Quoted from Jnyvio:Ok, This is just too weird... Upon starting a new game.. The lower playfield's "?" (Question mark) is now continuously flashing Red and the timer is displaying "10" until i release the ball then the time changes to "--" marks.. Is my code glitched in some way?? It was not doing this before.
[quoted image]

Quoted from cabal:

from my oppinion addams and munsters do not match theme wise. there are addams lover and munsters lovers, but never heard of people liking both, but this is only my personal oppinion. as a full blooded munsters fan i would never put an addams beside the pin
But i am very interest how others see it
An addams retheme will be interresting and maybe make a lot of peple happy, but i will have to compare to the existing addams and this will be very hard.

Quoted from GoldenBeard:

Still looking for Munsters topper and the shooter rod if Anyone wants to part ways…

Quoted from fhk:

Hello, where can i get this plastic? THX!
[quoted image]
[quoted image]

Quoted from C0untDeM0net:

My cliffy finally shredded just like the original 2 scoop protectors from Stern. I had to take it out and re-bend it to shape nearly every 1000 plays. I usually knew when I started getting a lot of scoop rejects it was time to rebend it but this time the metal actually sheered on the left lip that goes into the scoop area and it had to be replaced. I know Cliff is pretty backed up so I started looking for a different option and came across the ninjacamp mods thread where they did all that work on the rush scoops. I remembered a long while back someone in that thread had asked if they made a munsters one so I asked again and received a pm from on of the ninjacamp folks saying it was never finished. I offered to be a tester.
They sent me a few different color options as I was having trouble picking. All of the color options work actually quite well. My favorites ended up being the black and purple but the green color is on the pro playfield in several areas and the red matches the red trim color around the scoop.
[quoted image][quoted image][quoted image][quoted image]
Install is pretty easy. Just push it through then secure with 2 screws under the playfield that help hold in the sides and the 2 existing screws in the back where the original protector was secured. I really like that it covers the entire playfield depth and not just a tiny lip near the top like the cliffy. I've put a good number of games on it since installing and I'm quite confident this is rejecting a lot less than the stock scoop protector or the cliffy. Now we'll see how well it holds up in the long term. Here's a pic fully installed and back together.
[quoted image]
I don't know if Ninjacamp plans on selling these for munsters but I did send them a few small tweaks that would be good to help make the install easier and also cover all of the artwork. I don't think the scoop on my machine is perfectly square when it comes to the artwork.

Quoted from Flippingr8:

Plastic #19 - the one that covers the ball capture magnet by Herman and surrounding areas on both sides - broke at a weak spot from a ball strike a few wks ago. So I bought a replacement plastic and even an airball plastic protector that goes over the main part, got it installed, and wham-o, broke on the very first ball of the first game I played, in the exact same place! Ughh! Anybody else dealt with this / any ideas? There is no other good way to support the broken fragment so maybe it would be best just to forget about it?
[quoted image][quoted image]

Quoted from Rjennings:

Anyone happen to know where you can get the full 19 piece plastic protector set from? Mezel shows out of stock.