Found 4991 posts

Posts mentioning ‘shield’ ordered by in descending order.

• CLB
  1K+ 9 hr

  Galactic Tank Force Owners Club - Get your ice cream here! Post #1468 in topic

  Posted today by Method_Own – in All clubs (...members only!) ‐ Last reply today

  Enjoying the new code. Getting a methane blaster from the LAB now you have 3 tank targets lit blue which is cool. Shield magnet functions a little differently. Shield defense between the flippers seems more active. Some new call outs. None of the videos cause delays but there still are some with no sound. At the end of the game if I match - I get the ‘You Matched’ sequence twice. Cow-A-Bongo seems to run ok but the music is very quiet. Still more work to be done, but it’s progress!

• ALL
  27 14 hr

  Awful pinball themes that should never be made Post #1 in topic

  Posted yesterday by JoelOmatik – in All Pinball ‐ Last reply today

  ... to begin modes and hit front desk scoop to seat your customer. Hit apron drain shield to protect customer from getting hair all over him/her. Toys include the peppermint barbershop ...

• CLB
  3K+ 14 hr

  Venom (Stern) Owner's Club. Choose Your Host, Change the Game! Post #3371 in topic

  Posted yesterday by rai – in All clubs (...members only!) ‐ Last reply today

  ... with the ball in the U-turn area and there’s a shield that keeps the ball from falling out into the cabinet, my shield wasn’t working and all if took me to fix it ... was a little bit of foam tape on the shield. Congrats on the new pin this is a great time to get one since the code ...

• CLB
  1K+ 26 hr

  Galactic Tank Force Owners Club - Get your ice cream here! Post #1448 in topic

  Posted yesterday by gunstarhero – in All clubs (...members only!) ‐ Last reply today

  ... up post / defense post deployment. Robot seems more animated. Magnets seem more active and the shield magnet was way stronger feeling. Still some video clip weirdness at game over and the ...

• LCD
  6 35 hr

  Godzilla premium mechagodzilla shield Post #6 in topic

  Posted yesterday by Tortelvis – in Tech: LCD era games ‐ Last reply yesterday

  ... to 20ms. Stern used two different motors on Godzilla Premiums and LEs to operate Mechagodzilla’s shield of three drop targets, a spinner and a ramp. The one on the left appears to be ... find an answer on Pinside that appears to fix the problem. Adjust the power of “shield motor open delay ms” to 20 ms (Default is 80 ms) Perhaps the factory default ...

• LCD
  6 39 hr

  Godzilla premium mechagodzilla shield Post #5 in topic

  Posted 2 days ago by Creemale – in Tech: LCD era games ‐ Last reply yesterday

  Got the same problem with mine. The shield is constantly turning for no apparent reason Replaced sensor. Called Sten techs etc. Anybody got any solutions?

• STN
  8K+ 44 hr

  What is on the line at Stern Pinball / Production Schedule Post #8158 in topic

  Posted 2 days ago by SantaEatsCheese – in Stern Pinball ‐ Last reply today

  wait, are people loving BKSOR now? Did the code get really good? I really liked it when it came out, the original theme felt very refreshing, but I never spent a lot of time on it and everyone I know with it sold it within a year. Its a great game that I love. The issue is that once you put alot of time on it you learn that you can shoot the shield and lock cradled from the right flipper with very little risk. Once you figure that out it kind of nerfs the game.

• MO
  46 2 dy

  STTNG what is the best looking complete LED conversion kit? Post #44 in topic

  Posted 3 days ago by PocketHoleshot – in All modding! ‐ Last reply 2 days ago

  ... purchase. Your game with the frosted natural (cool) light looks very good. I'll keep the shield inserts and flashers incandescent for now. Now my only conundrum is natural white, or sunlight ...

• MO
  46 2 dy

  STTNG what is the best looking complete LED conversion kit? Post #42 in topic

  Posted 3 days ago by SantaEatsCheese – in All modding! ‐ Last reply 2 days ago

  ... on LED options for STTNG. I know there are ghosting issues with the dimming GI and shield inserts. Do non ghosting bulbs such as those from Comet and PBL not take care ... space in the game where an LED OCD board makes any difference is in the shield inserts. Its 6 bulbs. I left the incandecents in there and it looks just fine. I strongly recommend ...

• MO
  46 2 dy

  STTNG what is the best looking complete LED conversion kit? Post #39 in topic

  Posted 3 days ago by PocketHoleshot – in All modding! ‐ Last reply 2 days ago

  ... on LED options for STTNG. I know there are ghosting issues with the dimming GI and shield inserts. Do non ghosting bulbs such as those from Comet and PBL not take care ...

• HB
  91 3 dy

  Street Fighter II Pinball + Arcade (Homebrew Project) Post #87 in topic

  Posted 3 days ago by Time – in Homebrew pinball ‐ Last reply 3 days ago

  ... room here for it. I like this location because I can use the existing plastic high voltage shield and keep all of the high voltage transforming together. This isn't done done yet because ...

• PLT
  3 3 dy

  Black night SOR (2019) Pro shield issues Post #3 in topic

  Posted 4 days ago by Pinhead_ – in Playing tips ‐ Last reply 4 days ago

  ... how it works. Shield is down, if a mode is lit, shield is up and sinking it starts mode. Shield target on the right raises the shield for lock. Hitting the shield does nothing most of ... above me said, it may be the opto- when the ball hits the lowered shield, does the shield kick a little bit and kind of shoot the ball back towards the drain? If ...

