(Topic ID: 233776)

1313 Mockingbird Lane ~ MUNSTERS Club.

By Monte

3 years ago


Topic Heartbeat

Topic Stats

  • 11,233 posts
  • 546 Pinsiders participating
  • Latest reply 1 hour ago by freddy
  • Topic is favorited by 196 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

FB_IMG_1653076812734 (resized).jpg
IMG_5072 (resized).jpeg
20220504_143206 (resized).jpg
8B8C03BC-1EA6-4C3A-9CC6-34E708E33288 (resized).jpeg
90E21905-3BAF-422E-8BEC-340B0DE8FD26 (resized).jpeg
B1DF1F57-0A5E-42CA-BBB0-15D9774610A2 (resized).jpeg
BCBA6E0C-ABB9-4D40-97D5-CC0586FAC256 (resized).jpeg
pasted_image (resized).png
pasted_image (resized).png
FT - The Munsters 2 (resized).jpg
FT - The Munsters (resized).jpg
blk (resized).jpg
05E20A58-491A-4686-90D5-FA4AC9A4B36A (resized).jpeg
9B0DDCC2-4960-489E-BFBA-99712E80B7F5 (resized).jpeg
2867C270-A5FF-4242-A328-AEF0BA1CCF0B (resized).jpeg
7AE1E626-0ED0-4481-9E4A-AA391B045152 (resized).jpeg

There are 11,233 posts in this topic. You are on page 205 of 225.
#10201 8 months ago
Quoted from freddy:

I believe the center “card“ is a sticker.
Out of town so can’t verify at the moment
Although it would look cool with out the yellow warning .

Ok, Thank you... It is a card.. Let me know.. Have a safe trip.

#10202 8 months ago
Quoted from ralphwiggum:

I keep all my designs in one thread....
https://pinside.com/pinball/forum/topic/lenticular-apron-cards
In that thread there is a set of Walking Dead done with the clear backlit with EL Paper- https://pinside.com/pinball/forum/topic/lenticular-apron-cards/page/4#post-6321038
Hopefully that helps a bit.... Any other questions, just let me know.
Thanks, Tim

Thank you! Those look great!

#10203 8 months ago
Quoted from Jnyvio:

Ok, Thank you... It is a card.. Let me know.. Have a safe trip.

It’s a sticker!!!!!!!!

#10204 8 months ago

The yellow on the sticker is gone!!

1C7CB88C-997E-4BFA-A318-811471D7A972 (resized).jpeg3ADC3CDE-233E-49F9-A936-E4275338CF10 (resized).jpeg
#10205 8 months ago
Quoted from Ricmaz:

The yellow on the sticker is gone!!
//<![CDATA[
window.__mirage2 = {petok:"359871ea7550d87fba339f501fcd726d2b3dd072-1630812732-1800"};
//]]>
Lenticular would take that apron over the top!

[quoted image][quoted image]

Lenticular would take that apron over the top!

#10206 8 months ago
Quoted from freddy:

It’s a sticker!!!!!!!!

Ok, Thank you for verifying that.

#10207 8 months ago

Finally……..well, if we can’t get new code at least YouBentMyWookie has filled the void those unsightly yellow cards left on my apron. These cards are truly the best on the market. My pics just don’t do them justice. Have them on all my pins!! It’s worth buying this pin, if you don’t have it already, just to have these cards….

0A7D0C06-1A93-450C-841C-23365939068A (resized).jpeg28EEAA50-32CC-4911-BADE-69918F7CFE4C (resized).jpeg438C2C02-76ED-40EA-95E9-3C06E161BD1A (resized).jpeg75DD2265-CC61-41BC-9CC4-95A61ACF93FE (resized).jpeg
#10208 8 months ago

Well our fab Munsters will go up in value, as Stern just moved it to the archive section on their website.

#10209 8 months ago

I just got my new premium color and seen we’re a seller had a new premium color listed for 12000$ I was like holy cow I thought maybe I need to sale mine but I can’t I love it to much n the whole family does to

#10210 8 months ago

You bent me black and white!!! Lol
Thanks Tim

22A2956F-B378-46B8-AD0C-56D8C61EC639 (resized).jpeg3A8F7DFF-B182-4B49-9F58-93DC70B1C156 (resized).jpeg411EFEA4-60E2-480E-A8DA-E746EFC0C156 (resized).jpeg43D1076D-5608-450F-885B-458F5A1B8644 (resized).jpeg7FE12F89-2C74-440C-AEE4-8A479BE27FED (resized).jpeg9CE949D2-4C6A-4F80-8EFD-D833044C4A79 (resized).jpegC00CCFFA-CE93-4D0A-9055-92E1CD6CEC98 (resized).jpegC8B3A57B-7C76-4557-846B-52FDE46C4727 (resized).jpegF03F2445-DB86-4C40-9655-6EE374CE825E (resized).jpeg
#10211 8 months ago

I wish I got my munsters. Stern shorted my distributor and said they will run it again sometime next year to fill the back orders. Of course that will be after the price increase. I sure hope Stern keeps their word and does fill the orders they shorted or I'm going to be pissed.

-1
#10212 8 months ago
Quoted from Hammerhead1550:

I wish I got my munsters. Stern shorted my distributor and said they will run it again sometime next year to fill the back orders. Of course that will be after the price increase. I sure hope Stern keeps their word and does fill the orders they shorted or I'm going to be pissed.

Better to be pissed than to be pissed on!
Just find a HUO game

https://pinside.com/pinball/market/classifieds/ad/119066

#10213 8 months ago
Quoted from freddy:

You bent me black and white!!! Lol
Thanks Tim
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Hi... Do you have a link to purchase the Black & White ones?

#10214 8 months ago
Quoted from Jnyvio:

Hi... Do you have a link to purchase the Black & White ones?

Yes reach out to bent my wookie
https://pinside.com/pinball/biz/directory/1861-youbentmywookie
Tell him freddy sent ya!

#10215 8 months ago

Anyone have an issue with tons of airballs off the front of the herman target? Tried turning down flipper power but it still seems like every time I hit it head on it shoots up in the air.

#10216 8 months ago
Quoted from freddy:

Yes reach out to bent my wookie
https://pinside.com/pinball/biz/directory/1861-youbentmywookie
Tell him freddy sent ya!

Thanks! Message sent..

#10217 8 months ago
Quoted from Sunsfan23:

Anyone have an issue with tons of airballs off the front of the herman target? Tried turning down flipper power but it still seems like every time I hit it head on it shoots up in the air.

(i dont have the pin) should be an anti-airball plastic there
not sure its from factory or STERN add-on...

#10218 8 months ago
Quoted from Sunsfan23:

Anyone have an issue with tons of airballs off the front of the herman target? Tried turning down flipper power but it still seems like every time I hit it head on it shoots up in the air.

there is this plastic, but i don't have the issues. But maybe it helps:
https://www.pinballlife.com/munsters-easy-install-air-ball-killer-plastic-protector-for-herman-bash-toy.html

#10219 8 months ago

Awesome I ordered it.
I actually loosened the screws on the lower playfield because it was too recessed and I think launching the balls. Since I made the adjustment no real issues.

#10220 8 months ago

Game Exchange of Colorado has Munsters premium listed back on their site for ordering. I don't know if some people got tired of waiting and canceled their pre-order and bought a Godzilla, but this might be your chance if you want one.

#10221 8 months ago

I have that installed in my munsters pin and it works great.. Highly recommended.

#10222 8 months ago

This pin is definitely underrated.

#10223 8 months ago

It is definitely underrated love my premium just got through with a crap load of mods put grandpa mod n spots light in ramp now for pin stadium lights going to be sweet

#10224 8 months ago
Quoted from Sunsfan23:

Anyone have an issue with tons of airballs off the front of the herman target? Tried turning down flipper power but it still seems like every time I hit it head on it shoots up in the air.

I had to remove the mini playfield glass (Plastic) when I put it back on I had repeated airballs when shooting at Herman for no apparent reason. I readjusted the mini playfield glass making sure it was perfectly level with the upper playfield and the problem was resolved. Its amazing that even a tiny lip will launch that ball.

#10225 8 months ago

Does anyone have a super band purple kit on their Munsters? Looking for pics on how it looks.

#10226 8 months ago
Quoted from northvibe:

Does anyone have a super band purple kit on their Munsters? Looking for pics on how it looks.

