Just got my spots today.

F63C95EC-D50B-4B68-ACB3-844F43279798 (resized).jpeg

Only installed one of four so far so I can dial in the right color (too yellow out of the box for me).

Edit : not sure if I should leave out the factory post spotty. Makes it look so open now!

5C2BFC4B-EBFA-40AB-B06B-0F743E6EC5FD (resized).jpeg

All 4 with no post spots

A42A4996-973D-40FA-9A0C-0D3AF112A5B0 (resized).jpeg

77244CED-00E1-4CCA-88FF-A6537AEFB49F (resized).jpeg

Edit2: playing with the led color.

Not sure about the warmer color on the left but thought I’d try it anyway. Makes it a little green

0A16CAAF-2646-4C53-821F-E098FA378A93 (resized).jpeg

Nah it’s ok. Nothing to do with the sling spots really just I’d seen some other tron owners put in yellow leds so was interested to see what it would look like.

As those are square you might be able to pass them diagonally through the hole before they are screwed into the switch.

How wide are they corner to corner?

Would there be any difference between what you’d be making for the data east ones vs Wms/Bally?

Had my first sling spot die

I did atleast have a couple of spares to replace it with.

I found that with how they are attached the screws can grind thorough some of the circuit board and can lead to shorting.
I've had to put some small bits of plastic insulator to stop it from occurring.

That would be a negative (unless you can get ahold of mike via another method).

He posted a while back that he was focused on work projects but then has some time for pinball stuff but havnt heard anything yet.