The two flashers in the upper left of the playfield are not working in game play or during the diagnostic test. All other flashers work.
I replaced the bulbs so it’s not that.
Any suggestions of where to start looking for a fix?
The two flashers in the upper left of the playfield are not working in game play or during the diagnostic test. All other flashers work.
I replaced the bulbs so it’s not that.
Any suggestions of where to start looking for a fix?
I’m not familiar with Diner so I don’t know the number of the ones you are referring to. Take a look at the manual/schematics on IPDB. If all wiring is good I would suspect U1 (Opti isolator) on the interconnect board. I had a similar problem on my Jokerz! and U1 fixed it.
Quoted from Leosac:Any suggestions of where to start looking for a fix?
Bad or unsoldered resistor on the innerconnect board. If you figure out which flasher number they are I can tell you which resistor to test.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/2-diner-flashers-out-?hl=thewiz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.