I have all purple rubbers on my pro but I think the are Perfect Play from Pinball Life.i think they look great if you want a pic of mine I can get a couple.

#10227 8 months ago

I do but I also have black bats, a trough light and green protectors.

7A24849F-4DF3-4DF0-812F-896021F04AD5 (resized).jpeg
#10228 8 months ago
Quoted from MachineGunGuy:

I had to remove the mini playfield glass (Plastic) when I put it back on I had repeated airballs when shooting at Herman for no apparent reason. I readjusted the mini playfield glass making sure it was perfectly level with the upper playfield and the problem was resolved. Its amazing that even a tiny lip will launch that ball.

Yeah dude I had the same exact experience, it’s amazing what a couple millimeter difference will do.

#10229 8 months ago
Quoted from Puffdanny:

I have all purple rubbers on my pro but I think the are Perfect Play from Pinball Life.i think they look great if you want a pic of mine I can get a couple.

Ya! I just wanna see what all purple is like

#10230 8 months ago
Quoted from northvibe:

Ya! I just wanna see what all purple is like

595dfc1ad1642b7d27a7525f1779cb8818f5a74f (resized).jpg
#10231 8 months ago
Quoted from Lopa:

I do but I also have black bats, a trough light and green protectors.
[quoted image]

Thanks! Looks good! The route games are just EATING rubbers on the flippers and randomly a ring will break. Trying to just switch over to silicon I think. I'll start with flippers and see if the owner will spring for the big full kits when I shop the games.

#10232 8 months ago
Quoted from northvibe:

Thanks! Looks good! The route games are just EATING rubbers on the flippers and randomly a ring will break. Trying to just switch over to silicon I think. I'll start with flippers and see if the owner will spring for the big full kits when I shop the games.

There's really not many rubbers on a Munsters so the big full kit isn't very big

#10233 8 months ago
Quoted from Puffdanny:

There's really not many rubbers on a Munsters so the big full kit isn't very big

I think you're right. But when you have to work in a dark bar, doing a full "shop" job sucks. So I'll save the full kits for when I can work with the owner and yank the game out quick. However with fewer rubbers it should be an "easy" install Thanks for the heads up!

The vuk switch did break though. the leg broke off INSIDE the switch, so I couldn't even Operator hack it to work :/ ordered a few so I have some on hand. And got the flipper rubbers as batman and JP stock flipper rubbers were literally mostly split but barely holding on.

#10234 8 months ago
Quoted from Sunsfan23:

. . . it’s amazing what a couple millimeter difference will do.

That’s what I keep telling my wife . . .

#10235 8 months ago
Quoted from northvibe:

I think you're right. But when you have to work in a dark bar, doing a full "shop" job sucks. So I'll save the full kits for when I can work with the owner and yank the game out quick. However with fewer rubbers it should be an "easy" install Thanks for the heads up!
The vuk switch did break though. the leg broke off INSIDE the switch, so I couldn't even Operator hack it to work :/ ordered a few so I have some on hand. And got the flipper rubbers as batman and JP stock flipper rubbers were literally mostly split but barely holding on.

the breaking leg of the vuk-switch happened to my machine very often. If you put some hot-glue on the leg it will not break of again as fast.
you could prepare the switch in advance and then switch it in the machine.

#10236 8 months ago
Quoted from cabal:

the breaking leg of the vuk-switch happened to my machine very often. If you put some hot-glue on the leg it will not break of again as fast.
you could prepare the switch in advance and then switch it in the machine.

ughhhh annoying. good tip. I'll hot glue all the switches I see and this new one when I get it to swap. Thank you! Also having a few on hand is good!

#10237 8 months ago
Quoted from northvibe:

ughhhh annoying. good tip. I'll hot glue all the switches I see and this new one when I get it to swap. Thank you! Also having a few on hand is good!

naahh you only have to treat vuk-switch. All others i never had problems and never have seen in the forum there is.

see post:
https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/166#post-5633827

#10238 8 months ago
Quoted from cabal:

naahh you only have to treat vuk-switch. All others i never had problems and never have seen in the forum there is.
see post:
https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/166#post-5633827

ah ok! Good I'll just glue this one then. I assume that is why they used heatshrink on the wires as well.

#10239 8 months ago
Quoted from mkk629:

That’s what I keep telling my wife . . .

LMAO!

#10240 8 months ago
Quoted from cabal:

naahh you only have to treat vuk-switch. All others i never had problems and never have seen in the forum there is.
see post:

https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/166#post-5633827

Or you can tie wrap the wires together so that they cannot be swinging around and bending the metal tabs back and forth. It is just like continuously bending a paper clip back and forth. Eventually it will break. Same with these switch tabs.

fc316924640af6b94f0da3e55591990eb4b76e9c (resized).jpg

#10241 8 months ago
Quoted from northvibe:

I think you're right. But when you have to work in a dark bar, doing a full "shop" job sucks. So I'll save the full kits for when I can work with the owner and yank the game out quick. However with fewer rubbers it should be an "easy" install Thanks for the heads up!
The vuk switch did break though. the leg broke off INSIDE the switch, so I couldn't even Operator hack it to work :/ ordered a few so I have some on hand. And got the flipper rubbers as batman and JP stock flipper rubbers were literally mostly split but barely holding on.

Might want to look into the 3D printed rail protector mentioned not long ago in this thread. Keeps the long rail to the left of Herm from bending. Plus I zip-tied the opto wires next to the rail too, the opto's a common failure. I understand this is routed, might save you a trip back tho.

#10242 8 months ago
Quoted from mbwalker:

Might want to look into the 3D printed rail protector mentioned not long ago in this thread. Keeps the long rail to the left of Herm from bending. Plus I zip-tied the opto wires next to the rail too, the opto's a common failure. I understand this is routed, might save you a trip back tho.

Was that even after the stern kit for the opto failure on the left ramp, and Herman protector?

Edit: here is the 3d printed post for reference
https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/204#post-6461771

#10243 8 months ago
Quoted from northvibe:

Was that even after the stern kit for the opto failure on the left ramp, and Herman protector?
Edit: here is the 3d printed post for reference
https://pinside.com/pinball/forum/topic/1313-mockingbird-lane-munsters-club/page/204#post-6461771

There's a rail support posted on Thingiverse, I've a printed a few for Munsters owners. Opto cover too, but I haven't used the cover myself. If you get around to swapping the rubbers, might be a good time to put in a rail support.
pasted_image (resized).png

https://www.thingiverse.com/thing:4276887

#10244 8 months ago

Hi , i'm considering buying a Munsters premium, but really don't like how long some of the animations go for and slow down , breakup the gameplay too much in my opinion. Is there an setting or option or hack to change /fix this ?
Thanks.

#10245 8 months ago
Quoted from Shinemyballz:

Hi , i'm considering buying a Munsters premium, but really don't like how long some of the animations go for and slow down , breakup the gameplay too much in my opinion. Is there an setting or option or hack to change /fix this ?
Thanks.

have you tried skipping animations with pressing left and right flipper button at the same time?

#10246 8 months ago
Quoted from cabal:

have you tried skipping animations with pressing left and right flipper button at the same time?

Now that's a great tip!

#10247 8 months ago

Joining the club soon … did a search for the latest code and couldn’t find a direct answer but lots of complaints . Anyway , what’s the latest for the Pro available ?

#10248 8 months ago
Quoted from HC2016:

Joining the club soon … did a search for the latest code and couldn’t find a direct answer but lots of complaints . Anyway , what’s the latest for the Pro available ?

latest code is 1.03

#10249 8 months ago
Quoted from cabal:

latest code is 1.03

Thanks

#10250 7 months ago

Got a b/w premium inbound soon; looking for Mezel Mods sewer ring if someone has one available? Currently out of stock fromMezel. Also, for any b/w owners that have plastic protectors installed...did you go with clear protectors or green? First thought clear made the most sense, then wondered what the green would look like on a b/w.

Promoted items from the Pinside Marketplace
$ 24.95
Cabinet - Shooter Rods
The MOD Couple
7,500
Machine - For Sale
Bakersfield, CA
From: $ 55.00
Gameroom - Decorations
Pinball Photos LLC
$ 15.00
Cabinet - Sound/Speakers
PinWoofer
$ 145.00
Playfield - Toys/Add-ons
The MOD Couple
From: $ 1.25
Playfield - Other
Rocket City Pinball
There are 11,233 posts in this topic. You are on page 205 of 225.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, become a Pinside+ member!