You're currently viewing posts by Pinsider pinhead52.
Click here to go back to viewing the entire thread.
Quoted from Fogcity:Hi. All of a sudden the game won’t fire up. If I trip the coin switch, the lights light, motor turns, but then abruptly stops and acts as if the machine isn’t plugged in - completely dark. I can do this over and over again but the reset sequence never finishes and the game goes dark. It’s set for free play, for what it’s worth. The fuses look good, cleaned relay arms, but nothing. Any ideas?
check your slam switches, door and bottom board.
Quoted from Fogcity:Is it actuated by the ‘start button’? That one looks good...
Also, if I hold down the coin trip switch the motor turns as long as the switch is pulled down. When released, game goes dark.
Yea, start switch overrides the slam switch, ie you can start a game when its powered off. You'll see a weight on a contact behind the door start switch, make sure this is tight and clean. Also there is the kickoff switch, all three of these switches are in series. Also if your 110v hold relay died then its not holding in. Normally toward the front of the bottom board and only has a 110v single contact set. An alligator jumper across the contacts would tell you if this is so.
Cir dia? The issue is most likely in the 110v section. I can get out my Ks&Qs dia if you dont.
You're currently viewing posts by Pinsider pinhead52.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/1965-bank-a-ball-problem?tu=pinhead52 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Colleyville, TX