Star Gazer
Stern Electronics, 1980You're currently viewing posts by Pinsider bpull.
Click here to go back to viewing the entire thread.
https://www.thingiverse.com/thing:2440510
I needed some light baffles for my StarGazer restore and created a file for the larger one. I plan on doing the smaller one too but here is a link above for the one I have created so far. feel free to down load and print it if you have the means.
Brian
light baffle 1 (resized).jpg
light baffle 2 (resized).jpg
light baffle 3 (resized).jpg
Quoted from RobCraig:I know this is old but ...Just wanted to thank you bpull for this model. I printed 4 of these single lamp baffles today for my Flash Gordon. Did you ever design 2-lamp width baffles? I may jump in and do it if you did not. But I like your design (rounded corners) and would be appreciative to use yours if you made them.
Thanks again for keeping this out in Thingiverse!
Rob, you are welcome and thanks! I have not done the 2-lamp width yet. I could easily add it but I would need the dimensions unless you have made the model already. If you haven't, I'd be happy to do it.
Brian
Quoted from RobCraig:I know this is old but ...Just wanted to thank you bpull for this model. I printed 4 of these single lamp baffles today for my Flash Gordon. Did you ever design 2-lamp width baffles? I may jump in and do it if you did not. But I like your design (rounded corners) and would be appreciative to use yours if you made them.
Thanks again for keeping this out in Thingiverse!
I have added the two light baffle.
You're currently viewing posts by Pinsider bpull.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/3d-printed-light-baffle-for-sg-file-link?tu=bpull and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Macomb, MI