Found 1573 posts

Posts mentioning ‘split second’ ordered by in descending order.

• CLB
  10K+ 3 yr

  The Shadow Club Post #7262 in topic

  Posted over 4 years ago by yellowghost – in All clubs (...members only!) ‐ Last reply 10 days ago

  ... triggers, the cpu does the rest. I believe the magnet holds it, lets it go for a split second, then pulses and thats what kicks it up and around. Magnetic balls are not good ...

• MO
  520 3 yr

  Opening Flight 2000 new software up to the community Post #358 in topic

  Posted over 4 years ago by slochar – in All modding! ‐ Last reply 11 months ago

  ... it should! (How?? I didn't touch that part of the code, I thought) Secondly, the second multiball is broken again, somehow - it's supposed to make you do the full 10-1 coundown ... (drop bank twice) for the second multiball, but instead, it makes it really easy! (as in doesn't even reset!) - ... be able to use in there - like "T" and "minus" for the coundown. (T is in split second's rom, and minus is in the speech+ rom which I guess is a calculator). One thing that ...

• TAN
  4 3 yr

  The Diner saga continues Post #1 in topic

  Posted over 4 years ago by ramrod2 – in Tech: Alpha-numeric ‐ Last reply over 4 years ago

  ... for these other issues...I've noticed that when you lock a ball, the g.i. turn off for a split second, but not nearly every time. I think this is supposed to be a normal feature, as well ...

• MO
  1K+ 3 yr

  JJP Pirates of the Caribbean - Sculpted mods by THE ART OF PINBALL **NEW MOD** Post #775 in topic

  Posted over 4 years ago by Palmer – in All modding! ‐ Last reply 137 days ago

  I would be in on one set. If there is another SE owner that wants to split a second set, I'd be down with that too.

• TE
  13 3 yr

  Domino startup sequence Post #3 in topic

  Posted over 4 years ago by rolf_martin_062 – in EM Pinball Tech ‐ Last reply over 4 years ago

  Hi Peruman here http://user.xmission.com/~daina/tips/pub/emTips.html are some Start-Up sequences. You mention "at end the Control-Bank resets - the playfield gets light for a split second" --- watch the Control-Bank when resetting - question: Does the TB-Tilt-Relay (mounted in the Control-Bank) actuate / plunge ? Also watch the R-30Volt-Hold-Relay at start-up - Does it pull-in and stays pulling ? Greetings Rolf

• TE
  13 3 yr

  Domino startup sequence Post #1 in topic

  Posted over 4 years ago by Peruman – in EM Pinball Tech ‐ Last reply over 4 years ago

  ... to zeros, finally the relay bank resets (which makes the playfield GI turn on for a split second). But that is it, the ball does not get kicked out and the playfield GI ...

• CLB
  5K+ 3 yr

  Whirlwind Club... Members Only! Post #3599 in topic

  Posted over 4 years ago by DakotaMike – in All clubs (...members only!) ‐ Last reply 13 days ago

  So it does flash, but only for like a split second when you sweep the drops. You almost have to look out for it especially just to notice it.

• CLB
  15K+ 3 yr

  WOZ Fan Club - members only Post #10618 in topic

  Posted over 4 years ago by d0n – in All clubs (...members only!) ‐ Last reply today

  ... receptacle. Tested on a meter and the fuse it good. I got it to power on for a split second while manipulating the black fuse cap but then nothing. Fuse still tests good. I removed the ...

• CLB
  5K+ 3 yr

  Whirlwind Club... Members Only! Post #3596 in topic

  Posted over 4 years ago by Initiative – in All clubs (...members only!) ‐ Last reply 13 days ago

  when is the 100k flasher next to the billboard drops supposed to light up? I noticed the same. It doesn't light in attract or EOG sequence. I do notice it flash for a split second when you drop all 3 targets though.

• ALL
  1K+ 3 yr

  Looking for Backglass and Translites thread (Buy, sell, trade) Post #419 in topic

  Posted over 4 years ago by Calvintaylor – in All Pinball ‐ Last reply yesterday

  Looking for a stern split second backglass [att=5689998,2018181 caption=""]

• TDM
  2 3 yr

  DE Jurassic Park DMD flickering when coils fire Post #1 in topic

  Posted over 4 years ago by Ikeaboy1 – in Tech: DMD era games ‐ Last reply over 4 years ago

  ... if the vibrations from the coils are causing a connection or fuse holder to loosen for a split second, or if maybe the high voltage going to the coils has something to do with ...

• O/T
  3K+ 3 yr

  Retro Gaming Club Post #2286 in topic

  Posted over 4 years ago by metallik – in Arcade and video games ‐ Last reply 3 days ago

  ... it responds immediately.. then play a game, press a button to move or jump, and notice the split-second of lag before the action occurs due to the emulation.

• MO
  525 3 yr

  Stars 2020 - new code for Stern Stars (1978) Post #238 in topic

  Posted over 4 years ago by DickHamill – in All modding! ‐ Last reply 15 days ago

  ... a chime sequence, it would be remembered and handled after the chimes were finished playing. A second switch hit was lost. For example, when a star is hit, you hear the 1k chime ... ring fives time in just under a second. If the star is hit again during that period, you hear two series of 5 rings ... all be played. Sound is important for pinball--players often use sound queues to make split-second decisions, so this doesn't seem ideal. 2) each new sound effect could clear the ...

• O/T
  71 3 yr

  US Riots - Any Thoughts Post #52 in topic

  Posted over 4 years ago by Pickle – in Generally off-topic ‐ Last reply over 4 years ago

  ... general are easily armed and people get spooked. Panic sets in and you may have a split second decision to use force or become a victim. It’s human error and mistakes will be made ...

