Targeted GI reinforcement. Extra punch where you need it. None where you don't.
A new range of light boards for specific GI boosting.
Slingshot mounted models..
Need more visibility at the business end of your machine? Want to remove post mounted spotlights from above your plastics?
Attach directly to slingshot switch bases and blast your lower playfield where it counts..The bit where you need to see the ball.
LEDs sit below the plastics, either side of each sling switch and above and below the slingshot rubber.
For many Bally/WMS and Data East machines that only have a half inch playfield hole for the sling switches. The narrower form factor can be manoeuvred into place through the small opening.
Or positioned anywhere you want..
Surgical placement of GI reinforcement, right where you need it, and only where you need it.
A three-LED tower that can go almost anywhere and face any direction. Kill your shadows, not your eyeballs.
Built to last..
Not your average Chinese LED. These are top shelf CREE LEDs that can put through up to 50mA per colour channel.
AC/DC powered, polarity agnostic. Just plug the damned things into something and get going.
Schottky diode equipped bridge rectifiers get you all the voltage, all the time.
Coupled with a monster 2200uF aluminium capacitor so peak AC voltage equals your constant DC voltage. 6 plus volts of DC goodness pumping through every light source every second of play.
Colour temp adjustment
You like it warm? Just turn the knob. Match your boost units to your current GI bulb preference in seconds. From ice cold through sunlight and into mellow yellow..no need for your reinforcement to look out of character.
I swore I would never do it, but you don’t seem to care, so for the first time ever on a redshiftLED product...drum roll...
Alligator clips!!! Yes, don’t worry about sparks or shorts or electrocuting yourself, just clip on to the nearest exposed bit of wire and see what happens! I’ve built so much capacity into these things that you could plug them into Three Mile Island and still win. Try to blow them up. I dare you.
These lights are built for one single purpose. To increase the amount of illumination on the ball so you can see IT. They shine SIDEWAYS. AT the ball. Not through the plastics, not onto your artwork, not onto your ramps and not into your eyes. Don’t expect to be able to see your machine from space, just expect to be able to see the ball from your head.
Available next week at ...redshiftLED
...redshiftLED...shipping product within 24 hours of receiving your money since 2015.