Wondering if anyone in here owns a JJP guns and roses and can make the linkage that goes on the spotlight servos for the up and down motion. These are prone to breaking and servos are easy to find on the internet, but the linkages however are not
You're currently viewing posts by Pinsider Mattyk.
Click here to go back to viewing the entire thread.
Wondering if anyone in here owns a JJP guns and roses and can make the linkage that goes on the spotlight servos for the up and down motion. These are prone to breaking and servos are easy to find on the internet, but the linkages however are not
Quoted from DavidCPA:I probably could if I had access to a GnR to take measurements. They are selling into private collections like crazy here is the SF Bay Area
The spot it breaks is circled. I tried to super glue it but it failed
87FDA2F1-5202-4DF7-BB0D-24F93D04AD66 (resized).jpeg90212665-7F57-4CFE-A671-84F25D3AA1BD (resized).jpegQuoted from mbwalker:Besides doing a 3D printed part...try some epoxy maybe?
Yes thanks. I’ll try some jb weld.
Quoted from mbwalker:JB Weld makes a version that is rather strong. I've used it, but I looked their web page but wasn't sure which one I used.
Looks like the slower cure time products have a higher strength than the quicker setting ones. You could maybe reinforce with some metal too.
Might have been this one:
[quoted image]
Perfect thanks. I will give that a try
Quoted from Nokoro:I wonder if you could also use one of those kits that has the fiberglass bonded with resin. Perhaps just a thin piece of fiberglass pressed on that area would reinforce it and make it rock solid for the future.
I’ve used them to fix and reinforce opaque ramps that are cracked, and the file cabinet bash toy on X Files. It works well. Not sure if it would add too much thickness to that spot on the servo linkage though.
I’ll look into that thanks. I appreciate the advice guys!
Quoted from Nokoro:This is the stuff I used:
amazon.com link »
I was actually just looking at that! I tried the jb weld. We’ll see. I am having a hard time keeping the pieces together while is sets
Quoted from Agima2000:I created that.
Part 2 is easier to print and works
https://www.thingiverse.com/thing:4854563
Wow thanks!! I have a buddy that has a printer
You're currently viewing posts by Pinsider Mattyk.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/3d-printing-sharing-thread-lets-better-the-hobby?tu=Mattyk and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.