• TSS
  33 3 yr

  Firepower - Lots of coils lock on. Post #28 in topic

  Posted over 4 years ago by the4horse – in Tech: Early solid state ‐ Last reply over 4 years ago

  All coils locked on: All special coils locked on: Reinstall coil output connector do the the flippers work in game over mode? All special coils locked on: Reinstall coil output connector do the the flippers work in game over mode? I'm hesitant to plug it back in even for a split second as there are so many coils locking on I'll do more damage to the driver board. Can you tell me what to look for if the flippers are active in game over?

• CLB
  5K+ 3 yr

  Baywatch Club....Members Only! Post #3437 in topic

  Posted over 4 years ago by TopMoose – in All clubs (...members only!) ‐ Last reply yesterday

  ... who was killed off in the pilot was even brought back to life in the second year. So it turns out that the cast featured in the game is specific only ... in Season 4, episode 16, where Carrie-Ann Moss (5 years before The Matrix!) plays a woman with a split personality who kidnaps and nearly drowns Mitch. The worst episode is probably Season 2, Episode 16 ...

• O/T
  4K+ 3 yr

  What Arcade Games do you own? Post #2855 in topic

  Posted over 4 years ago by Lathroum – in Arcade and video games ‐ Last reply 2 days ago

  ... Bee ticket game Two Japanese Pachislo Slot machines (one is Tomb Raider with video modes) Split Second coin op head to head reflex tester Two Spiral Gumball machines one big and one ...

• TDM
  12 3 yr

  DMD cracked after getting too hot Post #9 in topic

  Posted over 4 years ago by Crash – in Tech: DMD era games ‐ Last reply over 4 years ago

  ... when turning a game off, usually there will be a few dots that are really bright for a split second before the DMD goes dark.

• EMA
  2 3 yr

  Bally 1958 Super Bowler (All Star Bowler family) rubber replacement Post #1 in topic

  Posted over 4 years ago by homegameroom – in EM Arcade Games ‐ Last reply over 4 years ago

  ... hits, was replaced by the previous owner with foam; It looked like a pool noodle was split and stapled on. I read somewhere about using a baling belt to replace the rear rubber, so ... balls, but a 3" black trackball works just perfectly for a replacement! The first picture is BEFORE; the second is AFTER. I wonder if there was anything else used at the backs of these things ...

• MO
  520 3 yr

  Opening Flight 2000 new software up to the community Post #310 in topic

  Posted over 4 years ago by slochar – in All modding! ‐ Last reply 11 months ago

  ... five, prepare, mission, stand, by, all, systems, go, first, stage, second, blast, off, player, commence, countdown FREEFALL one, two, three, four, ... ten, thirty, one, two, three, four, five, returns, continue SPLIT SECOND S, L, P, I, T, E, C, O, N, D, go, all, ball, score, great, shot, second, good, 1, 2, 3, 4, 5, 10, shoot, again, high, gate ... /date?, start, extra, time, over, ladies, gentlemen, excellent, perfect, fair, split, fold, hurry, ...

• TGE
  17 3 yr

  Rom Size Question (256k file v 512k chip) Post #15 in topic

  Posted over 4 years ago by LeChuck – in Tech: Generic ‐ Last reply over 4 years ago

  ... that would be ideal (the first half would go from hex offset 0x00000 - 0x3FFFF; the second half from 0x40000 - 0x7FFFF). Most programmers I've used just want you to pick a file that ... part size already. If you search for 'binary splitter' / 'binary split' / etc you should find a bunch of tools that can split a binary image into multiple files at a given offset. Handy to have ... this is just a one-time thing, feel free to shoot the file over and I can split it for you.

• TAN
  17 3 yr

  PinBot trouble shooting Post #8 in topic

  Posted over 4 years ago by rcork – in Tech: Alpha-numeric ‐ Last reply over 4 years ago

  ... it displays "factory setting" on the top 2 displays for just a second. Then flashes 00 on the player one display, just for a split second. And commences to do this endless loop of "1d 01 ...

• TSS
  4 4 yr

  Stern Split Second Flipper Wiring Post #1 in topic

  Posted over 4 years ago by Bay78 – in Tech: Early solid state ‐ Last reply over 4 years ago

  Hello everyone. I've had my Split Second for about 5 years now. It's always played the time I've had it. But just recently I' ... . I can't seem to find any good pictures online and would like to ask for a fellow Split Second owner for some help. Would it be possible to show a couple of good pictures of ...

• RSD
  263 4 yr

  A Quicksilver itch, from scratch Post #214 in topic

  Posted over 4 years ago by cottonm4 – in Restorations documented ‐ Last reply over 4 years ago

  ... are original manuals. Ali is a reprint Big Game thru Freefall are original manuals, as are Split Second and Catacomb. Quicksilver is a reprint. Lightning, Iron Maiden are IPDB. Viper data on IPDB is ...

• HB
  12K+ 4 yr

  The Crazy Mansion by the Pinball Amigos Post #10664 in topic

  Posted over 4 years ago by swinks – in Homebrew pinball ‐ Last reply 11 months ago

  as for things breaking, Good Fridays have never been good for me - with the worst about 8 years ago and the timing belt suddenly snapped and split second later the engine died, result conrods went through the engine and ended up with one stuffed subaru boxer motor - cost $5k AUD for a new motor. The good luck was I got a $4.5k bonus from work the day before Good Friday.

