Quoted from mab487:Baywatch will be listed for 2500 OBO on the floor.
If anyone wants to make a deal before the show (game still has to stay on the floor till Sunday) I'll do 2300. PM your email or phone number and I can send more pics
I wasn’t planning on bringing any NIB games but have room for two new Sterns. I’ll bring if a deal is made before I leave tomorrow morning.
Quoted from PinballManiac40:You'll find that Baywatch in the ColorDMD booth.
That's right! Come play some Baywatch in color! (And buy it!)
Quoted from mab487:That's right! Come play some Baywatch in color! (And buy it!)
ColorDMD sold separately.
Flash tentatively sold.
Meteor tentatively sold.
BSD stuff tentatively sold.
Solar City still available.
Shaq Attaq stuff still available.
(See my previous post)
I also found the following and I'll bring to TPF if anyone wants them. Make me an offer:
Cherry 0001-4209-A DMD. From a Bally Dr Who. Fully working when removed.
Williams System 11 display 5760-12306-00. I have no idea if it works.
Player's condition Elektra. Legs are kind of rusty but the rest of the game is not. No water damage. Has the original clear red flippers on mini playfield, all the colored translucent targets are there and unbroken. A couple of cracked/broken plastics but as you can see no major breaks or missing ones. Red LEDs in the three red center targets (they don't flicker). Previous owner put the nicad on long wires and mounted in bottom of backbox. I left it that way. Looks like original 5V filter cap on solenoid driver board but I've had zero reliability issues with the MPU. Some ball swirls on the mini playfield, noticeable on woman's face. I cleaned/waxed everything but didn't try melamine foam or other methods. A small chip on backglass as shown. I masked off the windows and applied three coats of Triple Thick.
Every feature lamp, solenoid, and switch works, sound is excellent, plays fast and fun. Has free play with Oliver Kaegi's modification at U6. Easy to change it back to factory if desired. Someone had installed a big green videogame button to add credits. I removed the wiring, left the button. Left bottom of backbox frame was apparently damaged, someone painted it to match, have to look to notice it. New PBR 3-prong power cord.
Will be on the floor in Texas. $1500 OBO
Michael Beverly
20180225_175307_resized (resized).jpg
20180225_180202_resized (resized).jpg
20180225_180457_resized (resized).jpg
20180225_175622_resized (resized).jpg
20180225_180927_resized (resized).jpg
20180225_181427_resized (resized).jpg
20180225_180509_resized (resized).jpg
20180305_081028_resized (resized).jpg
20180305_081131_resized (resized).jpg
I have an Eight Ball Deluxe (1984 Black and White) available for $2,400 AS IS.
Displays are currently out. If I get the displays working, the price will be $2,600.
I can deliver to TPF.
8B8A3F6F-8AD7-415A-80E2-393D7934712B (resized).jpeg
E3435F1B-10C0-476C-A9C0-718D82244E64 (resized).jpeg
4AB08AA2-52A4-4096-9A34-29CECEEC0264 (resized).jpeg
30C94941-E6FC-4305-B9E0-9C91589DD1B5 (resized).jpeg
I have a few items I can bring if wanted.
A Metallica Creeping Death Lightning Kit $100.00
An Adams Family decal set from Phoenix Arcades $275.00
A set of Dracula decals $250.00
A used set of White Water ramps in good condition. One of the small ramps is new $125.00
A used White Water boulder set with a double of the rear boulder $50.00
A new Stern Kiss playfield $800.00
Anyone interested in buying a undocumented home use only Domestic Safe Cracker? I can bring it to the DFW area on Friday on my way to the festival if interested. $7300 OBO
I am interested in a nice nitro groundshaker backglass, original preferred but open to a remake also.
Anyone have one?
Quoted from Nevus:NoMonkey in Austin wants a Safecracker. You guys should get together.
I've already committed to buy another machine, but thank you for keeping me in mind! That said, I know Richie and he is a great guy. Buy with confidence!
Quoted from NoMonkey:I've already committed to buy another machine, but thank you for keeping me in mind! That said, I know Richie and he is a great guy. Buy with confidence!
Damn I never knew there were a few of these in the Austin area. Guess Ill know who to hit up when Im serious about buying one.
Looking for:
Bally playboy back box or something that will work
Bally playboy PF it overlay
System 11b mpu
Williams system 7 back box
Not a pinball, but I'm bringing an Atari Cyberball 4-player that I will be selling for a friend. Open to cash offers or possibly trade for a pin.
Quoted from EEE:Is anyone brining game manuals or schematics? I need one for a Bally Medusa.
Swap meet is Saturday morning, 8am. Parking lot. That's your best bet. If you're not coming I'll check for you, just send me a PM.
Any attendee that is willing to drive a few hours south of TPF, I'm offering a nice discount for your trouble (with proof of attending TPF) on my SBM.
https://pinside.com/pinball/forum/topic/for-sale-silverball-mania-12
PM me if interested.
Quoted from EEE:Is anyone brining game manuals or schematics? I need one for a Bally Medusa.
Raymond Jett is going to have a table set up inside and he says he's got 6000 manuals and schematics for sale. Just no Gottlieb tho.
