Quoted from Medisinyl:Paid orders from batch two will ship later this week--I've prepped double the amount of pipes, so pipe-only orders for batch 3 will be ready to ship upon ordering as well.
Quoted from Medisinyl:Paid orders from batch two will ship later this week--I've prepped double the amount of pipes, so pipe-only orders for batch 3 will be ready to ship upon ordering as well.
Quoted from Yobits:Please do DM me anytime for payment, i am quite happy to pay now, even though i don't need until December.
I'll be messaging in the order interest was posted in the thread. No need for payment until your mods are closer to being shipped.
Only exceptions have been for those that were already on other mods to combine with their order (and those that PMd before I started the thread).
As noted, there were many that dropped out while compiling batch 2, and I expect that will continue as I go down the list.
Quoted from Medisinyl:I'll be messaging in the order interest was posted in the thread. No need for payment until your mods are closer to being shipped.
Only exceptions have been for those that were already on other mods to combine with their order (and those that PMd before I started the thread).
As noted, there were many that dropped out while compiling batch 2, and I expect that will continue as I go down the list.
ok understood, thanks for the update.
Quoted from Medisinyl:I'll be messaging in the order interest was posted in the thread. No need for payment until your mods are closer to being shipped.
Only exceptions have been for those that were already on other mods to combine with their order (and those that PMd before I started the thread).
As noted, there were many that dropped out while compiling batch 2, and I expect that will continue as I go down the list.
hi, sorry please cancel my bezel request, as i have seen pinmonks and will go with that as no visible screws
i do still want the pipe with pink ooze though 100%
Quoted from Yobits:hi, sorry please cancel my bezel request, as i have seen pinmonks and will go with that as no visible screws
i do still want the pipe with pink ooze though 100%
No physical list is made until I send out messages. Pieces desired are determined at that time, so need to specify here.
PinMonk does indeed offer a neat alternative bezel option.
Hello.. if still adding people to the list please add me for the green ooze pipe mod and turtle bezel. Thanks!
Realized the turtle bezel doesn't work on the pro.. ill order the other you mentioned.. however still in for the pipe mod with green ooze. Please let me know when you have one available. Thank u. Great work!
Quoted from Useilloosion:Hey all...
Great work Medisinyl
Put me down for a Pipe mod Green Ooze Plz ✅
Thanks
Any update on #163 request fir Green ooze pipe please
Just shipped out all of the paid domestic orders.
USPS (for the 2nd time since last week) told me their international system is down, but I'll get those out tomorrow.
Tracking should be out to everyone within the next couple hours.
I'll start messaging those further on the list within the next few days for the extra eleven pipes I have on hand (currently without ooze) and two extra buildings.
Quoted from Useilloosion:Any update on #163 request fir Green ooze pipe please
Post #243 showed that I got up to post #65 thus far, but as noted a few times, I have an extra 11 pipes ready on top, so I'll be a chunk further (undoubtedly some will have sold their game or dropped out).
Quoted from Medisinyl:Just shipped out all of the paid domestic orders.USPS (for the 2nd time since last week) told metheir international system is down, but I'll get those out tomorrow.
Tracking should be out to everyone within the next couple hours.
I'll start messaging those further on the list within the next few days for the extra eleven pipes I have on hand (currently within o
Thanks for the updates... Appreciate you are very busy given the quality of your work
put me down for the pipe mod, (pink ooze) and the burning building with the pizza for my pro please. these mods are awesome!
Adrien
Quoted from Useilloosion:Hey all...
Great work Medisinyl
Put me down for a Pipe mod Green Ooze Plz ✅
Thanks
#163 .. order request is getting closer
Quoted from enzopasciuti:could I order them from Italy?
I'm willing to ship anywhere. For those concerned with international fees, I always declare a low value, and will note mods as "plastic toy set," so hopefully there won't be any issues.
Quoted from Medisinyl:Currently up to post #96. If anyone before that point was missed, please let me know.
Sweet I'm post 99 Cant wait!
Quoted from MANTO1975:Awesome mods once again Greg, finally unboxed machine and installed these over the weekend. [quoted image]
Thank you for the photo and positive feedback
------------
Should have a lot more TMNT mods completed this week and will get further down the list soon.
Is this pretty much done? It seems like a long wait and I was getting pretty close to my order. No worries if your not making the mods any more I was just curious
Quoted from Happy81724:Is this pretty much done? It seems like a long wait and I was getting pretty close to my order. No worries if your not making the mods any more I was just curious
Indeed, I got slammed with RZ and ACNC orders (mostly full sets that take a very long time each set) when the shop reopened in Nov. (pre-set date that turned out to be too soon), and as those take money up front and I lose 8% on each refund there, I've been having to prioritize those amongst the Elvira runs (unfortunately the Pinside shop shows the mods as "in stock" rather than made to order, so many customers there get upset with the turnaround times).
So while a TMNT batch went out last week, the TMNT mods have been on hold a bit.
I did close the Pinside shop again, and may not open it again (likely discontinuing many of those mods before a final run call on some).
Will be back on these soon (actually working on 4 more buildings this very moment).
Quoted from Medisinyl:Indeed, I got slammed with RZ and ACNC orders (mostly full sets that take a very long time each set) when the shop reopened in Nov. (pre-set date that turned out to be too soon), and as those take money up front and I lose 8% on each refund there, I've been having to prioritize those amongst the Elvira runs (unfortunately the Pinside shop shows the mods as "in stock" rather than made to order, so many customers there get upset with the turnaround times).
So while a TMNT batch went out last week, the TMNT mods have been on hold a bit.
I did close the Pinside shop again, and may not open it again (likely discontinuing many of those mods before a final run call on some).
Will be back on these soon (actually working on 4 more buildings this very moment).
Ok, sounds good, I just didn’t want to order something else if you’re still planning on making them
Quoted from Jkaping:Hey medisianyl, I sent you a PM but I’m very interested in your TMNT mods. Let me know if I can still get in on any of them.
While it will be a fair while to get to the back end of this list, I'll be focusing on non-Elvira mods for a few weeks after run #17 ships (very soon).
Everyone that currently has interest posted for TMNT mods here will be able to get any mod they want once the time comes.
I'm going to note your post at #281 as the last one that I will accept orders for the building or bezel mods (after that time, they will be permanently discontinued). The pipe will likely be available for a couple years.
I hope you can make some more of the pipe mods... I totally missed the boat on this and I'm sooo tired of the ball flying off there... Thank you!!!
Thanks,
Jeff
I would like to purchase the building mod, if anyone drops their order. I noticed you cut it off yesterday but I wanted to show interest if one became available.
Would also like the pipe mod
Thank you
Will be continuing down the list and sending out messages later this week. Some pipe mods are already complete and will be ready to ship. Couple buildings and several bezels are ready as well.
Hey please put me down for a pipe mod with pink slime!
Hit me up when you can.
Thanks so much and great work!
Will continue down the list later today.
Trying to get a successful run of pink slime going (plenty of green ready to go, but the pink I had on hand sold out).
I had all 4 of my main printers fail over the last few weeks due to adhesion issues while unmonitored (leading to the mess seen below).
Seems the brand I had been using has changed something and doesn't adhere properly, or is very brittle and breaks mid-print (seeing similar complaints showing up recently about that brand).
The PLA I was using before for pink also came in unusable, and I just received another brand to try that is printing now.
I received all the new print heads Thursday as well and have been learning new adjustments to the machines.
Two repairs down, two to go...
Quoted from Medisinyl:Will continue down the list later today.
Trying to get a successful run of pink slime going (plenty of green ready to go, but the pink I had on hand sold out).
I had all 4 of my main printers fail over the last few weeks due to adhesion issues while unmonitored (leading to the mess seen below).
Seems the brand I had been using has changed something and doesn't adhere properly, or is very brittle and breaks mid-print (seeing similar complaints showing up recently about that brand).
The PLA I was using before for pink also came in unusable, and I just received another brand to try that is printing now.
I received all the new print heads Thursday as well and have been learning new adjustments to the machines.
Two repairs down, two to go...
[quoted image]
The new pink slime run was a success, and messages will be going out within the hour (EDIT: messages have been sent up to post #135, and I'll send more out tomorrow).
I'll send about 10 messages at a time and continue down the list once I confirm who is still in for each message batch (I know many will back out or have sold their game by now).
There's about 30 pipe mods ready to ship (just need slime attached once I know the orders), with some buildings and bezels ready to go as well.
Killer stuff Medisinyl! If you ever get this far, put me down for the pipe in green or pink as it is easiest and/or available. Thanks!
Is it too late to change from green ooze to pink. I noticed I have a LOT of green on my playfield and my canister is pink. Thanks!
Quoted from smokinhos:Is it too late to change from green ooze to pink. I noticed I have a LOT of green on my playfield and my canister is pink. Thanks!
No need to decide what you want (mods or options) until I message (first post # locks in your spot for anything available).
#163 .. order request is getting closer
Quoted from Medisinyl:Currently up to post #154. If I missed anyone before that, let me know
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/-medisinyl-mods-tmnt-mod-development-thread-/page/6?hl=hopbeard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.