High Speed
Williams, 1986You're currently viewing posts by Pinsider phillyfan64.
Click here to go back to viewing the entire thread.
My friend printed this from Thingiverse. Can this be modified to make it a little taller? That’s not the original switch or wire lugs so it’s really too tight the way it is. It pinches the wires.
1BE70BCC-8524-4102-862C-8E9389CB5C1F (resized).jpeg35016DEC-A6B5-4E64-B5F5-CC956EB8B449 (resized).jpeg747B66A1-67DE-429E-8E19-EE051BB6ED0B (resized).jpegThanks guys. My friend is just starting out with the 3D printing so he’s learning. It’s needs to be about an inch taller. The wire slot could be a little taller also.
Quoted from mbwalker:If you want me to stretch it in TinkerCAD, just PM me your e-mail. Like everyone mentioned, it's exceptionally easy, but I don't mind doing it real quick so you don't have to get up to speed.
It's literally just a couple in minutes of work.
But if you want to try it, just:
1 - create new 3D design
2 - import
3 - change height (bottom right of screen you can change between mm/inch)
4 - export stl[quoted image]
Thank you very much. I’ll send you a PM.
Quoted from bigguybbr:Just out of curiosity, have you considered soldering directly to the switch terminals rather than using those crimp connectors? That’ll give you all the clearance you need.
Yes I have considered it. I also just bought some flag shaped crimp lugs that I’m going to experiment with this weekend. That would also give me the extra room. I do have the correct crimper die for it. They have lower amp ratings (10 amps for 16-22 gauge) which is why I was hesitant but are probably ok. I would feel better if I could remove that 2nd purple wire from the switch and splice somewhere else instead of having 2 wires on 1 lug. The 2 purple wires were soldered to the old switch when I got the game last year. This is what it used to look like before the game was restored.
27AAC60E-E8BB-44CD-A183-25E6D7F016F9 (resized).jpegAA8349B3-E1D8-41EA-86D2-7A7763EC71AA (resized).pngYou're currently viewing posts by Pinsider phillyfan64.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/3d-printing-sharing-thread-lets-better-the-hobby?tu=phillyfan64 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Monroe Township, NJ
Dunakeszi