(Topic ID: 193061)

Rollergames diverter and drop target coils are dead

By sethbenjamin

7 years ago



Topic Stats

  • 2 posts
  • 2 Pinsiders participating
  • Latest reply 7 years ago by Andy_B
  • No one calls this topic a favorite

You

Linked Games

#1 7 years ago

So, I just completed a full-on Rollergames restoration. Finally got the entire playfield re-assembled, had CPU and Aux. Driver boards checked out (both are good to go), and yet, when put the game in Coil Test mode, 2 coils don't activate and 2 flashers don't light. The flashers are solenoid 03C and 04C (switched solenoids), and the coils that don't work are the ramp diverter (coil #18) and the drop target reset (06A). It is possible that the flashers are simply burnt out bulbs; I realize as I type this that I need to swap out the bulbs to make sure those aren't the problem. But the coils I can't figure. Is this simply a matter of needing to re-flow the solder? That would be great.

#2 7 years ago

Check the easy stuff first - make sure the bulbs are good and that you have voltage to the coils. It should be 50v for the diverter and 25v for the drop targets.
I'm just finishing my RG off after re-decalling the cab ☺

Andy

Promoted items from Pinside Marketplace and Pinside Shops!
Trade
Machine - For Trade
Philadelphia, PA
$ 27.00
Electronics
Yorktown Arcade Supply
 
From: $ 19.99
Eproms
Matt's Basement Arcade
 
$ 12.50
Lighting - Led
RoyGBev Pinball
 
Wanted
Machine - Wanted
Red Oak, TX
$ 18.95
Eproms
Pinballrom
 
$ 95.00
Cabinet - Sound/Speakers
Pinball Mod Co.
 
Wanted
Machine - Wanted
Lafayette, LA
2,000 (OBO)
Machine - For Sale
Carl Junction, MO
$ 1.00
Pinball Machine
Pinball Alley
 
$ 27.95
Eproms
Pinballrom
 
Hey modders!
Your shop name here

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.