• CLB
  16K+ 4 yr

  Deadpool owners club. Free chimichangas for all. Post #5832 in topic

  Posted over 4 years ago by atrainn – in All clubs (...members only!) ‐ Last reply today

  I contacted Stern since mine is obviously cracked on one side. Pinball Life has the part listed as #535-1417-02 but I can only put it on my wishlist, can't buy it. Yeah I took a second look at mine today and it looks like it's also split at the seam. I emailed Stern as well, so we'll see.

• HGR
  246 4 yr

  Unique and Must Haves for your Game Room Post #62 in topic

  Posted over 4 years ago by TheRudyB – in All gameroom talk ‐ Last reply over 3 years ago

  ... in ketchup and then randomly alternate between sticking a heavily ketchup-laden fry in your mouth a split second before taking another bite of your dog, and very discreetly dragging your dog across your ...

• CLB
  1K+ 4 yr

  Maverick fan thread - We play till we drop, winner takes all! Post #1211 in topic

  Posted over 4 years ago by crujones4life – in All clubs (...members only!) ‐ Last reply 45 days ago

  ... wheel should be turning when the horn goes off even if it is just for a split second. Replaced the entry optos and never had another problem.

• CLB
  2K+ 4 yr

  Flight 2000 Club - members and fans welcome! Post #779 in topic

  Posted over 4 years ago by cottonm4 – in All clubs (...members only!) ‐ Last reply 37 days ago

  ... than a microswitches'. I have thought about that, too. So much, that I even bought the assembly from a Split Second off of Ebay to have in case I figure out how to do it. Mechanically, I think ...

• CLB
  2K+ 4 yr

  Flight 2000 Club - members and fans welcome! Post #776 in topic

  Posted over 4 years ago by cottonm4 – in All clubs (...members only!) ‐ Last reply 37 days ago

  ... these. Stern's production schedule was: Flight 2000 then Nine Ball. After Nine Ball came Freefall, Split Second and Catacomb; these three used a completely different type of multi-ball launcher.

• TDM
  64 4 yr

  Tech Charts available and updates Post #58 in topic

  Posted over 4 years ago by Inkochnito – in Tech: DMD era games ‐ Last reply over 4 years ago

  ... Iron Maiden Lectronamo Lightning Magic Memory Lane Meteor Nine Ball Nugent Orbitor 1 Pinball Quicksilver Seawitch Split Second Star Gazer Stars Stingray Trident Viper (Preliminairy) Wild Fyre You can find all my Tech ...

• ALL
  239 4 yr

  Inkochnito's Pinball score and instruction cards website update Post #148 in topic

  Posted over 4 years ago by Inkochnito – in All Pinball ‐ Last reply 24 days ago

  ... , Dragon Fist, Flight-2000, Freefall, Galaxy, Iron Maiden, Lightning, Meteor, Nine Ball, Orbitor 1, Quicksilver, Seawitch, Split Second, Star Gazer, Viper. All this information has now been put into Tech Charts and added ... 1 Tech Chart added Stern Qiuck Silver Tech Chart added Stern Seawitch Tech Chart added Stern Split Second Tech Chart added Stern Star Gazer Tech Chart added Stern Viper (preliminary) Tech Chart added ...

• RSQ
  12 4 yr

  CPR Reproduction PHARAOH plastics Post #10 in topic

  Posted over 4 years ago by KevinCPR – in Restoration questions ‐ Last reply over 4 years ago

  ... at the time, there were plenty to pick from. I mean, I remember a couple Jousts got damaged (split at the crease) by UPS and we did those... so this would have been no ... up and off the screen, into the past. We noticed repeated emails coming back for second (or third) attempts at an answer were almost worse for him, as it seemed if ... ... or maybe I'm way off here. Who knows. I don't think I am. If zero response, even after a second try, is what is happening - then by all means, run to Pinside to complain. That ...

• TSS
  7 4 yr

  Seeking info on Split Second endless extra ball bug Post #1 in topic

  Posted over 4 years ago by slochar – in Tech: Early solid state ‐ Last reply over 3 years ago

  ... of my ongoing project to disassemble all the classic stern games, I recall that when I owned a Split Second, there was a certain combination of Dips concerning the extra ball code that would just keep ... , however, I don't recall what sequence of dips were set to have the bug happen. Any Split Seconds owners that have experienced the bug can you post what the dip settings were ...

• CLB
  7K+ 4 yr

  Alice Cooper's Nightmare Castle Club: Enter at own risk! Post #4278 in topic

  Posted over 4 years ago by superhawk2300 – in All clubs (...members only!) ‐ Last reply yesterday

  ... that one-ricochets right into the outlane. There are so many spots that just equal split-second death on this table. So frustrating. There. I wish I felt better, but I don't. I need to buy ...

• CLB
  2K+ 4 yr

  Flight 2000 Club - members and fans welcome! Post #733 in topic

  Posted over 4 years ago by vec-tor – in All clubs (...members only!) ‐ Last reply 37 days ago

  I'll be working on Fusion 360 models of the inlane guides this week. I did them once in Sketchup but the conversion to get them to a dxf file did something funky when the CNC cut the stainless. Fusion 360 should solve that issue. I remember an operator back in the early 1980's trying to order the metal ball guides that were used on Stern's Split Second as a repair for Fight 2000. He freaked out over the cost to order the part... told the distributor at that time to shove it.

• LCD
  377 4 yr

  Has anyone installed woz 2.0 yet? I’m about to! Post #328 in topic

  Posted over 4 years ago by LTG – in Tech: LCD era games ‐ Last reply 7 months ago

  ... to be at the BEGINNING of the FIRST paragraph after the 6>. Putting it on the second paragraph is too late for awesome people like me. Fortunately (?) I’ve spent so much ... paragraph of 7>, but some of that information could be moved to the beginning of 7>. The second paragraph of step 7 talks about installing single RGB GI board 15-0051-00. This doesn ... early ECLEs. (The problem is both the JUSB and J800 are the same cable, split into two cables at the header block on the PC motherboard. So the instructions to ...

• TGE
  959 4 yr

  Arduino Pinball Controller Post #296 in topic

  Posted over 4 years ago by RatShack – in Tech: Generic ‐ Last reply 37 days ago

  Progress! Switch matrix driver is working and I'm able to start a game and score points. MPF is losing connectivity after it advances to ball 2. Any ideas? MPF shows my game's splash screen in-between balls for a split second (it shouldn't), I am thinking it's re-initializing comms when this happens. What's also weird is if I restart MPF after I lose comms then it's unable to communicate with the APC until I power cycle it. It's completely out to lunch. [att=5555874,1935940 caption=""]

• MO
  520 4 yr

  Opening Flight 2000 new software up to the community Post #176 in topic

  Posted over 4 years ago by slochar – in All modding! ‐ Last reply 11 months ago

  ... am I adding in the "shoot pinball again" from O1 though, nor "hurry.... hurry.... hurry....." from Split Second.... those sound bytes were 2 of the reasons I even sold those games. Log follows ;eliminate dip ...

• CLB
  11K+ 4 yr

  Total Nuclear Annihilation Club...Welcome to the future! Post #6308 in topic

  Posted over 4 years ago by TheNoTrashCougar – in All clubs (...members only!) ‐ Last reply 3 days ago

  Hey Guys, People do that "Dirty Pool" shot all the time! It gives you the add-a-ball immediately when that happens for a 4x playfield multiplier and 4 balls in play. There is a split second where the drops remain down where you can shoot one back in there. You should always go for it! Thanks for sharing the cool video! --Scott

• TSS
  5 4 yr

  Space Shuttle Display Issues - Help Reuqest Post #4 in topic

  Posted over 4 years ago by statictrance – in Tech: Early solid state ‐ Last reply over 4 years ago

  ... and oriented with the red line to the 1 pin. I confirmed it when plugging in the second master display. Molex connectors are appropriately connected (they won't fit otherwise on the card edge ... thanks to the key pin. @inkochnito 2- question - what tool do you use to remove the split edge connector pin? I didn't see any broken, but if worse comes to worse I would try ...

• RSD
  263 4 yr

  A Quicksilver itch, from scratch Post #164 in topic

  Posted over 4 years ago by Tsskinne – in Restorations documented ‐ Last reply over 4 years ago

  Yeah I scored a few NOS ones last year at TPF. My dragonfist has them, and my split second did as well.

• CLB
  868 4 yr

  Bally 6803 Club - All Welcome Post #208 in topic

  Posted over 4 years ago by Chalkey – in All clubs (...members only!) ‐ Last reply 3 days ago

  ... I have the ball off of the playfield the two ball capture coils each pulse for a split second about every 5 seconds or so, like the game is making sure they are up or ...

• CLB
  811 4 yr

  Official Dungeons and Dragons D&D Club - All Welcome Post #357 in topic

  Posted over 4 years ago by Chalkey – in All clubs (...members only!) ‐ Last reply 17 days ago

  ... I have the ball off of the playfield the two ball capture coils each pulse for a split second about every 5 seconds or so, like the game is making sure they are up or ...

• CLB
  6K+ 4 yr

  Home for the Gottlieb SYS1-SYS80B guys, Yep it's a club :) Post #3463 in topic

  Posted over 4 years ago by Inkochnito – in All clubs (...members only!) ‐ Last reply 4 days ago

  ... anyway to determine from the schematic which data line makes this sound? The sound is split into different channals. The first one is coming from sound generator K4 (AY-3-8913) and ... going via pre-amp H1 (LM324). C7 is a small suspect. The second is coming from DAC at E2 (AD7528J) and going via pre-amp B1 (LM324) and ...

• TAN
  2 4 yr

  Data East Batman problem Post #1 in topic

  Posted over 4 years ago by JanS – in Tech: Alpha-numeric ‐ Last reply over 4 years ago

  ... the original coil as the original diode is reversed as well. Turned back on for a split second and coil sucked on. Q43 on the CPU swap? any other suggestions? Thanks! Forgot to ...

• GPV
  114 4 yr

  PAPAtv LIVE! Post #109 in topic

  Posted over 4 years ago by TOpinhead – in Game play videos ‐ Last reply over 4 years ago

  It's Mardi Gras! So the PAPAtv crew are playing some carnivalesque pinball games: Bally's CIRCUS VOLTAIRE and Stern's SPLIT SECOND! The party starts at 7:30PM Eastern at: www.twitch.tv/papatvpinball[att=5491221,1901941 caption=""][att=5491221,1901942 caption=""]

• TDM
  3 4 yr

  Demolition Man - Claw Magnet acting up at ball release Post #1 in topic

  Posted over 4 years ago by Sk0r – in Tech: DMD era games ‐ Last reply over 2 years ago

  ... sequence ends on the DMD, claw stays still for about 1 second, then moves slightly left and finally drops the ball a split second later (resulting in the ball not dropping in the intended exit ...

