••• New FREDDY KRUGER GameBlades™ by Tilt Graphics •••

(Topic ID: 150646)

••• New FREDDY KRUGER GameBlades™ by Tilt Graphics •••


By Icelandr

3 years ago



Topic Stats

  • 14 posts
  • 6 Pinsiders participating
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

There have been 3 images uploaded to this topic. (View topic image gallery).

FREDDY-RIGHT_(resized).jpg
image_(resized).jpeg
freddy_(resized).png

#1 3 years ago

So... we were asked to come up with GameBlades™ for "Freddy: A Nightmare On Elm Street"... Here is the first look at what we are working on now. Should we continue?

freddy_(resized).png

1 week later
#2 3 years ago

I own a Freddy and am a potential buyer. I like the direction you're going in but I believe that particular picture of Freddy is from the newest remake movie. You should pick a picture of Robert Englund as Freddy.

#4 3 years ago
Quoted from Vegas9:

I love that you are using the sweater. I think that's a good idea. Perhaps consider incorporating the claw marks, perhaps like in this photo?

Thanks for these excellent points on the design. I have actually been rethinking this design. I love the idea of the clawmarks. The Freddy image is also a license issue, so for a generic design I will be keeping the sweater (which I created from scratch) and I am going to take your direction and add the clawmarks. Maybe we could show some claws similar to our X-Men Gameblades™ show in this image.

image_(resized).jpeg

#5 3 years ago

That particular claw image only has three blades, while Freddy's glove has 4. But yes, to answer your question, that is a good direction to go in. If you do use the sweater, if it's possible to make it look worn, have holes, or partially burnt, that would be a plus. Another concept could be incorporating fire. Or the use of the children's souls.

EDIT: I looked closer, and do see you did make the sweatet look worn.

#6 3 years ago

@Vegas9: you are right about the claws, and I just put these as a sample. I was thinking of having the claws come in from the back and add some cuts on the sweater also. Sounds like we are on the same page with this. Now lets see if I can hash this out this week.

#7 3 years ago

There are some amazing images at this custom Freddy Glove website: http://www.razorgloves.com/

These are not officially licensed. I do not know if you are allowed to use these images, but you should at least be aware of them.

#8 3 years ago

Thanks for the tip @Vegas9. I will take a look at this web site and see if there is anything there I could use.

#9 3 years ago
Quoted from Vegas9:

I own a Freddy and am a potential buyer. I like the direction you're going in but I believe that particular picture of Freddy is from the newest remake movie. You should pick a picture of Robert Englund as Freddy.

I agree!

#10 3 years ago
Quoted from Icelandr:

The Freddy image is also a license issue

So are all your blades actually licenced products?

#11 3 years ago
Quoted from Pinballfantexas:

So are all your blades actually licenced products?

We will have Bally/Williams licensed products yes, but many of our GameBlades™ are generic designs at the moment.

We spend a lot of time creating art for the GameBlades™ to look as close to licensed art as possible without infringing on any copyrights.

2 weeks later
#12 3 years ago

Hey guys... sorry for the long wait, but here it is finally.... The Freddy Gameblade™ from Tilt Graphics.

FREDDY-RIGHT_(resized).jpg

#13 3 years ago
Quoted from Icelandr:

Hey guys... sorry for the long wait, but here it is finally.... The Freddy Gameblade™ from Tilt Graphics.

FREDDY-RIGHT_(resized).jpg

how much of the claw is blocked by the BOILER room?

boiler pipes/ steam and chains are not licensed me thinks?

Promoted items from the Pinside Marketplace
$ 50.00
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
Wanted
Machine - Wanted
Apollo, PA
$ 16.95
Playfield - Toys/Add-ons
ULEKstore
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
From: $ 220.00
Playfield - Toys/Add-ons
CzTV Mods
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
2,750 (Firm)
Machine - For Sale
Jacksonville, IL

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside