Welcome to the 7th annual Arcade/Pinball charity prize raffle in support of the March of Dimes! I am again running this raffle to fundraise for the March of Dimes, whose mission is to eliminate pre-term labor and the complications associated with it. All three of my nieces were preemies and received care in the NICU, so I am now a life long supported of the March of Dimes.

Thanks to the support of the Arcade/Pinball community I'll be raffling off prizes to those who contribute to the fundraising campaign. The list of prizes is still growing, but here are a few of the vendors donating prizes to the raffle:

Pinball Life
Bob Roberts
Cajun Arcade
CAX
Pinball Expo
Ground Kontrol
This Old Game
Golden Age Arcade Parts

I'll update this thread again with the first batch of confirmed prizes. The raffle will commence at the end of the fundraising campaign on April 26th. Largest donation get first pick of prizes, and then I'll run down the list of participants in order until we run out of prizes.

To participate please visit my personal fundraising home page at:
[url]http://www.marchforbabies.org/deanryanayer[/url]
Make a donation and include your user id on the Arcade/Pinball forums so I can track you down when its your turn to select a prize from the raffle.

Allyson, Hayden & Harper all appreciate your support!!!
march_of_dimes_logo.gifAllyson 2.jpgHayden & Harper.jpg

First group of confirmed prizes:

Documentarian and Arcade Enthusiast Jeff Von Ward has donated a 3 disc DVD/Bluray combo pack of his film "The Space Invaders: In Search of Lost Time". The prize pack also includes a t-shirt, collector pins, stickers.

http://www.thespaceinvaders.org

The Pacific Pinball Museum has donated free admission passes for 2 adults and 2 children

http://pacificpinball.org

The Cajun Arcade has donated a 1940 in 1 board set with cables and manual.

http://www.cajunarcade.com

More prizes to be announced later on in the week.

The Space Invaders t-shirt.jpg

1940 in 1 (7).JPG

Pacific Pinball Museum.png

The Space Invaders movie 3DVD set.jpg

More prizes confirmed:

JammaBoards.com has donated a $100 store credit

http://www.jammaboards.com

Pinball Life has contributed 2 collapsible PinGulp beverage caddys

http://www.pinballlife.com

Game Works has offered up $160 worth of Game Cards valid at any of their locations

http://www.gameworks.com

GameWorksgamecard_zps66f158a8.jpgPinballLifePinGulp_zps4fa367d9.jpg

Golden Age Arcade Parts is donating a wiring harness of the winner's choosing. Either a Jrok Multi Williams or Jrok Berzerk/Frenzy harness.

http://www.goldenagearcadeparts.com/

The California Extreme team as donated another weekend pass for the 2014 show on July 12-13.

www.caextreme.org

Mike Doyle has offered up a 96-in-1 Multipac Kit & ribbon cable!

http://home.everestkc.net/mdoyle/multipac.htm

GoldenAgeArcadeLogo_zps505f8a2f.pngCAXlogo_zps78f06cb4.jpg96-in-1pacman_zpsf2f71625.jpg

!!!!!!GRAND PRIZE Announcement!!!!!

The Grand Prize winner will have their choice of 1 of the following:

VirtuaPin has offered up a complete VirtuaPin Mini machine!!

VirtuaPinlogo_zps6177de57.png
VirtuaPinMini_zps22bf9ea5.jpg
VirtuaPinMinicabinet1_zps04fa2b11.jpg
VirtuaPinMinicabinet2_zpsafcc3b71.jpg
A 'Chip Off the Ol' Block', this mini virtual pinball cabinet is also a CNC-cut, American Maple cabinet of the finest quality you'd expect from VirtuaPin. It plays hundreds of your favorite pinball tables over multiple platforms! Sporting a 27" playfield monitor, 19" 4:3 backglass monitor, and a 7" DMD monitor, you'll feel like you're playing the real thing ... just smaller!
The main cabinet measures 16-1/2" in width, 20-3/4" backbox width, 34-3/4" long, and 37-1/2" overall height, finding a place for pinball in your home has never been easier! The backbox folds down for easy storage.

•100% Genuine WMS cabinet parts
•27" monitor backed by full one-year warranty
•19" Class 5:4 aspect backglass monitor
•7" DMD-style monitor
•Fully optimized for use with multiple virtual pinball platforms
•Intel 3.1GHz Quad-Core Desktop Processor
•Western Digital Caviar Black 500GB 7200 RPM 32MB Cache HDD
•4GB DDR3 1600 Desktop Memory
•EVGA GeForce GTX 560 (Fermi) 1GB 256-bit GDDR5 PCI Express 2.0 x16 Video Card
•600W Power Supply Unit
•2x120W Pyle® Pro Stereo Power Amplifier
•2 4" Authentic Arcade Speakers
•600W Pyle® Subwoofer in the body of the cabinet for authentic 'bump'
•VirtuaPin™ Digital Plunger kit
•Official VirtuaPin™ frontend
•The latest version of Visual Pinball installed
•Guaranteed Workmanship Free of Defects
•Manufacturer’s Warranty on All Parts

Parts subject to change, based upon availability. Pinball tables not included.

http://virtuapin.net/

I will personally be offering the following machines:

Sega Super Masters Golf upright
IMG_2799_zps6e0fffec.jpg

&/or

Mappy cocktail
IMG_2795_zps741f27bf.jpg

*The Grand Prize winner will have their choice of 1 of the 3 machines. Should the person decline the machines in favor of something else in the prize pool it will be at my discretion to offer the Grand Prize machines to the next winner in line. Shipping up to $200 is included on the VirtuaPin Mini unit, anything over that is the responsibility of the winner. Shipping on the Sega Super Masters Golf and Mappy are the responsibility of the winner unless they are located in Southern California or Arizona in which case I will do my best to handle the shipping arrangements.

More prizes to be announced later on in the week!

Prizes, Prizes, Prizes . . .

The folks at the White Rose Gameroom Show have offered up 4 packages that include a show t-shirt & 2-day pass to the 2014 show! The York Show will take place October 10-11, 2014 at the York Fairgrounds and Expo Center in York, Pennsylvania.
TheYorkShowlogo_zpsf289bdca.jpg
YorkShow_zps3713bcb4.jpg

http://www.theyorkshow.com/

Supercade has donated a personalized signed copy of the book "Supercade: a visual history of the videogame age 1971-1984". 448 pages of arcade goodness.

“Great history of arcade and home games during a formative decade of the genre.”

“The book is very well laid out, packed with TONS of history of both the games evolution and of the manufacturers, interviews with the designers, and TONS of pictures.”

Supercadebook_zpsc3b4f6b1.jpg

www.supercade.com

Gameroom Designs Canada is donating a bartop cabinet kit ($150 value) in the design of the winner's choosing along with a matching plexi kit ($50). They are also including free shipping anywhere in Canada, but if the winner resides in the USA shipping is the responsibility of the winner.

Each kit is created from 5/8" MDF, and comes with everything required to assemble your own arcade cabinet, including your choice of control panel (blank, 6-button straight "fighter-style" button or 6-button angled "Asian-inspired" button layout) and admin panel (blank or 3-button layout) configuration. All t-molding slots are cut into the sides, as well as the top, marquee and control panel faces. Slots are pre-cut for plexi installation as well.

The plexi kit includes high-quality clear acrylic plexiglass for the marquee (2 pieces), bezel and control panel.

All the winner will need to add is the electronics and arcade components!

GameroomDesignsCanadalogo_zps71eb8288.png
GameroomDesignsCanadabartopstyles_zps4bc9ace5.png

Donate at:

http://www.marchforbabies.org/deanryanayer

to be entered into the prize raffle (be sure to include your arcade/pin forum of choice along with your ID)

More prizes coming next week!!!

Prize BUMP

Grinkers Grand Palace arcade has donated 2 logo t-shirts
GrinkersLogo_zps4fdbdabe.jpg
Grinkersshirt_zps0e328d60.jpg

http://www.grinkers.com

Bob Roberts has donated four 15amp switching power supplies
BobRobertslogo_zps4f160624.gif
BobRoberts15ampswitchingpowersupply_zps89721075.jpg

http://www.therealbobroberts.net

ArcadeKeyChains.com has offered up 10 custom arcade/pin key chains of the winner's choosing.
KeyChain_zpsd22f245e.jpg
arcadekey2_zpsf8edddbc.jpg
arcadekey1_zps2915578f.jpg

http://www.arcadekeychains.com

More prizes announced later in the week. Donate today to be entered to WIN!!!!

http://www.marchforbabies.org/deanryanayer

Prize Update!

The fine folks at Summitt Arcade have pledged a $100 store credit

SummitArcadelogo_zpsb3eb1992.jpg

http://www.summittarcade.com/

Vector Invader Productions has donated a DVD of the film "The Vide Craze: Where Were You in '82?" They have also included a Movie Poster.

VideoCraze_zps362332c5.jpg

http://www.vectorinvaderproductions.com/#

Barcade has donated a logo t-shirt and a $75 gift card valid at any of their locations (Brooklyn, NY, Jersey City, NJ and Philadelphia, PA)

BarcadeGift-CardHolder_500_zps136b2f1f.jpg
Barcadepanorama_zpscd7e1bcd.jpg

www.barcade.com/‎

More Prizes coming next week! Donate at: http://www.marchforbabies.org/deanryanayer to get entered to win great prizes!!!

BUMP for more prizes

GameRoom Champ has donated some nice related items
GameRoomChamplogo_zpsd768cbb5.png

Viper Solar Blast Electronic Dartboard
GameRoomChampsolardartboard_zpseb94120b.jpg

Fat Cat 500 claytec poker chip set
GameRoomChamppokerset_zps86405d7e.jpg

Automatic 4 deck card shuffler
GameRoomChampshuffler_zps01942ddf.jpg

For all of your Gameroom supply needs visit www.gameroomchamp.com

Chomping Quarters has added the following to the Prize raffle:
ChompingQuarterslogo_zps9fc2e4c6.png

20' of "True-Flat" molding
ChompingQuarterstmolding_zps97ed502a.png
http://www.chompingquarters.com/stor...endo-t-molding

Prize 2

20' of "Off Set" molding

http://www.chompingquarters.com/stor...endo-t-molding

Prize 3

ChompingQuarters T-shirt
ChompingQuarterstshirt_zpsdeb1b33f.png

http://www.chompingquarters.com/stor...arters-t-shirt

More great products from Chomping Quarters available here: http://www.chompingquarters.com/store.php/

Our friends at Arcade Adventures have generously offered up a $100 store credit

jammaboards100giftcertificate_zpsf7dfd9fd.jpg

More arcade goodness available at: http://www.arcadeadventures.com/

Still more prizes . . .

Chris (cnlmoore) from Tokensonly.com has donated a repro stainless Berzerk control panel to the raffle.
TokensOnlylogo_zpsc8ac21e0.jpg
TokensonlystainlessBerzerkPanel_zps94c6b507.jpg

http://www.tokensonly.com/

Rocky Mtn. Pinball Showdown & Gameroom Expo has donated 2 prize packs that include t-shirts and stickers
RockyMtPinballLogo_zpsdc0f541c.png
RockyMtPinballShow1_zpseadb6998.jpg

Check out their show April 11-13, 2014 in Denver, CO

http://www.pinballshowdown.com/

GroovyGameGear has donated a $100 store credit
GroovyGameGearLogo_zps89fb3108.jpg
jammaboards100giftcertificate_zpsf7dfd9fd.jpg

Check out their webstore at:
http://groovygamegear.com/webstore/i...ain_page=index

Donate today to get entered in the raffle!

New Prizes. . .

HobbyRoms is providing programming of any Prom or Eprom for most pinball and video games. Up to 6 chips (max size eprom is 8Mb [27c801] ), and free shipping! A $60 retail value.

HobbyROMSlogo_zpsb6f3df28.gif

www.hobbyroms.com

Inferno Lab has donated 4 prizes of assorted pinball parts:
infernolablogo_zps0e2f880c.jpg

A: "Addams Family" pinball package
InfernoLabAAddamsFamilypinballpackage_zps02e0853d.jpg
1x backbox backglass retainer lock (from Addams Family), used & rusty but works, with 2 keys.
1x entire under-playfield flipper mech from Addams Family top right flipper, Used, Not pretty, but appears to be complete & should have some good usable parts on it (and many that should be junked).
1x entire under-playfield flipper mech from Addams Family bottom right flipper, Used, Not pretty, but appears to be complete & should have some good usable parts on it (and many that should be junked).
2x under-playfield flipper mech from Addams Family bottom flippers. Only the parts replaced in a rebuild kit (doesn't include base & a couple of other parts). Used, Not pretty, but should have some good usable parts on it (and many that should be junked).
1x set of Addams Family slingshot plastics. Used & warped & scratched, but they're intact.
3x Williams "W" yellow flipper bat. All used, all intact, OK condition.
1x bright red flipper rubber. Looks new.
1x black flipper rubber. New.
1x assembly of 4 momentary switches & bracket from Addams Family coin door. Suspected bad. Maybe good parts.
1x opto(?). Small PCB w/ white housing & LED emitter or collector. Used/new?
1x used Williams white AE-27-1200 coil w/ used sleeve, working?
4x leg leveler, used, rusty, intact; 2 have nuts
12 x leg bolt, rusty, used
Set of ROM chips: 1x U6 aftermarket TAFG program ROM (known working), 1x U18 factory TAF sound ROM (known working), U15 & 1x U18 aftermarket TAFG sound ROMs (couldn't get to work--assumed bad)

