I think that maybe the mod would "work" better as a single 3D piece coming off of the back of the head and the remainder being the decal on the ramp
I think that maybe the mod would "work" better as a single 3D piece coming off of the back of the head and the remainder being the decal on the ramp
I just installed mine, and I think it's cool. I wouldn't have noticed the flat edge if it wasn't mentioned, and it is certainly nicer to look at than the stock plastic cover on that ramp. It doesn't stand out to me in real life while playing the game, and it adds a cool little tunnel for the ball
Quoted from tktlwyr:^This! The way it is now looks like Snake got run over by a dump truck. He's just missing the tread marks.
Cool mod but I have to agree would have looked better if was longer.
Quoted from MJW:Cool mod but I have to agree would have looked better if was longer.
Without a doubt.
I was speaking with Joe at Pinfest and he is always thinking about improving old stuff and making new stuff. He listens to us and I am sure we will see more of the snake mod.
Than you all for the feedback..
As Burningman stated.. I do listen.. And I will make changes.
In hindsight..I probably could have just left the mod the way it was... but being me.. i have to always take it to the next level.
It's all good and I think you guys are right now looking back at it.
Brock and I are working on it. For those of you who already bought it..we will send you an updated version no charge.
Best!
—JoeRaptor
Quoted from joeraptor2003:Than you all for the feedback..
As Burningman stated.. I do listen.. And I will make changes.
In hindsight..I probably could have just left the mod the way it was... but being me.. i have to always take it to the next level.
It's all good and I think you guys are right now looking back at it.
Brock and I are working on it. For those of you who already bought it..we will send you an updated version no charge.
Best!
—JoeRaptor
Awesome as I just bought both versions at the Atown show.
Quoted from joeraptor2003:Than you all for the feedback..
As Burningman stated.. I do listen.. And I will make changes.
In hindsight..I probably could have just left the mod the way it was... but being me.. i have to always take it to the next level.
It's all good and I think you guys are right now looking back at it.
Brock and I are working on it. For those of you who already bought it..we will send you an updated version no charge.
Best!
—JoeRaptor
Wow. Talk about responding to feedback. That's awesome. I'll be in for one. Thanks joe.
bought a bunch of blades and art and a set of these from joe in Allentown. great guy. thanks for doing this, really cool!
Frikkin awesome addition to an awesome original.
Cant wait till the updated version of the 3d pieces become available online. Also would like to knowif the tail piece is going to be made. Being in australia id like to get them all at once to save on shipping costs.
Well done to all involved, the decal was insanely good originally, youve just "smashed it, not just hit it, smashed it outta the park"
11 outta ten for me, just like the crank it up dial says. Frikkin 11. ?????
Quoted from IAMWZL:Frikkin awesome addition to an awesome original.
Cant wait till the updated version of the 3d pieces become available online. Also would like to knowif the tail piece is going to be made. Being in australia id like to get them all at once to save on shipping costs.
Well done to all involved, the decal was insanely good originally, youve just "smashed it, not just hit it, smashed it outta the park"
11 outta ten for me, just like the crank it up dial says. Frikkin 11. ?????
I second all that. I'd like one too, when the updated version becomes available.
Quoted from Pinballer73:I second all that. I'd like one too, when the updated version becomes available.
Amen to that. Count me in.
Quoted from Knx873:The potential of this mod is high but would need the tail to be complete.
Tbh I'm not sure where or how we'd attach it
Quoted from pinball_customs:Tbh I'm not sure where or how we'd attach it
The tail piece (think "curved" half U-tunnel tube) could be elevated above the habitrail using modified metal standoffs without interfering with ball momentum, and follow through until the plastic deflector next to the mystery scoop.
Alternatively, you could even replace the entire right habitrail with a tube itself, but this would be a PITA in order to get one designed with the proper curves, and would still slow down the ball badly.
The term, "prototype 3D printer" would work well here with clear polycarbonate medium (expensive).
This would complete this modification properly and give the full snake effect.
Right now, the 3D plastic looks incomplete, but well pattern matched.
Quoted from xTheBlackKnightx:The tail piece (think "curved" half U-tunnel tube) could be elevated above the habitrail using modified metal standoffs without interfering with ball momentum, and follow through until the plastic deflector next to the mystery scoop.
Alternatively, you could even replace the entire right habitrail with a tube itself, but this would be a PITA in order to get one designed with the proper curves, and would still slow down the ball badly.
The term, "prototype 3D printer" would work well here with clear polycarbonate medium (expensive).
This would complete this modification properly and give the full snake effect.
Right now, the 3D plastic looks incomplete, but well pattern matched.
That would be perfect!!
It has been pretty quiet regarding the "3D version" Snake Mod 2.0 since A-town.
https://pinballsupernova.wordpress.com/2016/05/09/mod-install-pingraffix-metallica-snake-mod-2-0/
I would have like to see some information regarding any progress as PinGraffix only made around 25-30 for immediate sale.
It is not listed on their website either, just the "regular version".
I could prototype a "snake tube" off the habitrail to finish the job, but I would need to see the 3D scales to match the pattern.
Yeah xTBKx is spot on.....people were looking for a more finished product of the 3D version and it's been very quiet since A-town. I bought one of these at the show this year.
I like your idea about the "snake tube".....would the ball ride right through it?! Make it green and this would be a cool add on!!
I too would like to know where this project stands. I'd be all over this if we could see it first. Please give us an update!
Hey All
I'm sorry for not getting back to this sooner thread sooner.
Due to some recent life events, i had to side track the project.
The good news is.. I have redesigned the snake mod based upon last feedback, I am hoping to have a real life prototype posted by Tuesday.
Please keep checking back here.
BLACKKINGHT of course feel free to make your own version if you wish.
Ii know its taken a bit..but as always I assure to will be worth the wait.
Best
Joe
Quoted from joeraptor2003:Which AMH graphics are you referring too again Sorry?
Do you mean the ramps?
I remember steve sending you some ramp graphics you were going to make,that was a while ago.also looking for info on the 3D snake plastic
Unfortunately no... but i should have some 3D plastics available for EXPO. At this time I am awaiting the prototype to come in which i was promised weeks ago. Matter of fact Im going to call them now.
Quoted from pinball_customs:Sent 10 sets to Joe for expo -- sold out instantly lol
More coming!
Looks like your printing money.
I had emailed about this through their website a couple weeks ago and no response... I take it they are not still making these?
Hi all
I have 40 of the 3 d sets of these coming next week. I'm sorry for the lack of response it was just so much stuff going on here ..
please forgive me .. hang in there .
Good things come to those who wait
Looks awesome !
Thanks for the great work
Is shipping to Australia possible ?
if so can I order 5 sets please ?
To share with some Aussies and Kiwis who I know would be super keen.
Cheers
Ando
Quoted from joeraptor2003:Hi all
I have 40 of the 3 d sets of these coming next week. I'm sorry for the lack of response it was just so much stuff going on here ..
please forgive me .. hang in there .
Put me down for one please! I already have the original mod+decal so just need the 3D pieces.
Ok..wow! I am getting swamped with emails.. so let's do this.. For those of you who contacted me already I have yours reserved .
For those who want to get on the list..let's do a pre order.
$65.00 plus 4.50 shipping USA paypal [email protected]
This will be the easiest way to keep track and get on the list immediately.
Otherwise I will spending many hours making an excel sheet and i hate excel
Canada please add 9:50 shipping
Australia please add 17.00 shipping.
I currently have 23 left!
Best!
-JR
Ordered, cheers. Does this come with a decal for the ramp or do we need to purchase separately? Or is it not needed?
Quoted from GorillaBiscuits:Ordered, cheers. Does this come with a decal for the ramp or do we need to purchase separately? Or is it not needed?
Thank you.
It comes with the ramp sticker as well.
Quoted from joeraptor2003:Thank you.
It comes with the ramp sticker as well.
And it's sexy as all hell!
Order is in! And now I have 3 mods for a game I don't yet own... gotta get on top of that whole... buying the game thing.
Quoted from joeraptor2003:Ok..wow! I am getting swamped with emails.. so let's do this.. For those of you who contacted me already I have yours reserved .
For those who want to get on the list..let's do a pre order.
$65.00 plus 4.50 shipping USA paypal [email protected]
This will be the easiest way to keep track and get on the list immediately.
Otherwise I will spending many hours making an excel sheet and i hate excel
Canada please add 9:50 shipping
Australia please add 17.00 shipping.
I currently have 23 left!
Best!
-JR
Paypal sent!
Quoted from joeraptor2003:Than you all for the feedback..
As Burningman stated.. I do listen.. And I will make changes.
In hindsight..I probably could have just left the mod the way it was... but being me.. i have to always take it to the next level.
It's all good and I think you guys are right now looking back at it.
Brock and I are working on it. For those of you who already bought it..we will send you an updated version no charge.
Best!
—JoeRaptor
Quoted from yfz450:Awesome as I just bought both versions at the Atown show.
Quoted from joeraptor2003:Ok..wow! I am getting swamped with emails.. so let's do this.. For those of you who contacted me already I have yours reserved .
For those who want to get on the list..let's do a pre order.
$65.00 plus 4.50 shipping USA paypal [email protected]
This will be the easiest way to keep track and get on the list immediately.
Otherwise I will spending many hours making an excel sheet and i hate excel
Canada please add 9:50 shipping
Australia please add 17.00 shipping.
I currently have 23 left!
Best!
-JR
Im confused?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/%E2%80%A2new-mod%E2%80%A2met-snake-ramp-kit-wplastic/page/11 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.