Quoted from mikusm:I have a couple of exhibitor wrist bands to spare. PM me.
I could use one or two..if still available....let me know
I have this clear coated afm playfield with me at tpf. If you’re here and interested, make me an offer.
50F4B2C3-9A4C-47EA-B785-364029DE40B7 (resized).jpeg
0CA50B83-DF54-44A8-B661-3A952834E423 (resized).jpeg
CC6E2E75-7D54-47C3-AB49-E5DEC6450154 (resized).jpeg
67BEEE07-7C21-48DD-95DC-2F9761412131 (resized).jpeg
**** EDIT**** Thanks for the interest. We are needing to leave TPF early tomorrow morning to head home, so the game is going back to Missouri.
I have a Hobbit Smaug that I was planning on trying to sell at the TPF but haven't listed it for sale due to a problem that I encountered with it prior to the show.
I talked to JJP tech support and they said it sound like to them that I was needing a new motherboard . I didnt know if it was going to show up in time before the show, but it did arrive the night before we were leaving for Texas. I installed the new motherboard that night , turned the game on to give it a try and it fixed the problem and plays great., but I noticed one problem, the playfield inserts were not lighting up. The Flashers are working along with a few other lights , but the LED's in the playfield were not. I tried to contact JJP tech support a couple of times Thursday as we traveled to Texas but was unable to talk to anyone.
I did bring the game with me to Texas and have it in my trailer. I bought the game new and it has less than 80 games on it .
I hate to advertise the game for sale since it's not operating properly but I thought I would just mention it in case someone was considering buying a new one which would cost around $8500. I was originally planning on listing it for $7200 but would take $6800 for it to help the buyer to cover the cost of fixing it. It could be as simple as just plugging in a wire that I pulled loose in the installation of the new motherboard or it could be a issue with a board, I just don't know until I talk to JJP tech support next week. I'm planning on just taking the game back home with me and just keeping it for a while but I would sell it if someone wants to save a little money on a practically new game and don't mind on fixing the issue themselves. Just send me a PM if your interested. I,m here at the TPF and would be glad to show it to you in my trailer. I was planning on selling it and buying a Dialed In, so if you have a Dialed In that you would want to trade for it plus cash on my end , I would be interested .
Ron
Would the person who purchased the "project" Pinbot at the swap meet happen to be on here? I need a visor motor for mine at the TPF, and it may have one. If you are willing to sell to get my machine functional again for the fest, we would all benefit... Thx. Or if anyone has one local, Frisco tx...
I have a Pro Football here that needs a screw but is working, I am selling here for $500 but if someone responds from here I will do $450, fun split flipper game that I don't want to have to take back as I bought 2 more pins here!
It’s a connector on the underside of the board that came loose. Should be an easy fix.
Quoted from ronlisa:I have a Hobbit Smaug that I was planning on trying to sell at the TPF but haven't listed it for sale due to a problem that I encountered with it prior to the show.
I talked to JJP tech support and they said it sound like to them that I was needing a new motherboard . I didnt know if it was going to show up in time before the show, but it did arrive the night before we were leaving for Texas. I installed the new motherboard that night , turned the game on to give it a try and it fixed the problem and plays great., but I noticed one problem, the playfield inserts were not lighting up. The Flashers are working along with a few other lights , but the LED's in the playfield were not. I tried to contact JJP tech support a couple of times Thursday as we traveled to Texas but was unable to talk to anyone.
I did bring the game with me to Texas and have it in my trailer. I bought the game new and it has less than 80 games on it .
I hate to advertise the game for sale since it's not operating properly but I thought I would just mention it in case someone was considering buying a new one which would cost around $8500. I was originally planning on listing it for $7200 but would take $6800 for it to help the buyer to cover the cost of fixing it. It could be as simple as just plugging in a wire that I pulled loose in the installation of the new motherboard or it could be a issue with a board, I just don't know until I talk to JJP tech support next week. I'm planning on just taking the game back home with me and just keeping it for a while but I would sell it if someone wants to save a little money on a practically new game and don't mind on fixing the issue themselves. Just send me a PM if your interested. I,m here at the TPF and would be glad to show it to you in my trailer. I was planning on selling it and buying a Dialed In, so if you have a Dialed In that you would want to trade for it plus cash on my end , I would be interested .
Ron
Quoted from Jodester:It’s a connector on the underside of the board that came loose. Should be an easy fix.
Thanks Jody. I will check it over in more detail when we get back home.
Sunday special on Cyberball 4-player: $1100. I have two people interested, but trying to find room for it.
Added over 5 years ago: Cyberball went home with a new owner to a good home yesterday.
Sunday Special.
$5,000 FIRM.
HUO Stern Spider-Man
Signed by Steve Ritchie.
SRP Mods.
68DCFC18-D03C-41D1-97FB-6647EAFFCE09 (resized).jpeg
Anyone know which booth has Pinball Magazine? I thought unigroove told me the Pinside both but Robin said they aren't with him.
Edit : Found them. Pinsound booth.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/2018-texas-pinball-festival-maybe-for-sale-thread/page/8 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chattanooga, TN
