch will be in..but we have about 10 sets available right now.

https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball
Thanks!
-JR

Screen Shot 2018-01-15 at 10.38.34 PM (resized).png

That sounds way cool ! Very different and unique for sure!
The WOZ walls kit he makes is off the hook also...

Got 4 snake kits left ... get ‘em while they are hot!

OK ... two sets left....

Ok.. folks..we are a go for another 15 sets...available now.. first come first serve...

https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball

Get 'em while they are hot!

-Joe
www.pingraffix.com
[email protected]

BUMP:
Got fives sets left...
who needs one?

https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball

Best!
-Joe

We just finished the mirrors for Dialed Here..check them out...

Dialed_In (resized).jpg

Dialed_In2 (resized).jpg

Hi Colonel
Gina has been offline due to some personal issues and therefore I never saw the email. I will get it out to you today.
Best regards
Joe

Hi Colonel
PM sent...

Thanks man! We are in the makings of another batch . about three weeks out.

HI all...we had a set back here and just getting back on our feet. We will have a new 3D Snake mod available soon and it will be an improveed verison that I think everyone is going to love. Stay tuned.

Hi all

It's definitely taking longer than we anticipated but I promise it will be awesome.
In the meantime. New Product

Glow in the Dark Snake Fangs

$20.00 comes with 1 of our Famous Snake Tounge decals
Screen Shot 2019-03-02 at 2.26.06 AM (resized).png

https://www.pingraffix.com/product-page/metallica-snake-fang-kit

Production has begun.
3 weeks. Will post a pre-order link shortly.
Thanks for your patience. It's a hand made item so it takes time.,

So ..we are now taking Pre-orders on the next run.
20 Spots available. Expected Delivery 1st week of September.

reserve yours now..

https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball

1st come 1st serve ..

thanks !
-JR

You're welcome.These things are hand made and painted so it takes a while to make them. I appreaciate you guys having faith and following us. I never had any complaints about clearance on MET at all. STERN games have plenty of tolerance usually. If you have 1/8 inch on the side between the cabinet and the playfield you should be good to go.

A good way to test is get 5 pieces of plain paper and stack them. Take the stack and slide between the cabinet and the playfield on both sides of you game. That is about the thickness needed.

Just made some more. You can get them now: https://www.pingraffix.com/product-page/metallica-snake-fang-and-mouth-decals-kit

We have 13 sets left on the 3D snakes as of today.

https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball

Three spots left..

They have begun shipping as of today.

https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball

Get 'em while they last..

OK folks...we are finally going to make another small run of these. PRE ORDER your set here:

https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball

This is a pre order! Meaning: We don't have them yet but we are making them and first come first serve.
Turnaround time 1 to 2 months.

I get so many emails about these..here is your chance again.
Thanks
Joe

BUMP for the night crowd...

You're welcome!

We are just about sold out again.. a few left... Thanks to all that ordered!

Hi All
We apologize for taking so long but these are all handmade items and we received so many orders for these we are practically buried in them. We definitely oversold!
We do greatly appreciate everyones patronage and thank you for choosing PinGraffix.
The last remaining sets are now done and will commence shipping next week. 3/4 of all the orders have been shipped.
You will very happy once you get your set. Unfortunately, this is the absolute last time we are making them for sure.
It's honestly too much strain on all involved and I don't like to make people wait.
This is why we stopped making them in first place..but we had people practically begging us to remake them..we answered the call and ..this is what happens....
*sigh*
Guess it's just the business we are in.
-Joe

I guess I should get these going again. Keep you guys posted.

Hey guys

We are beginning the next run of 3D snake mods.
I have put them back on our website here:
https://www.pingraffix.com/product-page/metallica-3d-snake-mod-for-stern-pinball

Only making 25 this run. First come first serve.
This is a PRE-ORDER.
We anticipate shipping them by the end of May.

Thanks and good luck..they sell out fast!

Joe

Update:

12 left.....

I believe someone actually made a mod for this mod. Yes..you heard correctly..It was a piece of mirror like seen on TOM that gave you reflection from the rear. I was trying to find it but unfortunately no luck. I guess I could cut a piece of Mirror vinyl for the back panel and add it to the kit.

8 spots left..

thanks

I just saw this one too... Kind of cool

https://pinside.com/pinball/shops/shop/1171-pinball-z/02184-elevated-rollover-lane-lights-metallica-pro

7 spots left....