• PLT
  3 3 dy

  Black night SOR (2019) Pro shield issues Post #2 in topic

  Posted 4 days ago by RyThom – in Playing tips ‐ Last reply 4 days ago

  Check the optos in front of the shield to see if they register hits to the lowered shield. I had mine go out a few months ago.

• PLT
  3 4 dy

  Black night SOR (2019) Pro shield issues Post #1 in topic

  Posted 4 days ago by xvilo – in Playing tips ‐ Last reply 4 days ago

  ... supplier. Currently we have Black Knight Sword Of Rage (2019) Pro here, but the big shield that can go up is unclear to us. In some modes it lights up, but ... a fault somewhere), or are we missing something regarding this? Attached an image of the specific shield (in green) and the mentioned light (in purple) [att=8130680,3860841 caption=""]

• O/T
  13K+ 4 dy

  Pinside Vinyl Club Post #13021 in topic

  Posted 4 days ago by gonzo73 – in Sights and sounds ‐ Last reply today

  Judas Priest, Invincible Shield, 2 LP. Finally picked up the Vinyl today... I've been listening to the CD for the last month. Great album, almost as good as Firepower, which was top notch. [att=8130543,3860708 caption=""][att=8130543,3860709 caption=""][att=8130543,3860710 caption=""]

• ALL
  16K+ 6 dy

  The Pinball Visual Quiz Show Post #16663 in topic

  Posted 6 days ago by pinballslave – in All Pinball ‐ Last reply today

  Zooming out... as you can see, it's from a stripped playfiend... First image was a bit unfair because you don't see this bit on the IPDB images, so that would only be recognised by someone familiar with the game... bonus point for getting the playfield behind... :-) This game appears to have a section of playfield (2 sections to be precise) where the ball can't get to which has artwork on the playfield and no light shield... don't know of another game with that 'feature'... [att=8128102,3858447 caption=""]

• CLB
  1K+ 6 dy

  Galactic Tank Force Owners Club - Get your ice cream here! Post #1389 in topic

  Posted 7 days ago by jonnyqtrek – in All clubs (...members only!) ‐ Last reply today

  Good morning! Still dialing in, may I ask how consistent atomic shield stays deployed on your machines? Reseating the coil molex has pretty reliably restored Up Post ... you not the tank two consecutive times while the Defense is green, is the atomic shield supposed to stay up the same duration each of the two times, or is the ...

• STN
  46K+ 7 dy

  *~*THE~NEXT~STERN*~* Post #46686 in topic

  Posted 7 days ago by Yoko2una – in Stern Pinball ‐ Last reply today

  ... return to the right flipper. The left-most VUK, the left orbit, the ramp, the shield VUK, and any shot into the pops all come back to the right flipper. That ...

• O/T
  3K+ 7 dy

  I'm trying to find a GOOD TV series to watch Post #3726 in topic

  Posted 8 days ago by BMore-Pinball – in Sights and sounds ‐ Last reply today

  If you're not a fan of Oliphant or Goggins though you should bail now, since they're basically the show! Been following him since the Shield - one of my favorite actors

• CLB
  1K+ 9 dy

  Galactic Tank Force Owners Club - Get your ice cream here! Post #1379 in topic

  Posted 9 days ago by jonnyqtrek – in All clubs (...members only!) ‐ Last reply today

  ... gotten so far); the hole for the up-post is definitely larger than the "Atomic Shield" plug on this Dec 2023 build. Cheers!

• RSD
  156 11 dy

  Medieval Madness cabinet and playfield Refreshtoration Post #154 in topic

  Posted 11 days ago by pinballinreno – in Restorations documented ‐ Last reply 4 days ago

  I just saw this metal shield for your castle, I kinda like it, and its cheap. https://pinside.com/pinball/shops/shop/1070-hookedonpinballcom/04691-medieval-madness-castle-shield-cast-metal-not-3d-print-

• CLB
  4K+ 12 dy

  The Firepower Club Post #4673 in topic

  Posted 12 days ago by Billc479 – in All clubs (...members only!) ‐ Last reply 2 days ago

  ... NMP boards to think a drop target dropped. A fix has been found - basically, it’s a small metal shield that reduces the effect of the pop bumper operation on the NMP sensor. There’s several ...

• MO
  4 12 dy

  Labyrinth Mod thread - It's only forever, not long at all. Post #4 in topic

  Posted 13 days ago by MalikyeMoon – in All modding! ‐ Last reply 13 days ago

  I have had the ball backspin several times when shooting from the upper flipper to the right-hand center ramp (the one that dumps into the left orbit) and hop up onto the molded 2-door decoration. We need a small clear shield to fill the gap on that side of the first curve on the ramp to prevent it from hopping up there.

• CLB
  4K+ 13 dy

  The Firepower Club Post #4667 in topic

  Posted 14 days ago by MooglyMoog – in All clubs (...members only!) ‐ Last reply 2 days ago

  ... the target switches on the drops due to the NMP boards I installed. I believe adding a metal shield fixes it, I'm getting to it.

• CLB
  4K+ 16 dy

  Ultraman Kaiju Rumble Club - Kaiju are near! Post #4957 in topic

  Posted 17 days ago by Gunner007 – in All clubs (...members only!) ‐ Last reply 10 days ago

  ... a link to some instructions I put together detailing how to change out that deflector shield: https://tinyurl.com/ytzx78fk Funny thing I took mine out. Glued the broken piece then ... went to reinstall. I didn't realize the snot shield on the right side also has 2 nuts. My shield was broken in two places on the right side. I'm looking ... at maybe adding a 2x2mm strip to reinforce the shield. Or lexan if I can find a small enough piece. A laser cutter would be ideal ...

• CLB
  4K+ 16 dy

  Ultraman Kaiju Rumble Club - Kaiju are near! Post #4956 in topic

  Posted 17 days ago by John_C – in All clubs (...members only!) ‐ Last reply 10 days ago

  Replacing the shield can be a bit of a chore. You don't have to remove the middle playfield, but you do have to remove some screws that allow you lift the playfield allowing you to easily access the nylock nuts. If you have small hands, you might be able to access those nylock nuts without having to raise up that middle playfield. Here is a link to some instructions I put together detailing how to change out that deflector shield: https://tinyurl.com/ytzx78fk

• CLB
  4K+ 16 dy

  Ultraman Kaiju Rumble Club - Kaiju are near! Post #4955 in topic

  Posted 17 days ago by alexorear – in All clubs (...members only!) ‐ Last reply 10 days ago

  Finally decided to swap out the springs in the drop targets on my game. I don't remember which springs I bought as I purchased them back last summer, but it made a huge difference. Previously my targets would constantly reject the ball and stay standing, now they drop with easy. Wonder if this is what caused my ball shield to break. I have the replacement that used to be offered on Pinside. That will be the next thing I do to the game. Not looking forward to how much work that is going to be.

• PFR
  4K+ 18 dy

  KRUZMAN monthly playfield thread Post #4474 in topic

  Posted 19 days ago by pjflyer – in Playfield restoration ‐ Last reply yesterday

  ... the inserts in different places in the pf. I know a few pages back I asked about STTNG shield inserts and you said it was the clear coming off the inserts. Is this the ...

• CLB
  27K+ 19 dy

  Stern Godzilla Official Owners Club King Elwin Post #27190 in topic

  Posted 19 days ago by flipperstick – in All clubs (...members only!) ‐ Last reply today

  Anyone know how to adjust the shield ramp/spinner? Mine is clearly not aligned properly. [att=8106556,3839259 caption=""][att=8106556,3839257 caption=""][att=8106556,3839258 caption=""]

• BOO
  111 19 dy

  Halloween and Ultraman Modders Come on in! Post #106 in topic

  Posted 20 days ago by John_C – in Spooky Pinball ‐ Last reply 18 days ago

  Any one have a scan of the triple drop protector? I'm going to get a friend to 3d print it. Broken again. I offer improved versions of that ball deflector shield. These won't break and you'll never again worry about having to replace it. https://pinside.com/pinball/market/classifieds/ad/164797[att=8106139,3838798 caption=""]

• EM
  4K+ 21 dy

  what e.m. are you working on right now? Post #4113 in topic

  Posted 21 days ago by erak – in EM Pinball Hangout ‐ Last reply 6 days ago

  ... use water slide decals. And spray paint. Reverse painted .And put it on some face shield plastic. It's looks great. And is perfect for a fix untill I can find originals. I would have ...

• CLB
  18K+ 21 dy

  JJP Pirates of the Caribbean Official Owners and Fan Club! Post #18817 in topic

  Posted 22 days ago by EaglePin – in All clubs (...members only!) ‐ Last reply today

  ... Black Pearl Stand-up Target Illuminated Window. Looks good but most importantly also acts as a shield for the optos to protect them from balls hitting them as they come out of ... ://pinballmods.co/pirates-of-the-caribbean-jjp/arrrr-the-decals I also put in the Cannon Shield from Pinball Life to keep balls from bouncing back off the target ship and rolling ...

• MMO
  24 21 dy

  3rd Party P3 Game: Bird Watcher from Ian Harrower Games Post #19 in topic

  Posted 22 days ago by imharrow – in Multimorphic ‐ Last reply 22 days ago

  ... this. 1. For FR, in some cases after calibration at the start of the game, the Shield may not correctly return to the up position. If you are having issues, you can ... enable a new option in Settings/Mechs/Shield to lower and raise the shield at the start of the game and it should resolve this. 2. On WAMONH ... no ball being in play - Added a new option if Settings/Mechs/Shield that can be used to work around shield being too low in some corner cases on Final Resistance. - New audio ...

• CLB
  3K+ 22 dy

  Venom (Stern) Owner's Club. Choose Your Host, Change the Game! Post #3158 in topic

  Posted 22 days ago by rai – in All clubs (...members only!) ‐ Last reply today

  ... that’s also something to experience, but I fixed it with some foam tape to make the shield / blocker a bit more blockier.

• CLB
  3K+ 23 dy

  Jaws Owners "We're Going To Need a Bigger Club" Post #2635 in topic

  Posted 24 days ago by Shapeshifter – in All clubs (...members only!) ‐ Last reply today

  A few posts back, someone mentioned the shadows on the pro translight. Especially top edges - see pic. From the metal underneath. A simple mod I may do if no one else does, is a simple 3D printer light shield that covers the super bright LED's on the main board. Would need 2 - one for each set of LED's. Translights have definitely got thinner! On the plus side, the metal ramps on the pro are fantastic, so much better than plastic. They make the shots a joy to hit :-)[att=8099708,3833253 caption=""]

• ALL
  12 24 dy

  Compare Your Wear: a 22-year case study Post #7 in topic

  Posted 25 days ago by CrazyLevi – in All Pinball ‐ Last reply 24 days ago

  ... we think they do. And I get annoyed playing a game where a "lane protector" or playfield plastic shield has caused a ball hangup. And, I'm "genuinely curious" about seeing some other before and after pics ...

• CLB
  3K+ 27 dy

  Jaws Owners "We're Going To Need a Bigger Club" Post #2465 in topic

  Posted 27 days ago by PinMonk – in All clubs (...members only!) ‐ Last reply today

  ... "i", "l" and "t" for "tilt" and to make that worse, it's straddling a line from the clear paper shield the typewriter ribbon rides so cause of death reads like "tit addiction" instead of "tilt ...

• MFS
  40 27 dy

  RARE (Tier 7) Pinball Machine: Tales of the Arabian Nights Post #5 in topic

  Posted 28 days ago by Lhyrgoif – in Pinball machines for sale ‐ Last reply 24 days ago

  ... . The skillshot assembly is missing both the snake plastic above the light and the plastic shield that should be mounted to the left to prevent balls from falling out. The backbox ...

• CLB
  15K+ 28 dy

  007 James Bond Owners Club - From Stern With Love Post #15002 in topic

  Posted 29 days ago by gumnut01 – in All clubs (...members only!) ‐ Last reply today

  ... ships spinners kept breaking because the VUK behind slammed the ball into them (they created a shield after I raised it with them) 4) the one way gate had issues near my “I” lane and ...

• CLB
  3K+ 30 dy

  Multimorphic P3 Club Post #3566 in topic

  Posted 30 days ago by gunstarhero – in All clubs (...members only!) ‐ Last reply 10 days ago

  Received my FIRE yesterday and installed today... it's working GREAT except two things... I have had a few balls get stuck between the rubbers on the Shield. They generally work their way out but is there a fix? Is there any way to turn off my Weird Al topper? I remember there was an option but I think it's in the Weird Al menu. Also any advice on setting this game up for competition?

• CLB
  194 30 dy

  Final Resistance Club - Join The Fight - Everyone Welcome Post #141 in topic

  Posted 30 days ago by gunstarhero – in All clubs (...members only!) ‐ Last reply 4 days ago

  Hello all! Set up my FiRe today and everything seems good... except the ball gets stuck between the rubbers on the shield occasionally and needs to get worked out by the ball save. Is there any way anyone has come up with to avoid this? I want to use the game in our league and don't want a bunch of down time or glass offs. Also if anyone has any tips how to set this game up for competition I am all ears! Thanks.

• MMO
  829 30 dy

  Scott Danesi Game #3 Final Resistance! - Multimorphic 2023 (REVEAL TRAILER) Post #828 in topic

  Posted 30 days ago by gunstarhero – in Multimorphic ‐ Last reply 30 days ago

  Hey all! Set up my FiRe today and everything seems good... except the ball gets stuck between the rubbers on the shield occasionally and needs to get worked out by the ball save. Is there any way anyone has come up with to avoid this? Also if anyone has any tips how to set this game up for competition I am all ears! Thanks.

• CLB
  11K+ 31 dy

  Official TRON lovefest thread Post #11618 in topic

  Posted 32 days ago by MutterFudder – in All clubs (...members only!) ‐ Last reply 4 days ago

  ... can check for alignment and proper operation in the switch test menu. Just lower the shield in front in service menu and then throw a ball in to the area. Make sure ...

• MO
  163 34 dy

  PEMBOT (no relation) Post #160 in topic

  Posted 34 days ago by TevB – in All modding! ‐ Last reply 30 days ago

  I finally got mine installed today. Dave, what a fantastic job! Thank You! The new rules are awesome. Love the variations and Super Planets. If I may, a suggestion for potential could-be new update: would it be possible to adjust the Shield’s (ball save) time? i.e. On High Roller Casino, you can set it up to 15 seconds. This would make my son (9 yr old) happy. Cheers, and Thank You for the wonderful program.

• TRA
  2K+ 34 dy

  Vehicles that a Pinball Machine Fits in Post #2527 in topic

  Posted 34 days ago by JToeps – in Transportation questions ‐ Last reply today

  So close but a modern stern does NOT fit in the Rivian R1S with a simple folded backbox. You could probably jam it in there if you didn't care about the ceiling fabric, and took off the power shield. The fold down tailgate also makes it impossible to "up and under" the high water mark. Maybe the R2's single piece rear door helps here? (tried rear-first as well, no dice) [att=8081598,3818084 caption=""][att=8081598,3818085 caption=""][att=8081598,3818086 caption=""][att=8081598,3818088 caption=""]

• RSD
  212 35 dy

  1979 Williams Flash Restoration Post #198 in topic

  Posted 36 days ago by adamtoth – in Restorations documented ‐ Last reply today

  ... a reference. Had to cut away a leg of the upper flipper base plate, ordered an NMP shield for the pop bumper interference, had to file out Star rollovers inserts so the stars ...

• CLB
  2K+ 35 dy

  Flash Gordon: Saviors of the Universe Club Post #2787 in topic

  Posted 36 days ago by hodgesm0 – in All clubs (...members only!) ‐ Last reply 5 days ago

  ... wire to the 2-pin Molex connector, orientation does not matter. the third white wire is a "Shield Ground", I connected this to a ring terminal and used the factory screw from the original transformer ...

• CLB
  27K+ 39 dy

  Stern Godzilla Official Owners Club King Elwin Post #26992 in topic

  Posted 40 days ago by Mleiter – in All clubs (...members only!) ‐ Last reply today

  ... the BOC songs intro starts. What a great pinball moment. The mecha-Godzilla with the rotating shield is really cool and is the only thing I sorta miss on my Pro. But not ...

• CLB
  27K+ 40 dy

  Stern Godzilla Official Owners Club King Elwin Post #26986 in topic

  Posted 40 days ago by Whistles – in All clubs (...members only!) ‐ Last reply today

  Get the Premium, you wont regret it! The mechagozilla turntable basically completes the lower 2/3rds of this machine into a "whole" experience. You can just play down there and never worry about ramps if you don't want. The three targets on the shield are brilliant imo as well, and makes it so there are many shots over there and not just one.

• CLB
  22K+ 41 dy

  Stranger Things Club. Join our Party! Post #21889 in topic

  Posted 42 days ago by DiabloRush – in All clubs (...members only!) ‐ Last reply today

  ... improve performance include ensuring the actutator rod touches nothing else (including the ramp and the shield plastic) and eliminating slop in the actuator linkage, done by adding and replacing washers on ...

• RSD
  212 41 dy

  1979 Williams Flash Restoration Post #193 in topic

  Posted 42 days ago by Impzilla – in Restorations documented ‐ Last reply today

  The good news is that he has a shield you can install on the back of the NMP board that prevents the inference from the bottom pop bumper's magnetic field Got a link for that shield? Thx.

• CLB
  7K+ 41 dy

  The Big Lebowski - Official Owners Club thread Post #7048 in topic

  Posted 42 days ago by Scotty_K – in All clubs (...members only!) ‐ Last reply yesterday

  Very nice - may I inquire about the plaque, or whatever this is? I can read what it says, just want to know what is it specifically, and where'd ya get it?[quoted image] Looks to me like it's a glare shield that had one of the Dude's quotes added to it. Very nice!

• ALL
  52 41 dy

  Is rarity a consideration with your collection? Post #21 in topic

  Posted 42 days ago by mbaumle – in All Pinball ‐ Last reply 41 days ago

  I buy and collect games I want to play. Rarity really doesn’t have any influence. It’s cool when there’s games I want to play and own that are also rare, like TX-Sector or pinball magic, but that introduces stresses like “how will I rebuild these flippers with zero parts availability” or “what happens if a plastic light shield breaks?” Rare games are also usually rare for a good reason.

• STN
  7K+ 41 dy

  Dah dum…Jaws hype thread. Post #7326 in topic

  Posted 42 days ago by MacGruber – in Stern Pinball ‐ Last reply 17 days ago

  Played the premium last night. Ironically, the shark kept taking the ball to Davey Jones locker! At first, it was funny, but then we realized we gota wait for ball search everytime. Nobody complaining about this? Or was this machine missing a deflector/shield of some kind? The last 2 nights it got deactivated in the tournaments but I'm not sure why other than games were lasting 45 minutes.

• CLB
  984 42 dy

  Flash owners club...official.. Post #955 in topic

  Posted 43 days ago by Mathazar – in All clubs (...members only!) ‐ Last reply 22 days ago

  PSA for Flash owners: If you installed the NMP drop target magnet solution for the 3-bank assembly and are experiencing phantom scoring when the bottom pop bumper fires, you may need a mu-metal foil shield for the NMP PCB. See here: https://pinside.com/pinball/forum/topic/1979-williams-flash-restoration-1/page/4#post-8066018[att=8067123,3806411 caption=""]

• RSD
  212 43 dy

  1979 Williams Flash Restoration Post #192 in topic

  Posted 43 days ago by Mathazar – in Restorations documented ‐ Last reply today

  ... this sometimes happens on Flash and on Gorgar. The good news is that he has a shield you can install on the back of the NMP board that prevents the inference from ... and I installed it tonight. No more phantom scoring issue! NO SHIELD & CLOSE TO BOTTOM POP BUMPER: [att=8066018,3805791 caption=""] SHIELD INSTALLED WITH ASSEMBLY OUT: [att=8066018,3805792 caption=""] ASSEMBLY INSTALLED WITH ...

• LCD
  7 45 dy

  Am I missing something? LCD question (missing screws?) Post #6 in topic

  Posted 45 days ago by DugFreez – in Tech: LCD era games ‐ Last reply 45 days ago

  ... back down on them. So, the screen was just kind of floating 1/2" behind the clear shield behind the panel and being held in place by the speaker plates on each side ...

• LCD
  7 45 dy

  Am I missing something? LCD question (missing screws?) Post #4 in topic

  Posted 45 days ago by DugFreez – in Tech: LCD era games ‐ Last reply 45 days ago

  ... I can tell you this: The screen SHOULD be up against the back of the plastic shield that is on the back of the speaker panel and there SHOULD NOT be any ...

• CLB
  16K+ 46 dy

  Halloween owners thread…He’s Coming Home Post #16789 in topic

  Posted 47 days ago by TheCnyPinGuy – in All clubs (...members only!) ‐ Last reply today

  ... ][quoted image][quoted image] Thank you so much Emailed Spooky I also thought about creating a protective shield for the exposed LEDs I’ll Follow up soon

• HB
  223 48 dy

  Homebrew Spectra 6 Post #204 in topic

  Posted 49 days ago by stefanmader – in Homebrew pinball ‐ Last reply 17 days ago

  Well the shield servo broke again, weird, maybe when the whole eyeball moves it is just too much to handle. Hm i am getting on with similar size and metal gears inside, hope that will solve it.

• PFR
  4K+ 49 dy

  KRUZMAN monthly playfield thread Post #4331 in topic

  Posted 49 days ago by Mathazar – in Playfield restoration ‐ Last reply yesterday

  There has not been any pics of the sttng except prep pics. the shield inserts had cracks around them. needed to be glues and painted, as well as like 8 ... marks kind of diffuse and seem to disperse the light a little more evenly vs. the shield inserts on my original playfield (which is really bad inserts-wise). Will be interesting to ...

• PFR
  4K+ 49 dy

  KRUZMAN monthly playfield thread Post #4323 in topic

  Posted 50 days ago by kruzman – in Playfield restoration ‐ Last reply yesterday

  I just put a final coat on JJP pirates of the Caribbean #1 there are 2 of them here, and Iron maiden. I believe all of these coats are final coats. with the temp and humidity lately, the coats are looking so perfect. Its hurts to block them down when they look this good! There has not been any pics of the sttng except prep pics. the shield inserts had cracks around them. needed to be glues and painted, as well as like 8 other inserts. I finally got the warp out of it.

• PFR
  4K+ 49 dy

  KRUZMAN monthly playfield thread Post #4321 in topic

  Posted 50 days ago by pjflyer – in Playfield restoration ‐ Last reply yesterday

  Did I miss the pictures of the STTNG? I have one and have an issue with the shield inserts looking like they are delaminating (I'm not sure what to call it). The rest of the pf is still nice.

• O/T
  187 49 dy

  Total Solar Eclipse 4/8/24 Post #15 in topic

  Posted 50 days ago by Billc479 – in Generally off-topic ‐ Last reply 9 days ago

  For welding shield, make sure its a level 14

• CLB
  10K+ 50 dy

  Jurassic Park (DATA EAST) club Post #10069 in topic

  Posted 51 days ago by Preacher – in All clubs (...members only!) ‐ Last reply 2 days ago

  Nice! Mine was still running 3.0 when I got it. I upgraded to 6.0 after a few months and the score balancing and event randomizations made it play almost like a whole new game (for the better). for me, the drain shield lamp and the skip t-rex diagnostics was the gamechanger, followed close by randomized events and the Last Action Hero preview!

• EV
  5 51 dy

  BPAC 2024 - July 17th to 21st Post #5 in topic

  Posted 51 days ago by JimmyNails – in Events ‐ Last reply 51 days ago

  BPAC 2024 - Welcome to the Clubhouse Tickets on sale tomorrow, Friday the 1st of March from midday via Humanitix https://events.humanitix.com/bpac2024 Thanks to all our sponsors Thanks to Nelson Gibbins and Luke Shield for another stunning art package Thanks to everyone working behind the scenes Let's get it mates #bpacislife [att=8053446,3795162 caption=""]

• CLB
  13K+ 53 dy

  Foo Fighters Official Owners club - "Rock Aliens" Post #11046 in topic

  Posted 53 days ago by PinMonk – in All clubs (...members only!) ‐ Last reply today

  Getting stuck here lately. Funny bounce [quoted image] I just made a GnR airball shield work there to stop that trap. [att=8049923,3791862 caption=""]

• CLB
  16K+ 53 dy

  Halloween owners thread…He’s Coming Home Post #16705 in topic

  Posted 53 days ago by monitorpop – in All clubs (...members only!) ‐ Last reply today

  ... max sound distorted. Also, an external sub is amazing on this game. 2. The clear ball shield above the drop targets broken at the right side connection points pretty easily. Cheap and ...

• TDM
  70 56 dy

  Are there any DMD games you think do NOT look better with a color DMD? Post #64 in topic

  Posted 56 days ago by mrossman5 – in Tech: DMD era games ‐ Last reply 44 days ago

  I never cared for the orange on my spiderman, but I sold it before putting a colorDMD in so I don't know if that would have been an improvement or not. A red shield is great. Stole one out of my GOT when I changed it to color-dmd.

• MA
  3 56 dy

  Playfield Protectors | Elton John All Versions - Shipping now! Post #1 in topic

  Posted 57 days ago by protectors – in Announcements ‐ Last reply 25 days ago

  ... playfield and plastic protectors for a comprehensive protection solution for these iconic titles. Gear up to shield and preserve your favorite games with our latest offerings! Elton John (Collectors Edition) | 2023 Playfield ...

• MA
  5 56 dy

  Playfield Protectors | Pulp Fiction All Versions - Shipping now! Post #1 in topic

  Posted 57 days ago by protectors – in Announcements ‐ Last reply 16 days ago

  ... playfield and plastic protectors for a comprehensive protection solution for these iconic titles. Gear up to shield and preserve your favorite games with our latest offerings! Pulp Fiction | 2023 Playfield Protector https ...

• MA
  2 56 dy

  Playfield Protectors | Jaws All Versions - Shipping now! Post #1 in topic

  Posted 57 days ago by protectors – in Announcements ‐ Last reply 53 days ago

  ... playfield and plastic protectors for a comprehensive protection solution for these iconic titles. Gear up to shield and preserve your favorite games with our latest offerings! Jaws (Limited Edition) | 2024 Playfield Protector ...

• CLB
  13K+ 58 dy

  Foo Fighters Official Owners club - "Rock Aliens" Post #10861 in topic

  Posted 59 days ago by thekiyote – in All clubs (...members only!) ‐ Last reply today

  ... more. I usually try to mod a bit. It does increase your points in modes for the shield and engine, especially if you can one shot it, and the bombs does make it ...

