(Topic ID: 193834)

3D printed Light baffle for classic sterns(stargazer,quicksilver) file link.


By bpull

2 years ago



Topic Stats

  • 5 posts
  • 2 Pinsiders participating
  • Latest reply 21 hours ago by bpull
  • Topic is favorited by 3 Pinsiders

You

Linked Games

Topic Gallery

There have been 4 images uploaded to this topic. (View topic image gallery).

20190916_215925 (resized).jpg
light baffle 3 (resized).jpg
light baffle 2 (resized).jpg
light baffle 1 (resized).jpg

#1 2 years ago

https://www.thingiverse.com/thing:2440510

I needed some light baffles for my StarGazer restore and created a file for the larger one. I plan on doing the smaller one too but here is a link above for the one I have created so far. feel free to down load and print it if you have the means.

Brian

light baffle 1 (resized).jpg
light baffle 2 (resized).jpg
light baffle 3 (resized).jpg

2 years later
#2 41 days ago

I know this is old but ...Just wanted to thank you bpull for this model. I printed 4 of these single lamp baffles today for my Flash Gordon. Did you ever design 2-lamp width baffles? I may jump in and do it if you did not. But I like your design (rounded corners) and would be appreciative to use yours if you made them.
Thanks again for keeping this out in Thingiverse!

#3 41 days ago
Quoted from RobCraig:

I know this is old but ...Just wanted to thank you bpull for this model. I printed 4 of these single lamp baffles today for my Flash Gordon. Did you ever design 2-lamp width baffles? I may jump in and do it if you did not. But I like your design (rounded corners) and would be appreciative to use yours if you made them.
Thanks again for keeping this out in Thingiverse!

Rob, you are welcome and thanks! I have not done the 2-lamp width yet. I could easily add it but I would need the dimensions unless you have made the model already. If you haven't, I'd be happy to do it.

Brian

1 month later
#4 6 days ago
Quoted from RobCraig:

I know this is old but ...Just wanted to thank you bpull for this model. I printed 4 of these single lamp baffles today for my Flash Gordon. Did you ever design 2-lamp width baffles? I may jump in and do it if you did not. But I like your design (rounded corners) and would be appreciative to use yours if you made them.
Thanks again for keeping this out in Thingiverse!

I have added the two light baffle.

https://www.thingiverse.com/thing:2440510

#5 21 hours ago

Two light baffle printed.

20190916_215925 (resized).jpg
Promoted items from the Pinside Marketplace
From: $ 45.00
Displays
PinballSolutions.eu
$ 7.65
Cabinet Parts
Third Coast Pinball
$ 119.95
Boards
Allteksystems
$ 10.00
$ 5.00
Playfield - Decals
Doc's Pinball Shop
From: $ 13.00
Electronics
Third Coast Pinball

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside