Quoted from drained:The non-factory hole is.
Na............just use this......................JUST KIDDING
wood filler (resized).jpgQuoted from drained:The non-factory hole is.
Na............just use this......................JUST KIDDING
wood filler (resized).jpgQuoted from chuckwurt:No but drilling a new hole is. Haha
Looks like holes are pre-drilled... just move the posts...
Quoted from Ifpaadam:Are there any premiums in the world yet?
Not yet, it'll be a week or two looks like.
Quoted from JMCFAN:There are 2 factory holes right?
Correct but a pinsider a few pages back drilled new holes for a different experince.
https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/29#post-4869165
Quoted from drained:Correct but a pinsider a few pages back drilled new holes for a different experince.
https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/29#post-4869165
Missed that.... might move mine... but no drill...
Quoted from waldo34:Anyone have a solution for the ball launch. it's beating the heck out of my ramp. Hard to see in the photo but the bottom side is chipped already.
[quoted image]
See this post: https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/29#post-4868475
LEs have been arriving with that part ground down a bit to prevent this. I believe others have contacted Stern or their distributor for the Pro models, and the recommendation from Stern was to use a Dremel or similar to do the same. Someone else on this board sunk this into their play field...
Quoted from J-drum11:To me it just felt a little empty!
I like everything else about it .
I rather have a color machine.
I’m not bashing it by any means. I really was looking forward to it and was hoping the premium was going to be color so, that also throws my decision off!
As for seeing a premium or le in person? It will be highly unlikely at the places I go to so, I was trying to get more input because, I may have to wing it if I decide to go for a premium or LE .
It’s the theme that keeps drawing me in.
Huge Munsters fan!
you know the answer...
Quoted from JMCFAN:Looks like holes are pre-drilled... just move the posts...
He added a third. Haha
Quoted from Blacksun:Trying out translucent glow green Titans... like them so far.
[quoted image]
Nice flipper bats ! Where did you get those
Quoted from kidchrisso:Ok LE owners, I would advise you do this and try it out. Earlier today I was playing my FG. When I started the Stewie upper pinball playfield, it felt so much better than the lower playfield on Munsters. The shots felt a lot closer to a normal pinball machine feel. Do yourself a favor, go into your settings and adjust the lower playfield flippers to "soft". It made a huge difference to me in feel and how it plays. The ball is not flying everywhere and your shots feel more controlled. The ramp will register everytime with out that ball feeling like it was launched from a cannon. I also adjusted my upper flippers to "soft" as well. Game play is so much better IMO. Just try it out and report back. I could not find an adjustment to the auto launch by hitting the zap button. I think that could use some dialing down as well. Let me know your thoughts....
Kidchrisso..Slap_Save_Podcast.
Took your advice...works much better. I also adjusted the main playfield flippers to "soft", I was having a hard time making the Grandpa scoop shot, it would hit and bounce out...even the straight on shots. The factory had the flippers set to "hard", it was like firing cannon balls at my machine..."soft" seems more normal with plenty of flipper...and the Grandpa shots aren't bouncing out as much.
Forgot to post in this one also. Im in the club. Loving the game so far and I really like the lower playfield. Game has great flow and the screen clips bring back a lots of memories. This game was very well done and I do hope they do a little more with the code. If anyone in the area wants to stop by and play this weekend shoot me a PM. Wife is gone until Saturday night
Bill
IMG_4681 (resized).JPGIMG_4682 (resized).JPGIMG_4683 (resized).JPGIMG_4684 (resized).JPGIMG_4685 (resized).JPGIMG_4686 (resized).JPGIMG_4687 (resized).JPGIMG_4688 (resized).JPGIMG_4689 (resized).JPGIMG_4690 (resized).JPGIMG_4691 (resized).JPGIMG_4692 (resized).JPGIMG_4693 (resized).JPGIMG_4694 (resized).JPGIMG_4695 (resized).JPGIMG_4696 (resized).JPGIMG_4697 (resized).JPGIMG_4698 (resized).JPGIMG_4699 (resized).JPGIMG_4700 (resized).JPGIMG_4701 (resized).JPGIMG_4702 (resized).JPGIMG_4703 (resized).JPGIMG_4704 (resized).JPGIMG_4705 (resized).JPGIMG_4706 (resized).JPGIMG_4707 (resized).JPGIMG_4708 (resized).JPGIMG_4709 (resized).JPGIMG_4710 (resized).JPGQuoted from Lawnboy:If anyone in the area wants to stop by and play this weekend shoot me a PM. Wife is gone until Saturday night
Around these parts we call that being on Spring Break. Congrats!
just saw that munsters 0.91 code is up for LE and Premium, date March 6:
https://sternpinball.com/support/game-code/
no read me files and no pro
Quoted from KLR2014:just saw that munsters 0.91 code is up for LE and Premium, date March 6:
https://sternpinball.com/support/game-code/
no read me files and no pro
Pro is at .91
Quoted from MK6PIN:LE shipped w .91
Yup mine is at .91. Where can I find instructions on updating the code once new code is released..?
Quoted from JMCFAN:Yup mine is at .91. Where can I find instructions on updating the code once new code is released..?
Sterns website has download instructions and installation instructions are in the backbox
Quoted from Puffdanny:Sterns website has download instructions and installation instructions are in the backbox
thanks!
Quoted from ShinyBall:Got to play my 1st Munster Madness..Wowza like 4th of July. Game is sick.
Right?
Quoted from whitey:Nice flipper bats ! Where did you get those
Are you referring to these?
Quoted from kidchrisso:Dont get it? Did someone F up?
[quoted image]
What’s the reade me say? Could be a bad file name.
Quoted from whitey:Nice flipper bats ! Where did you get those
Thanks, they are from the ModCouple... Also bought the eye which is pretty kewl... Probably gonna grab the Grandpa' Electric Chair.
https://themodcouplepinball.com/collections/the-munsters-collection
Quoted from chuckwurt:What’s the reade me say? Could be a bad file name.
Didn't see one..
Quoted from kidchrisso:Dont get it? Did someone F up?
[quoted image]
Is that new code? What’s the current revision?
Quoted from cooked71:Is that new code? What’s the current revision?
Current is 0.91, the date in the pic was from 2 days ago. That code came out a month ago....confused yet?
Quoted from chuckwurt:The new code should be .96 when it’s released. Maybe they just uploaded the wrong one.
I assumed they never had any code on the site so put up the current .91
How do you know its gonna be .96? Any insight to what's inside ? I am gonna plead to Dwight/Stern they add a final wizard mode after stage 3 of Munster Madness at the very least..
What I don't understand is why only 2 stages to the characters ? When there is a 3rd stage munster madness.
Quoted from drained:I assumed they never had any code on the site so put up the current .91
How do you know its gonna be .96? Any insight to what's inside ? I am gonna plead to Dwight/Stern they add a final wizard mode after stage 3 of Munster Madness at the very least..
What I don't understand is why only 2 stages to the characters ? When there is a 3rd stage munster madness.
You sure the level 3 modes aren’t different? I haven’t been to that point yet.
One thing I will say is MM I and MM II are very different now.
Quoted from kidchrisso:Ok LE owners, I would advise you do this and try it out. Earlier today I was playing my FG. When I started the Stewie upper pinball playfield, it felt so much better than the lower playfield on Munsters. The shots felt a lot closer to a normal pinball machine feel. Do yourself a favor, go into your settings and adjust the lower playfield flippers to "soft". It made a huge difference to me in feel and how it plays. The ball is not flying everywhere and your shots feel more controlled. The ramp will register everytime with out that ball feeling like it was launched from a cannon. I also adjusted my upper flippers to "soft" as well. Game play is so much better IMO. Just try it out and report back. I could not find an adjustment to the auto launch by hitting the zap button. I think that could use some dialing down as well. Let me know your thoughts....
Kidchrisso..Slap_Save_Podcast.
Great tip!!! My uppers and lowers were set to "hard" , ended up w " normal" up top and "soft" on lower....gameplay much more under control now...love this thing!!! thanks again....mark
Quoted from Rozeks:Received our LE today. Haven’t had much time with it yet, but my buddy Baxter approves. It really is stunning.
[quoted image][quoted image]
Hi Baxter! Hermann says Hi
22BCDCC9-FBEA-4C5C-8B22-82E0EB3EAD8B (resized).jpegQuoted from Rozeks:Received our LE today. Haven’t had much time with it yet, but my buddy Baxter approves. It really is stunning.
[quoted image][quoted image]
Baxter is wise... a great Bud to have!!!
Quoted from EricHadley:Hi Baxter! Hermann says Hi
[quoted image]
Hermann?...and is that an empty cupcake wrapper next to him!!! He too, is wise......
They look amazing! I honestly believe that the Munsters could be the best looking pinball machine of all time. Chris Franchi flat out killed it on this game here.
Quoted from 1956PINHEAD:Didn't have to drill any extra holes mounting them either
[quoted image][quoted image]
Awe come on man ..... geez your standards are dropping below what we expect from you
They look brilliant by the way
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/31?hl=jeep-mustang and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.