Hello folks, Williams Gorgar that i just picked up - the left flipper was working but crapped out after a few games. I had adjusted the flipper shaft (made the flipper a little higher off the pf) and it worked again for a short while but died again. Im thinking its likely the contacts next to the buttons, as the left flipper contact is visibly bent away from the button.
Also, on both flippers (when working), they tend to get loose quickly and are never super solid - making bounce passes etc very hard. Dont think its because I havent tightened the shafts enough..
Ive attached pictures of the contacts and flipper mechanisms, any help would be greatly appreciated -Kevin