Chuck, when i had my AC/DC that is exactly what i did with a piece of mylar. I took the mylar and put it over the plastic of the mini playfield lightly. Traced the playfield onto the mylar with a Sharpie. Peeled off the mylar and proceeded to cut it on my cutting mat with an Exacto. After finishing the cutting of the mylar, I laid it over the playfield. It was a bit foggier and not as clear, but it still looked good and prevented the plastic that cannot be replaced from being scratched.

Install and Review of The Munsters pinball topper :

Blog Post :
https://pinballsupernova.wordpress.com/2019/11/12/mods-sterns-the-munsters-pinball-topper-review-install-and-overview-video/

YouTube Video :

Raven Activated (resized).jpg

Title (resized).jpg

Topper (resized).jpg

Topper 3 (resized).jpg

Thanks Who-Dey for the positive comments. Much appreciated.

Yes you are right. I noticed it also after watching the video. My friend fixed the issue with the Lilly flasher. Seems like something was loose and needed to be tightened down. Seems to be working now. thanks for watching the video.