B: "Meteor" pinball package
InfernoLabBMeteorpinballpackage_zps9f6d2939.jpg
1x set of Meteor used parts, all with yellowing/wear: 2x "Advance 1 When Lit" passive bumper cap, 1x red star pop bumper cap, 1x white "beehive" shooter rod housing.
1x Stern TA-100 Rev B Rectifier PCB. Broken but clean. R1 resistor broken. Maybe other problems. Should have other good parts or be repairable--not trashed. From a Meteor.
1x Bally white flipper bat (from Meteor). Used but intact & clean. Light use--believed to be installed by previous owner, but I took it out & put in black bats.
2x purple flipper rubber. Light use.
1x yellow flipper rubber. Used, some grunge.
1x mystery plunger/lever/connector/compression spring, from Meteor--ball trough kickout?, used

C: "Medusa" pinball package
InfernoLabCMedusapinballpackage_zpscc68227c.jpg
2x Medusa/Firepower II Bally clear red flipper bats/shaft. Used, much set screw wear on shafts.
1x rare green Medusa transparent green round stationary target assembly, used but pretty clean
1x rare red Medusa transparent red square stationary target--target paddle only, broken
1x yellow square deep stationary target assembly, used, but pretty clean
1x green round stationary target assembly, underside mount, new
1x transparent red rectangular stationary target--just the red plastic target part, with hole, I think it's new
1x a small mish-mash of new/used stationary target parts

D: "Misc" pinball package
InfernoLabDMiscpinballpacakge_zps0ad12884.jpg
8x "normal" pinball ball, slightly used, good condition
2x 077-5101-00 Bayonet Base 2-Lead Sockets With Short Mounting Bracket For #89 Bulbs. Brand new, unused extras, bought from Pinball Life.
2x gray vinyl switch cover, new. Looks like Marco P/N 20-9646-G
1x used Williams yellow AE-23-800 coil w/ used sleeve, working?
1x used Williams German orange FL 11629-TYP 2 ELEKTRONIC coil w/ 2 used diodes & used sleeve, worked when pulled from machine
1x rectangular body of orange Push To Reject mechanism, no front panel that traps artwork, looks new
1x transparent red rollover lane cover, looks new, I think I got it for RFM but didn't need it
2x black rubber shooter rod tip, new
5x white rubber cap post nut, lightly used
9x black rubber cap post nut, new
20x black o-ring rubber assortment, ranging from 1/4" ID to 5/8 ID, all new
1x used black mushroom head shooter rod, some wear

www.infernolab.com

ArcadeFixIt was donated two prizes.

1 Pac Man theme goodie pack ($75 retail value)
ArcadeFixIt2_zps9dd81d1f.jpg

1 Space Invaders goodie pack ($75 retail value)
ArcadeFixIt1_zpsca0075ae.jpg

Check out www.arcadefixit.com for tons of NOS parts

More Prizes to be announced next week! Please donate to get entered to win at:

http://www.marchforbabies.org/deanryanayer

Thanks for the recent donations! Here are even more prizes that will be available in the raffle:

TNT Amusements has donated a lot of 5 working power supplies.
tntamusementslogo_zps0ee08478.png
tntamusementspowersupplies_zpsf3091a9e.jpg

There are five clean working 100% power supplies to cover all types of arcade games. All of them have at least 3 common voltages and some as many as 5. These will fit Golden Tee Golf, Merit Megatouch, common older video games that use a screw terminal power supply, and newer machines that use hard drives.

www.tntamusements.com

Ground Kontrol Classic Arcade has offered up 3 prize packs that include a $20 gift certificate, Ground Kontrol t-shirt, can koozy, pins, and stickers.

groundkontrollogo_zpsc32b9f5b.png
GroundKontrolprizepack_zps24a4feca.png

www.groundkontrol.com/‎

Dream Authentics has contributed a Tornado Spinner

DreamAuthenticslogo_zps369ba567.gif
DreamAuthenticstornadospinner2_zps8779e70f.jpg

The Tornado Spinner is the world’s first ultra smooth gaming spinner. Totally custom made, the tornado spinner is primarily used for arcade games like Tempest and can even be used as a steering wheel for driving games. It has an extremely smooth and effortless spin that is perfect for emulation and PC gaming. The Tornado spinner comes with all cables and adaptors necessary for both USB and PS2 port connections. We also offer a TTL board version that will connect to your Opti-Pac or Mini-Pac.

www.dreamauthentics.com/

To be entered into the raffle donate at:
http://www.marchforbabies.org/deanryanayer

mfb-logo-250x80_zps9463d3b7.png

Another prize BUMP!

Gameroom Junkies has donated a set of seven minimalist arcade/pinball posters to the raffle. Pinbot, Machine Bride of Pinbot, Pacman, Frogger, Burgertime, Gauntlet, and Dig Dug.
GameroomJunkiesposters2_zps57dfb3c6.jpg
GameroomJunkiesposters7_zpsc028e22f.jpg
GameroomJunkiesposters4_zpsdbbccbdf.jpg
GameroomJunkiesposters5_zpse21a6052.jpg

Visit www.gameroomjunkies.com for more amazing posters and their world famous podcast and gameroom showcase!

Arcade Metal Parts has contributed a Tempest to Major Havoc conversion control panel and 2 Atari power brick panels.
Arcademetalpartslogo_zpsaa365ce4.jpg
Arcademetalpartscontrolpanel_zpsbdf29dc3.jpg
Arcademetalpartspowerbrick_zps0538c326.jpg

Be sure to keep an eye out for more quality metal reproduction parts from Troy at Arcade Metal Parts!

KLOV member Silver Unicorn has donated the following to this year's raffle:

Bubble Bobble t-shirt (size XXXL)
SilverUnicornt-shirt_zps49685aea.jpg

Cirqus Voltaire pinball flyer signed by John Popadiuk
SilverUnicornCVflyer_zps24adc91f.jpg

20 used $0.25 coin mechs
SilverUnicorncoinmechs2_zps268f61a6.jpg

Grab Bag of misc. electronic components. Diodes, capacitors, chips, resistors, etc.
SilverUnicornelectronicparts1_zps9486702e.jpg

Donate today for your chance to win!

http://www.marchforbabies.org/deanryanayer

About 2.5 weeks until the raffle and I'm about $3K from my fundraising goal Hopefully there are still some of you out there that have not yet donated and want to get in on the action. The retail value of the prize pool is over $7,000 this year so far!!!

Here is another prize bump:

Pinball Expo (Chicago) has donated a complete registration package for the 2014 show
Oct. 15-19.
PinballExpologo_zps168f81c6.gif

The registration package includes all seminars, entrance to the exhibit hall, entries into the Flip Out tournament, the Stern Factory Tour and banquet.

http://www.pinballexpo.net/

KLOV member Crazy Climber has donated a set of his CNC Asteroids tiles
CNCAsteroidsset_zps67969305.jpg
CNCAsteroidsset3_zps8ee36699.jpg

http://forums.arcade-museum.com/showthread.php?t=281175

Paradise Arcade Shop is donating an Icade LED set
ParadiseArcadeShoplogo_zps271dfd13.jpg

The set includes:

2 led joysticks
ParadiseArcadeShopled-joystick_zps2ca0888f.jpg

2 universal mounting plates
ParadiseArcadehopuniversalmountingplate_zps3353397a.jpg

6 LED action buttons
ParadiseArcadeShopledbuttons_zps71c53ae3.jpg

Player 1 & Player 2 LED start buttons
ParadiseArcadeShopledplyr1_zpsaf0a01ef.jpg

JAMMA harness
ParadiseArcadeShopjammaharness_zpscd51f4f4.jpg

Power Supply
ParadiseArcadeShoppowersupply_zpsba8b44d3.jpg

and an Icade XX-in-1 game board
ParadiseArcadeShopIcadepcb_zps3fee155b.jpg

http://www.paradisearcadeshop.com/

Donate today at http://www.marchforbabies.org/deanryanayer to get entered into the raffle and support the March of Dimes!!!

Prize update:

Mezel Mods has donated a $100 store credit

MezelModslogo_zpscbfa0b52.png

MezelModslightningshooterrods_zpsf6c614f2.jpg
MezelModsDuffCan_zps86a1aba3.jpg

Visit http://mezelmods.com/ to check out their custom pinball mods and accessories

KLOV member Jr. Pac has donated a reproduction Pac-Man Mini Control Panel Front art.

JrPaccabaretfrontart_zpse566315d.jpg

Printed via vibrant solvent inkjet process onto plotter-cut adhesive-backed Scotch vinyl, these characters are three sections bound together by a single sheet of premask to ensure exact placement. Peel and stick to a freshly painted control panel. Artwork recreated exactly to the original.

Alltek Systems is contributing an Ultimate MPU Board

AlltekSystemslogo_zpsb5e911d4.png

Direct replacement for Bally® AS2518-17, AS2518-35, AS2518-133, and Stern® MPU-100, and MPU-200
• All late model Bally® and Stern® pinball machine proms preprogrammed in a Single Chip. That is over 90 games on one chip, the most games of any replacement board on the market. Just select the game you want using a dipswitch.
• Only board to incorporate FREEPLAY mode for all Bally machines.
•No batteries needed. Never have battery damage again. Simtek chip with 100 year memory retention

AlltekSystemsultimate-mpu-board_zps9c6aca12.jpg

The rest of the board spec are here: http://www.allteksystems.com/product...ments.html#mpu

Visit http://www.allteksystems.com/ to see the other replacement boards they have developed.

Bartop Arcades has donated a 1 Player flatpack cabinet kit.
BartopArcadeslogo_zpsc425f874.png
BartopArcadesprizedisassembled_zpsa8e82d74.jpg
BartopArcadesprize_zpsfa504540.jpg

Custom built 1 player bartop cabinet flat pack. Fully compatible with Arcade multi boards and Mame.

The sides are cut from 3/4" birch. All other pieces are made from 1/2" birch.
Control panel can be cut to your liking.
Each unit comes pre-primed and ready for painting.
Monitor of choice is a 17" which can be mounted vertical or horizontally.
Includes: T-Molding slot cut and t-nuts and bolts for Control panel

Dimensions:
18" L x 18.5" W x 27-1/2" H

$170 retail value plus free shipping within the U.S.A

www.bartoparcades.com

Visit: http://www.marchforbabies.org/deanryanayer to donate and be entered into the prize raffle.

This Old Game has donated a plethora of arcade t-shirts!!
ThisOldGameLogo_zps023aa8c0.gif

These shirts will be given away by size. So select your size and receive all 3 shirts in that size! (t-shirt colors may vary)

Small:
Rally X
Midway Ringer T "Video is my Game"
Death Race (Glow in the Dark)
DeathRace_zpsc90c990e.jpg

Medium:
Star Castle
World Pong Champion
Red Baron
RedBaron_zps1d0c7b34.jpg

Large:
Joust
Joust_zps0536be9a.jpg
Atari Football
Berzerk

X Large
Black Widow
Defender
Defender_zpsf6315b0f.jpg
Mappy

XX Large
Ms. Pac
Super Pac
Skee Ball
IMG_3799_zpsfdac8f84.jpg

XXX Large
Sinistar
Mortal Kombat
Varkon
Varkon_zpsca7f8eb7.jpg

Visit http://www.thisoldgame.com/ for more great Arcade t-shirts and top notch reproduction art work!

Raffle closes this Saturday, April 26th so donate today to WIN! Visit my fundraising homepage and donate to be entered into the raffle (be sure to include your screen name which arcade/pin forum you are most frequent on): http://www.marchforbabies.org/deanryanayer
MOD Thank You.jpg

Bump It!

Radio.gif

Only 2 days left to donate and get registered for the raffle! Don't miss out!

Didn't quite reach my goal of $6,000 but I'm very happy with the number of people who participated and my total of $5,378 raised! The prize raffle has begun and the Grand Prize Winner has been notified. The raffle will proceed down the list as each subsequent winner selects their prize. Please keep an eye out for an email or PM from me when it is your turn to select a prize.

Thanks again to all of the prize sponsors for contributing such a great lot of items this year, without you this raffle would not be possible. And thanks to everyone who participated for supporting the March of Dimes and making a difference in babies' lives.

MODThankyou_zps67d23c0f.png