Just got my DIYcore 500x500 kit in the other day, can't wait to print some monster stuff, but the only thing I can think of right now is pin2dmd frames.
You're currently viewing posts by Pinsider slicknick13.
Click here to go back to viewing the entire thread.
Just got my DIYcore 500x500 kit in the other day, can't wait to print some monster stuff, but the only thing I can think of right now is pin2dmd frames.
Quoted from dudah:Lots of good deals with Prime day today. Got a filament dryer, BLTouch, and a metric hardware kit
What deal did you get on a bltouch? I didn’t see any cheap ones. Might grab one to play with instead of cobbling inductive sensors together.
Quoted from snakesnsparklers:I will have to give that jyers firmware a shot! I'm still using the Smith3D firmware since I got my v2 a few months ago and it works well, but it doesn't have the bed level map and I'm sure other features.
Same, I like that map. I use inductive sensors for leveling but I have to use the BLTouch for my new bed since it has magnets and will screw it all up. Plus it seems to me that the touch sensors are congealing as the winner of the z end stop wars.
Even though you do auto level, it’s still important to have your bed leveled and axes trammed, a nice map would help.
Quoted from epeabs:I have an Ender 3 Pro and my hot end was failing and leaking. I have purchased an E3D V6 hot end and will be installing it with a Klemco bracket. All the pictures I see show it mounted with 2 50 X 15 fans, one on each side. The V6 comes with a fan mounted on a shroud installed on the heat sink. I'm currently only printing with PLA. Is this adequate for PLA or should I be upgrading to the larger fans on each side?
The fan that comes with the hot end is only to cool the heatsink to prevent heat creep past the heatbreak. You'll still need a part cooling fan, especially with PLA. Bridges and such will be lousy without one.
You're currently viewing posts by Pinsider slicknick13.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/3d-printing-sharing-thread-lets-better-the-hobby?tu=slicknick13 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.