(Topic ID: 249997)

110 volt Shadow plugged into 220 volt outlet

By mikeflan

1 year ago

Topic Stats

  • 9 posts
  • 7 Pinsiders participating
  • Latest reply 1 year ago by Mbecker
  • Topic is favorited by 1 Pinsider


Linked Games

No games have been linked to this topic.

    Topic Gallery

    There have been 2 images uploaded to this topic. (View topic image gallery).

    south-america-outlets-and-adapters-1637155south-america-outlets-and-adapters-1637155_final-5be0a957c9e77c005176ef38 (resized).png
    Brazilian outlets (resized).jpg

    #1 1 year ago

    Title says it all. Buddy in Brazil has a shadow and an 11 year old plugged it into a 220 outlet. Game will no longer come on. Any ideas how much damage this might of caused or what to look for to get it up and running? Thanks

    #2 1 year ago

    OMG that can't be good. Likely killed at least the transformer and maybe more unless by some stroke of like the main fuse blew before doing any major damage.

    I could see that as a $1000+ mistake if it took out the transformer & some boards.

    #3 1 year ago

    You maybe lucky in that the varisitor inside the power box shorted and blew the games main fuse. I would check this first.

    #4 1 year ago

    There is a possibility that there's not as much damage as you fear. As the above post suggests, if the game is protected by a MOV or a more complex TVSS circuit(transient voltage surge suppressor) that might have intercepted the overvoltage before it reached the transformer primary (though those devices are mainly intended to guard against HV spikes from the powerline, and may actually be within normal operating parameters at 220v). Your first move should be to ensure that the transformer primary is receiving line voltage, and if it is not present then this may be the only fix needed.

    Otherwise, the power supply is almost certainly borked, but the transformer may be OK (insulation is usually rated >=1kV in a typical step-down transformer's windings, so it likely did not develop any adjacent-turn shorting), and there is a reasonably good chance that the PS failed in a way that prevented any damaging overvoltage spikes from reaching the logic or driver circuits. Unfortunately, it is unlikely that any fuses saved the day as they are designed to blow with overcurrent conditions rather than overvoltage (and are typically rated at 250v), but they should be checked anyway.

    Start by measuring voltages at the output of the power supplies. If they measure normally (unlikely), the downstream logic and/or driver boards may have sustained damage. If any are dead or out of spec, measure the PS input voltages (transformer secondaries) and if they are within normal limits then you have isolated the problem to the power supply board, and replacement or repair may fix the game.

    #5 1 year ago

    I hate hearing thigs like this

    I'm not optimistic that the damage will be low, but the transformer is likely going to be fine as the 8 amp main power fuse will have protected it, my guess is it blew as the primary would have seen essentially double the normal current draw. ( I=V/R ).

    if he can test individual boards he should pull the MPU and see if it boots, if it does than he's probably in good shape. If he cant bench test this, he can always replace the main fuse turn it on and see what happens.

    Once repaired he should change it to operate on 220V...this is actually really easy to do.

    #6 1 year ago
    Quoted from pinballplusMN:

    You maybe lucky in that the varisitor inside the power box shorted and blew the games main fuse. I would check this first.

    Maybe, I wouldn't count on it though as the same part is used in all machines, it's brakeover voltage is 275V.

    #7 1 year ago

    Im confused how this could happen — thought 220v sockets would be impossible to plug 110 plugs into? Are they different in Brazil than in Europe? Been a while but could have sworn the 220s in Europe are round prong?

    #8 1 year ago

    Wow, I didn't know about the Brazilian outlets..........
    Brazilian outlets (resized).jpg
    south-america-outlets-and-adapters-1637155south-america-outlets-and-adapters-1637155_final-5be0a957c9e77c005176ef38 (resized).png

    #9 1 year ago

    Oh wow that’s crazy!

    Promoted items from the Pinside Marketplace
    $ 26.00
    Playfield - Other
    Pin Monk
    $ 159.00
    Playfield - Toys/Add-ons
    Sparky Pinball
    $ 139.00
    Playfield - Toys/Add-ons
    Sparky Pinball
    $ 24.75
    Playfield - Toys/Add-ons
    The MOD Couple
    $ 40.00
    Gameroom - Decorations
    From: $ 5.00
    Playfield - Toys/Add-ons
    UpKick Pinball
    $ 81.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 9.00
    Cabinet Parts
    Third Coast Pinball
    $ 15.00
    Playfield - Other
    $ 209.99
    Lighting - Led
    $ 65.00
    Pinball Haus
    $ 12.00
    Yorktown Arcade Supply
    $ 839.00
    Flipper Parts
    $ 19.95
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    $ 69.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    $ 99.99
    Lighting - Other
    Lighted Pinball Mods
    From: $ 65.00
    Playfield - Toys/Add-ons
    $ 91.00
    $ 10.00
    Granby Games
    $ 15.00
    Playfield - Decals
    $ 10.95
    $ 20.00
    Playfield - Decals
    Pinball Haus
    $ 7.00
    Playfield - Toys/Add-ons
    Pinball Z
    From: $ 220.00
    Playfield - Toys/Add-ons
    CzTV Mods
    $ 95.00
    Playfield - Toys/Add-ons
    $ 29.95
    $ 28.00
    Playfield - Decals
    Pinball Mod Co.
    $ 27.99
    Matt's Basement Arcade
    $ 20.00
    Playfield - Toys/Add-ons

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside