I'll join the club.

DSCN2515 (resized).JPG

DSCN1542 (resized).JPG

Here is some paperwork I found in my package. There is a ring chart too.

479CC0DB-4FD3-45CB-8CF6-CAAF9C41F572 (resized).jpeg

95447ACE-C391-4070-AAFE-6AD3D7C95F2B (resized).jpeg

B76E6C8E-9331-4AB3-BE26-CA8ED3787C6F (resized).jpeg

It's not always best to go by the ring chart. It's good have every size in stock for custom fit.

All of my games have white rubbers and playfield white rubber post caps.
6E1F182D-879C-48D3-A548-974366C3DBBB (resized).jpeg

Not all my 2" flippers have double rubbers. It works for me on my Bank a Ball. I do also have a white rebound rubber and like the look too.

The cigarette ad i have a connection to. I worked there at Coin Amusement in the late 1960's early 1970's. I restored a Bank a Ball for guy older man in my town for free and on his Bank a Ball was this sticker. After i completed the restoration he told i could swap my Bank a Ball card tray for his card tray.

The factory original flippers look nice.

It looks like flippers can be adjusted back towards the card tray a tiny bit more.

If you look closely at the flippers where they rest at the moment, you can see where to adjust them to by the lighter color shaded area where the factory original flippers use to be.

Yes...a little lower.
Take a look at some of the other pictures in the posting of the Bank a Balls. Hopefully you can see that yours are slightly higher then the others.