The MM topper arrived last week! Put it
On my MM. As the topper will stay with the game I drilled through the top.
Took out the 4 bolts from the brackets allowing the topper to sit flush and screwed it in at the front.
The topper ties into the Flashers for the Moat & lower side castle. It uses a board for LED Lights that you can change the pattern of the
LEDs in topper.
The power- it is connected to 12v regulated at TP100 and ground at TP107 using croc clips..
Would prefer to get a connector for the power and run it from somewhere else.. could anyone share where they have taken power from on the driver board
96BE2272-EA81-4B3A-8995-25E4F1240F74 (resized).jpegB83112AB-57E0-4F28-B4F6-66EA6719A308 (resized).jpeg