• TDM
  24 4 yr

  Small mistake. Big problem. 62V killed my 12V Post #1 in topic

  Posted over 4 years ago by fabsj82 – in Tech: DMD era games ‐ Last reply over 4 years ago

  Hey guys. I just bought a Demolition Man with a non working DMD. While testing voltages on the DMD I looked away for a split second and bridged the 62 volt pin to the 12 volt pin. Optos went out and the game started launching balls continuously. F116 fuse was blown. I turned the game off replaced the fuse and it blew again right away on start up. I pulled the board and BR5 bridge seems to be fine. Where should I be looking next? U20 chip?

• HGR
  3K+ 4 yr

  Super Chexx bubble hockey unofficial thread Post #2246 in topic

  Posted over 4 years ago by kyle315a – in All gameroom talk ‐ Last reply 20 days ago

  Ice says you need the split base for doorways smaller than 32 inches. This is not always the case! It can ... . The first picture is going through a 30 inch doorway, into a 36 inch wide hallway. The second picture is going through a 30 inch doorway (29 inches between door trim), into an open ...

• ALL
  28K+ 4 yr

  What machine did you bring home today? Post your pictures! Post #15023 in topic

  Posted over 4 years ago by fabsj82 – in All Pinball ‐ Last reply yesterday

  Super happy with this trade. High Speed out nice Demolition Man with non working DMD in. On a bad note, while testing voltages at the DMD I looked away for a split second at my kids and bridged the 62 volt pin with the 12 volt pin :wall: New GI bulbs and board parts on order. Now I wait..... :([att=5487915,1899912 caption=""][att=5487915,1899913 caption=""]

• EV
  64 4 yr

  I got into Pinburgh! What should I know? Post #9 in topic

  Posted over 4 years ago by ryanwanger – in Events ‐ Last reply over 4 years ago

  ... ...with a little wiggle room at the edges of those ranges). Each game scores 3-2-1-0 (for first, second, third, and fourth place, respectively). So each round you will earn between 0 and 12 points ... to where you are in the standings. And the end of Day 1, the players are split into five groups: A,B,C,D,E. Day 2 (Friday) is exactly the same, five rounds, except you only play ...

• CLB
  15K+ 4 yr

  Twilight Zone Owner's club Post #8211 in topic

  Posted over 4 years ago by Green-Machine – in All clubs (...members only!) ‐ Last reply today

  ... riders superman time 2000 airbourne avenger 4x4 road runner stern electronics flight 2000 big game split second iron maiden cheetah Orbitor 1 Viper jersey jack pinball the wizard of oz the hobbit Heghway ...

• HB
  62 4 yr

  Trying to revive an old EM (Dealer's Choice) with OPP and MPF Post #8 in topic

  Posted over 4 years ago by openpinballproj – in Homebrew pinball ‐ Last reply over 3 years ago

  ... the playfield itself if there is space to fit it. It can make sense to split it into 2 STM32 (such as all the flippers on one towards the bottom, with two ... incandescent boards to run the active lights at the bottom of the playfield, then a second STM32 towards the top for the ball tray, 2 slingshots and 3 pops + another two incandescent boards ...

• CLB
  15K+ 4 yr

  Stern STAR WARS club...May The Force Be With You Post #8486 in topic

  Posted over 4 years ago by d0n – in All clubs (...members only!) ‐ Last reply yesterday

  ... the playfield seems to activate the shaker and when it does shake, it's maybe for a split second. Is this as good as it gets with the shaker? Is there maybe a code update ...

• ALL
  110 4 yr

  Best Classic Stern Game, for Gameplay Post #22 in topic

  Posted over 4 years ago by terrapinmark – in All Pinball ‐ Last reply 16 months ago

  These are the 4 I currently own. Have owned previously: Stingray, Lightning, Freefall, Catacomb, Meteor, Split Second, Lectranamo, Cheetah, Big Game, Trident, and Seawitch.[att=5465362,1886253 caption=""][att=5465362,1886254 caption=""]

• TSS
  6 4 yr

  Mr Mrs PacMan game sounds go silent when voice should be there Post #6 in topic

  Posted over 4 years ago by vintageclub – in Tech: Early solid state ‐ Last reply over 4 years ago

  ... all the connectors. If your game is resetting then it may be losing 5volts for a split second due to a crappy connection at the rectifier board. Obviously, all the pins are not good ...

• HGR
  23K+ 4 yr

  Let's see pics of game rooms! Post #14678 in topic

  Posted over 4 years ago by jeep-mustang – in All gameroom talk ‐ Last reply today

  ... ) on the other far side of the building is my game room on Just the second floor (24x30 upper floor & 24x18 on the mid level floor with the pins). I built the ... what I was needing for clearance height in the shop originally. Worked out to make a nice split level for the game room. The whole game room thing actually started when I was 26 ... myself and two buds were drinking (too much) i told them I was thinking of making those second floors into a guest room kinda thing, when my buds were like “hell no, you need ...

• EV
  48 4 yr

  Classic Stern Row at the TPF... Post #48 in topic

  Posted over 4 years ago by mrgone – in Events ‐ Last reply over 4 years ago

  Fantastic line up. You all are missing a split second. Another great classic stern.

• OP
  106 4 yr

  How much could you make off operating 1 pin? Post #86 in topic

  Posted over 4 years ago by ryanwanger – in Operating/routing pinball machines ‐ Last reply over 4 years ago

  ... at my best location...but this only lasts a few weeks) per day, per pin, before split. Average for best location is $10/pin/day. Average for a bad location is $3/pin/day ... . I had a single pin in an office, and in less than a month they were already requesting a second machine. So, as stated above, I don't think you can get away with just operating one ...

• MFS
  66 4 yr

  For sale: Catacomb Post #15 in topic

  Posted over 4 years ago by cottonm4 – in Pinball machines for sale ‐ Last reply over 4 years ago

  ... . Don't forget about Viper as well being on the rare list.. along with Split Second. Dragonfist is the lowest unit produced at 302, as you stated. There were ... production numbers for all but two. There are no production numbers for either Catacomb and Split Second. From things that I had read, the "conventional" wisdom was about 2200 Catacombs produced. ... thinking the number is less than 900. I also think there were around 950 Split Seconds produced. We can for or against, but any reasonable guess can be can ...

• MFS
  66 4 yr

  For sale: Catacomb Post #14 in topic

  Posted over 4 years ago by Powdevil – in Pinball machines for sale ‐ Last reply over 4 years ago

  Don't forget about Viper as well being on the rare list.. along with Split Second. I’ve never seen production numbers on Split Second.. Viper at 438 is rare, and Star Gazer is fairly rare at 869.

• MFS
  66 4 yr

  For sale: Catacomb Post #13 in topic

  Posted over 4 years ago by smileymatthew – in Pinball machines for sale ‐ Last reply over 4 years ago

  Don't forget about Viper as well being on the rare list.. along with Split Second.

• TSS
  95 4 yr

  Revised version of Meteor, out of beta test Post #67 in topic

  Posted over 4 years ago by slochar – in Tech: Early solid state ‐ Last reply 22 months ago

  I would have to think about how to implement multiple extra balls. There's some unintended consequences of doing this as you have to be able to handle odd situations and still maintain the shoot again lamp - that's why Split Second has the 'endless' extra ball bug, the add-a-ball isn't handled properly. (And apparently the Lazer Lord prototype has the same thing in reverse, the extra ball doesn't stack at all, and turns off at the next score event after you earn it....)

• TAN
  8 4 yr

  Can someone with a Bad girls help me out with a voltage reading Post #3 in topic

  Posted over 4 years ago by Oldschool77 – in Tech: Alpha-numeric ‐ Last reply over 4 years ago

  ... you will not get the proper voltage going to the displays. No, i get garbage for a split second when i flip the right flipper quickly/hard (See attached pics...on is no flip, one ...

• ALL
  33 4 yr

  Does drinking liquor inspire you to work on your machine ? Post #9 in topic

  Posted over 4 years ago by cdnpinbacon – in All Pinball ‐ Last reply over 4 years ago

  Does the split second delay cause better ball retrieval?

• O/T
  112 4 yr

  Do You Get A Regular Colonoscopy? Post #110 in topic

  Posted over 4 years ago by iamdrunker – in Generally off-topic ‐ Last reply over 4 years ago

  I got one, Can't wait till my next one! They gave me Propofol, The same stuff that killed Michael Jackson. It was great!!!! For a split second.

• ALL
  41 4 yr

  What other vintage game would you like to see STERN redo? Post #41 in topic

  Posted over 4 years ago by yellowghost – in All Pinball ‐ Last reply over 4 years ago

  Split second?

• ALL
  423 4 yr

  Sharing your Whales! Post #131 in topic

  Posted over 4 years ago by vdojaq – in All Pinball ‐ Last reply over 4 years ago

  Spectrum or Split Second

• ALL
  423 4 yr

  Sharing your Whales! Post #89 in topic

  Posted over 4 years ago by Mr68 – in All Pinball ‐ Last reply over 4 years ago

  Hilton, gives some clues so we can have some fun guessing. I went you your Wishlist but that's most likely incomplete and outdated as most on Pinside are. Mephisto? BTW. There is a Time Fantasy and a Split Second for sale in Denver but you most likely already knew that. And Split Second has a ridiculous price on it IMO.

• JJP
  3K+ 4 yr

  jjPirates of the Caribbean Troubleshooting/Tips/Issues jjPotC Tech Post #2464 in topic

  Posted over 4 years ago by EaglePin – in Jersey Jack Pinball ‐ Last reply 11 days ago

  ... the ball immediately bounces back the other way to go through the gate in the split second of time the gate has bounced up.

• CLB
  18K+ 4 yr

  Elvira's House of Horrors - The Owner's Club Post #1545 in topic

  Posted over 4 years ago by turbo2nr – in All clubs (...members only!) ‐ Last reply today

  Elvira LE #98 Second day of owning and having a great time. Looking forward to updates to make use of the shaker-motor. So far never felt it go off except for a split second just Once. ?? It does work for test in service menu. I guess just no code to make use of it? That's so lame!

• MA
  308 4 yr

  Introducing the Pinshakers Universal Plug & Play Shaker Motor Kit Post #218 in topic

  Posted over 4 years ago by Xtraball – in Announcements ‐ Last reply 57 days ago

  When a solenoid triggers it, say a pop bumper, does it shake for just a split second (the pop bumper hit is a split second), as opposed to if it’s set to trigger while the cannon on T2 is turning it would shake longer?

• TAN
  10 4 yr

  Gottlieb Bad Girls Display "garbage" when flipper button pressed... Post #1 in topic

  Posted over 4 years ago by Oldschool77 – in Tech: Alpha-numeric ‐ Last reply over 4 years ago

  ... pop up dimly in addition to the actual score on it. It only happens for a split second right when it’s flipped….to make things more complicated, I’ve narrowed it down to the ...

• MO
  520 4 yr

  Opening Flight 2000 new software up to the community Post #69 in topic

  Posted over 4 years ago by slochar – in All modding! ‐ Last reply 11 months ago

  Wait, the spot blast when lit standup spots the entire word??!?! That's ridiculous. Shows how much I shoot that center target.... it's a drain monster on mine/tight shot. So no reuse of that code that makes it kind of easier as the code will be the same for blast off spotting, instead of 2 separate ones. Who thinks I should swipe the "hurry" speech out of Split second and add it to the quickshot options?? (just kidding, that drove me crazy on that game when I had it).

• TSS
  30 4 yr

  Bally Squawk and Talk Board -- No Sound after OP Error. Post #28 in topic

  Posted over 4 years ago by Quench – in Tech: Early solid state ‐ Last reply over 4 years ago

  ... blow a 50V cap? The 12V rail was connected across the cap in reverse polarity for a split second. How much reverse voltage hit the cap depends on how long you shorted it and ...

• CLB
  16K+ 4 yr

  Deadpool owners club. Free chimichangas for all. Post #4951 in topic

  Posted over 4 years ago by sethi_i – in All clubs (...members only!) ‐ Last reply today

  Auto-launch issue just crept up. Anytime the ball is fed into the shooter lane for an auto-launch, there is a mechanical "whir" sound for a split second, but nothing happens. The short "whir" is repeated until the ball is manually plunged. It started while I was in MechSuit if that matters. The trough switch tests OK. Thought I'd check for ideas before I start digging into the machine?

• PLT
  41 4 yr

  Does hitting the buttons harder help? Post #6 in topic

  Posted over 4 years ago by 85vett – in Playing tips ‐ Last reply over 4 years ago

  Yes, it's just an on and off switch. Difference is in your head. Pushing a button harder wont give it more power as a leaf switch doesn't know the difference between hard and soft. Once the path is closed its closed. The only difference is barely making contact for a split second for a tap pass or fluttering the flipper. That's just turning the coil on and off faster. It's not doing that because you pushed it softer, just because the coil was only engaged for so long.

• DP
  153 4 yr

  The Big Lebowski: Software Bugs and Errors - Post them here! Post #6 in topic

  Posted over 4 years ago by Hoss_Coog – in Dutch Pinball ‐ Last reply 8 months ago

  ... it restarted. When games are over, a loud high pitched sound like a pop happens for about a split second around 80% of the time. Today I fired it up and everything displayed on the monitor ...

• HB
  440 4 yr

  P3 Game: So You Want to Be a Hero? Quest For Glory Pinball Post #23 in topic

  Posted over 4 years ago by bingopodcast – in Homebrew pinball ‐ Last reply 13 months ago

  ... update) you add your methods that handle various items. For example, my attract mode is split into several distinct backgrounds. I could create separate scenes for them (and that's probably the more ... about two hundred dollars. When I have a lot of time to work in a row, I plug into a second monitor and full keyboard and mouse. But with the laptop, I can always work on my ...

• ALL
  26K+ 4 yr

  Post Project Pins for sale here - CL, eBay, Pinside and others Post #15192 in topic

  Posted over 4 years ago by Daditude – in All Pinball ‐ Last reply yesterday

  https://m.facebook.com/marketplace/item/1213426388852470/?ref=browse_tab&search_query=pinball Stern split second (not mine) $1,000 or trade Frisco, Texas Me: You NEVER see this pin cone up for sale.

• CLB
  16K+ 4 yr

  Deadpool owners club. Free chimichangas for all. Post #4818 in topic

  Posted over 4 years ago by punkin – in All clubs (...members only!) ‐ Last reply today

  Had a good game on my Deadpool on the weekend and noticed the left flipper at the end of a long ball was taking a split second too long to drop. POointed it out and others could see it too. Ended up costing me the ball. Anyone know off the top of their head what would cause this to save me the trouble of figuring it out?

• O/T
  89 4 yr

  What’s your favorite scene of a movie or TV show? Post #29 in topic

  Posted over 4 years ago by Rando – in Sights and sounds ‐ Last reply over 4 years ago

  ... at some point someone would barge in with news about their missing daughter, and in a split second all of their waiting might be over, again, without having to be told. Gets me ...

• CLB
  11K+ 4 yr

  Total Nuclear Annihilation Club...Welcome to the future! Post #6081 in topic

  Posted over 4 years ago by NikoEstevan – in All clubs (...members only!) ‐ Last reply 3 days ago

  ... to begin a new Co-Op game the screen with flash (I believe) "Team VS Machine" for a split second before beginning a complete reset. Hope this helps and thanks for the continued support...can't wait ...

• CLB
  6K+ 4 yr

  Home for the Gottlieb SYS1-SYS80B guys, Yep it's a club :) Post #3230 in topic

  Posted over 4 years ago by gdonovan – in All clubs (...members only!) ‐ Last reply 4 days ago

  ... the coil released, it was bound up against the side of the sleeve and takes a split second to release. Grinding off the point of the piece gave me about 1/8" of clearance and ...

• RSD
  52 4 yr

  Black Hole repair log Post #23 in topic

  Posted over 4 years ago by gdonovan – in Restorations documented ‐ Last reply over 2 years ago

  ... the coil released, it was bound up against the side of the sleeve and takes a split second to release. Grinding off the point of the piece gave me about 1/8" of clearance and ...

• TDM
  8 4 yr

  Dirty Harry Double Tap Both Flippers Game Reset Post #6 in topic

  Posted over 4 years ago by Isochronic_Frost – in Tech: DMD era games ‐ Last reply over 4 years ago

  If you have a dmm you could test tp2 for 5v. On the driver board. Yes but it’s hard to measure that split second drop when you’re trying to hit the buttons. Not sure why the downvote @thelaw Maybe I shouldn’t suggest it so certainly but I had the same issue with the 1995 JM and it was intermittent when 3 solenoids were activated it would reset the game. I JUST dealt with it so that’s why I’m so confident. These PS are dying at this point and need to be rebuilt.

• CLB
  1K+ 4 yr

  WHO dunnit Club - And then I was on the case... Post #270 in topic

  Posted over 4 years ago by Pinkitten – in All clubs (...members only!) ‐ Last reply 21 days ago

  ... awards spinning inside each box. Even when the award is decided, it barely flashes for a split second and then is gone. In the video example posted on the color DMD website, it ...

• MO
  233 4 yr

  ColorDMD Game 80 is Ghostbusters! Post #206 in topic

  Posted over 4 years ago by finnflash – in All modding! ‐ Last reply over 4 years ago

  I didnt notice any b/w. Even the last split second of the first storage ball lock is colored. Pink river of slime was added also.

• TDM
  12 4 yr

  Repinning IDC connector to Molex- jumper question Post #12 in topic

  Posted over 4 years ago by arolden – in Tech: DMD era games ‐ Last reply over 4 years ago

  Yes, the circuit is fused at a higher value than a single header pin can carry. These pins are already connected together at the header. I thought that might be the case. Just redid these pins and added a Y split to add the second pin. Ugly join, but it works. I really wish there was a simpler way of doing these pins.

• TAN
  23 4 yr

  Whirlwind sometimes doesn't boot, diagnostic led flashing forever Post #4 in topic

  Posted over 4 years ago by slochar – in Tech: Alpha-numeric ‐ Last reply over 2 years ago

  You know how system 11's boot up and for a split second the led's are solid before they start the flashing? Seems like it might be in a ...

• STN
  1K+ 4 yr

  #Where's the code? Ghostbusters Code Wish List, CODE UPDATE RELEASED! Post #1527 in topic

  Posted over 5 years ago by ArcadeBar – in Stern Pinball ‐ Last reply over 3 years ago

  After you drain and it tally’s up your bonus the last screen shows Total Bonus, then there’s a split second glitch screen, then onto next ball. That glitch screen should be your new Total Score, then go onto the next players ball. Also would be great if instant info showed how many ghosts you have.

• MFS
  111 4 yr

  For sale: Deadly Weapon (Unfortunately for the buyer) Post #10 in topic

  Posted over 5 years ago by SeymorGoldfarbJr – in Pinball machines for sale ‐ Last reply over 4 years ago

  ... , such as rules, flipper design, grounding, etc., but the quality of the parts themselves were second to none in my opinion. The wiring and labeling under the playfield was better than ... underside was screen printed on the bottom of the playfield. I've also never had a cabinet split unlike other manufacturers, although there were some terrible particle board cabinets in the 80s which ...

• TSS
  252 4 yr

  MPU 100 Don't boot on first try Post #46 in topic

  Posted over 5 years ago by Quench – in Tech: Early solid state ‐ Last reply over 4 years ago

  How many times have you burnt you fingers? Heh, sometimes they bite for a split second but it's not that bad. It's not for everyone..

• CLB
  5K+ 4 yr

  Eight Ball Deluxe Owner Club & Restorations Guests Welcome As Well Post #2369 in topic

  Posted over 5 years ago by srose007 – in All clubs (...members only!) ‐ Last reply yesterday

  ... which had been snipped off (Thanks John!). The capacitor apparently allows the CPU to have a split second longer to recognize that the star rollover has been actuated. Apparently this is the culprit ...

• TGE
  959 4 yr

  Arduino Pinball Controller Post #137 in topic

  Posted over 5 years ago by bontango – in Tech: Generic ‐ Last reply 37 days ago

  ... read documentation :wink: A 'quick win' with basic functionality of the board is important, then in a second step 10% or so of the people start to read documentation and will try the ... in the source or via the menu) - integrate LISY onto the board, connected e.g. via I2C - split the APC board into different 'variations', so that the connectors fit with the original With ...

• STN
  1K+ 4 yr

  #Where's the code? Ghostbusters Code Wish List, CODE UPDATE RELEASED! Post #1463 in topic

  Posted over 5 years ago by ArcadeBar – in Stern Pinball ‐ Last reply over 3 years ago

  @Xaqery after your ball drains and the Total Bonus is displayed there’s a split second glitch screen then it goes to the next ball, I’ve looked close enough to make ...

• ALL
  4K+ 4 yr

  Pinball in movies or TV shows? Name a game you have seen in the background? Post #1667 in topic

  Posted over 5 years ago by Rdoyle1978 – in All Pinball ‐ Last reply yesterday

  ... know what that sound is, and it conveys "the character is playing pinball!" in the split second it's onscreen. If they added the actual Getaway sounds for example, most people would have ...

• CLB
  527 4 yr

  Dragonfist Club Post #151 in topic

  Posted over 5 years ago by slochar – in All clubs (...members only!) ‐ Last reply 8 days ago

  ... later stern and the 'add-a-ball' option frenzy, which in certain combinations can totally break Split Second - it's possible through an innocent setting of dip switches on SS to get endless extra ...

• TE
  4 4 yr

  Royal Flush (76) won’t tilt. Post #1 in topic

  Posted over 5 years ago by newovad – in EM Pinball Tech ‐ Last reply over 5 years ago

  When I got this Royal Flush, it came without a tilt bob connected. Everything is there but it is not quite working. The roll tilt works but the bob tilt doesn’t tilt the game when it hits the sides. You can see a quick spark and hear the tilt relay fire but the game keeps going. If you put the bob against the ring for a split second longer than a typical hit, the game tilts like it should. I’m at a loss. Thoughts?[att=5242168,1755159 caption=""]