• O/T
  20K+ 59 dy

  Stock Market Traders? Post #20493 in topic

  Posted 60 days ago by pinnyheadhead – in Generally off-topic ‐ Last reply today

  ... actions and ask himself “how can I take advantage of all this and make money and shield myself from the down times ”. :wink:

• CLB
  1K+ 60 dy

  Galactic Tank Force Owners Club - Get your ice cream here! Post #1192 in topic

  Posted 61 days ago by MrSanRamon – in All clubs (...members only!) ‐ Last reply today

  ... 5. Semi-endless multiball 6. Ball goes through "Lucky Break" and isn't saved (lite is lit) 7. Atomic Shield lip gets hung up on the playfield and doesn't retract So there are only a few ...

• TDM
  7 61 dy

  Loudly humming transformer Post #6 in topic

  Posted 61 days ago by Doctor6 – in Tech: DMD era games ‐ Last reply 54 days ago

  ... a loud general "electric sound" that seemingly wasn't coming out of anywhere in particular. Removed this shield, sounds quiet ever since. So, I only wish to add my positive response to this for ...

• O/T
  803 61 dy

  Getting Organized with EJS, Little Johnny, and Zartan Post #751 in topic

  Posted 62 days ago by PlanetExpress – in Generally off-topic ‐ Last reply 8 days ago

  ... =8036635,3779888 caption=""] Looks like the trough and ball lift are complete. I’m used to seeing a shield inside the ball lift channel, which isn’t in this machine, but I don’t see any holes ...

• CLB
  22K+ 62 dy

  Stranger Things Club. Join our Party! Post #21251 in topic

  Posted 63 days ago by ScottyC – in All clubs (...members only!) ‐ Last reply today

  ... . Not safe to install the IC reader where it came from the factory IMO. The shield on the reader is like 1mm away from the positive pad on the UV light ...

• O/T
  454 63 dy

  Disney Thread - Welcome to the World of Disney! Post #242 in topic

  Posted 63 days ago by ManbearpigOG – in Generally off-topic ‐ Last reply 3 days ago

  Well to my surprise 3.5 of the pins work at Pop this time. Still dirty AF, but playable. But all new rubbers. Tron works the best (no recognizer shield). SW actually worked this time, but the C and E on force are still broken. X-men worked ok, but the auto launch for MB and the right flippers are super weak. GOTG no right flipper. [att=8034214,3777539 caption=""][att=8034214,3777537 caption=""][att=8034214,3777538 caption=""][att=8034214,3777536 caption=""]

• CLB
  5K+ 64 dy

  Black Knight - Sword of Rage Club - Honourable Knights Only Post #5487 in topic

  Posted 65 days ago by Merendino – in All clubs (...members only!) ‐ Last reply yesterday

  I’ve had the pro and now the LE and have come to the conclusion that the Black knight and shield is the best mech Stern have ever designed. Unless your shield arm has a groove from the post screw; this prevents the screw from tightening as firm as it should which then causes issues with the shield lifting high enough to allow the ball to roll underneath. Such a PITA thing to deal with. I've been resisting the urge on buying a new assembly.

• CLB
  3K+ 66 dy

  Data East pinball club Post #3003 in topic

  Posted 66 days ago by vec-tor – in All clubs (...members only!) ‐ Last reply yesterday

  I was wondering what the cardboard remnant was on the side of the cabinet in the JP. [quoted image] Well, the R&B still had it in there. [quoted image] That was supposed to be a shield for the arcade tenant. One can have access to the volume control and cash box without having to get shocked By the +50 volt flipper coils.

• CLB
  13K+ 66 dy

  Wonka Club - Golden Tickets Inside Post #13732 in topic

  Posted 67 days ago by zermeno68 – in All clubs (...members only!) ‐ Last reply today

  The newest JJPs have full backglass lighting. Godfather and EJ. One thing to be aware of is that full lighting can introduce glare into the camera. GF and EJ both have a little light shield to prevent this. I'll get a pic and post it here FYI. Oh.. that would be awesome if you can provide that shield. I added the cool white backglass area and it does introduce glare where photos are grainy. Just feel like the photo should be of better quality. Adding the shield could finally settle the conversation for me.

• CLB
  13K+ 66 dy

  Wonka Club - Golden Tickets Inside Post #13731 in topic

  Posted 67 days ago by DiabloRush – in All clubs (...members only!) ‐ Last reply today

  The newest JJPs have full backglass lighting. Godfather and EJ. One thing to be aware of is that full lighting can introduce glare into the camera. GF and EJ both have a little light shield to prevent this. I'll get a pic and post it here FYI.

• RSD
  212 67 dy

  1979 Williams Flash Restoration Post #159 in topic

  Posted 67 days ago by Mathazar – in Restorations documented ‐ Last reply today

  ... ring - outhole kicker arm 20-10110-5 Flipper & shaft - Williams logo white 03-9101 Eject shield - white A-17808 Z coil bracket B-7572-1 SW-1A-120 Leaf switch - slingshot normally open SW-11A ...

• RFS
  20K+ 67 dy

  Official Wisconsin-Minnesota Thread Post #20590 in topic

  Posted 68 days ago by CyberNinja24 – in Regional for sale threads ‐ Last reply yesterday

  Greetings Gang. I’ve got two dart boards that I’m open to selling or trading for pins if anyone is interested. One is a Cougar 8 that guys seem to like since you can play against Ernie. The other is an Arachnid 2 with a new Monitor and new protective shield around the monitor. Both are in excellent, working shape. Please PM if interested. Thanks.

• MT
  265 68 dy

  Neo Fusion Atom Post #228 in topic

  Posted 68 days ago by pinstadium – in Pinball mods/toppers market ‐ Last reply today

  ... visualized in dynamic light patterns across your machine. Assemble the Full Team: From Captain America's shield to the vibrancy of the Infinity Stones, Neo "X" Atoms make every iconic detail explode with ...

• STN
  7K+ 69 dy

  Dah dum…Jaws hype thread. Post #6938 in topic

  Posted 70 days ago by PinMonk – in Stern Pinball ‐ Last reply 17 days ago

  ... out in the parlor beginning of the week. @swinks bracket is a better solution than a plastic shield on top of the playfield. It angles the targets almost imperceptibly forward AND raises the ...

• AP
  982 69 dy

  A.P. says Tanks! But nothing is over until we say it's over! Post #744 in topic

  Posted 70 days ago by 1963BSARGS – in American Pinball ‐ Last reply 56 days ago

  ... the whole them in general. It even shoots great and use of the magnet as a shield is crazy cool. Labyrinth is a theme that I would never even consider ordering. For me, Labyrinth ...

• MO
  89 69 dy

  A modern, minimal spotlight fixture Post #53 in topic

  Posted 70 days ago by Sorokyl – in All modding! ‐ Last reply 4 days ago

  ... equally. the only direction its not casing light is back toward the base. Here, the shield helps focus light in a cone A LED bulb without the round lense happens to already emit ...

• CLB
  28K+ 70 dy

  The Official JJP GnR Owners Thread Post #27581 in topic

  Posted 70 days ago by wrd1972_PinDoc – in All clubs (...members only!) ‐ Last reply today

  Maybe the stud itself is the ball shield. Since that plate is flush with the rollover guide, they could not have used a screw.

• CLB
  10K+ 70 dy

  Terminator 2 Club....Members Only! Post #10789 in topic

  Posted 70 days ago by MG7322 – in All clubs (...members only!) ‐ Last reply yesterday

  ... , and backglass artwork, with the exception of a small picture of actor Robert Patrick on a light shield. With the game still in development, by the time the DMD programming was finalizing (which ...

• CLB
  1K+ 70 dy

  Galactic Tank Force Owners Club - Get your ice cream here! Post #1132 in topic

  Posted 71 days ago by 1963BSARGS – in All clubs (...members only!) ‐ Last reply today

  ... . This game is a hidden gem! The code is very ingenious! I love the tank shield and the defense shield. It’s very cool how the color changes to let you know when you are ... running out of shield time. I don’t understand the complaints about the tank placement. That’s the whole point of the ...

• CLB
  28K+ 70 dy

  The Official JJP GnR Owners Thread Post #27575 in topic

  Posted 71 days ago by wrd1972_PinDoc – in All clubs (...members only!) ‐ Last reply today

  Hey folks. I found this clear ball shield looses in the cabinet. It has -29 printed on it and I cant find where it goes. Help please. :)[att=8022264,3768557 caption=""]

• MO
  89 72 dy

  A modern, minimal spotlight fixture Post #24 in topic

  Posted 72 days ago by Sorokyl – in All modding! ‐ Last reply 4 days ago

  ... in that direction, it won't reflect anything. I think the main point of it is to shield bulb from POV. The design is from an age when the incandescent bulbs must have ...

• CLB
  10K+ 72 dy

  The Shadow Club Post #10866 in topic

  Posted 73 days ago by cookpins – in All clubs (...members only!) ‐ Last reply 5 days ago

  Unobtanium, shield your eyes!

• BOU
  1K+ 74 dy

  Another New Pin Reveal 12/16/19: Punny Factory Post #1461 in topic

  Posted 75 days ago by LORDDREK – in Boutique pinball ‐ Last reply yesterday

  While skipping the groove is a ghetto move putting a metal shield so close to the plunger is clear cut stupidity. Higher or further up the ball would likely stabilize and not end up striking it. Not being able to get the ball into play is a game over scenario…

• CLB
  5K+ 75 dy

  Black Knight - Sword of Rage Club - Honourable Knights Only Post #5476 in topic

  Posted 76 days ago by hockeymutt – in All clubs (...members only!) ‐ Last reply yesterday

  ... and now the LE and have come to the conclusion that the Black knight and shield is the best mech Stern have ever designed. Game is totally underrated, and should be ... stopped pumping money in this after the first game. Wish they would had made the shield a ramp with diverter left ramp for left flipper right for right flipper. would had balanced ...

• CLB
  5K+ 75 dy

  Black Knight - Sword of Rage Club - Honourable Knights Only Post #5475 in topic

  Posted 76 days ago by koji – in All clubs (...members only!) ‐ Last reply yesterday

  I’ve had the pro and now the LE and have come to the conclusion that the Black knight and shield is the best mech Stern have ever designed. Agree. Esp when you try to consider mechs as they directly impact gameplay. Having a physical shield and flail that can actually fire the ball back is amazing.

• CLB
  5K+ 75 dy

  Black Knight - Sword of Rage Club - Honourable Knights Only Post #5474 in topic

  Posted 76 days ago by Kenz – in All clubs (...members only!) ‐ Last reply yesterday

  I’ve had the pro and now the LE and have come to the conclusion that the Black knight and shield is the best mech Stern have ever designed.

• CLB
  1K+ 75 dy

  Swords Of Fury owners Club Fans Also Welcome Post #1639 in topic

  Posted 76 days ago by CalibrunKnight – in All clubs (...members only!) ‐ Last reply 55 days ago

  ... once. Almost like mini modes in a sense. What do you mean “recover the shield”? I think starting multiball will relight the kickback (aka shield). Yes, the left outlane kick back is labeled as ... "Shield" if I'm not mistaken. What play strategies is everyone using? At the start, I try and ...