Search the forum

Use the search box to search through all content on the forum.

Click here for a quick explanation of the search feature.


Tip: You may also try your search for 'heads up' using Google.












Found 8189 posts

Posts mentioning ‘heads up’ ordered by in descending order.

  • CLB

    Guardians of the Galaxy owner's thread Post #6247 in topic

    Posted today by ExSquid – in All clubs (...members only!) ‐ Last reply today

    When the family plays make sure you have the game set to select / start a mode at ball launch, that is factory default and makes the game more approchable as that scoop can be rather tough. Ah, Ill check that out. I was messing around in the menus when it got to my house and probably changed that setting. Thanks for the heads up!

  • CLB

    "Morning MU/TH/UR" Pinball Brothers Alien Remake Owners Club Post #4209 in topic

    Posted today by Baggerman – in All clubs (...members only!) ‐ Last reply today

    It should eject real softly to the left upper flipper. thank you.. I went into settings for the coil and reduced power by 35% and it is doing just that right now. I also looked at the default flipper positions and have to say they were really off. I adjusted all flipper positions and the machine is shooting better. So heads up to those recieving their pins shortly, check the flipper positions and adjust as needed.

  • RFS

    Anybody in Canada have any pins they want to sell? Post #18313 in topic

    Posted yesterday by Kare9 – in Regional for sale threads ‐ Last reply today

    Just a heads up, be extremely careful of people wanting to rent your machines. A local here lost a couple pins to theft in this kind of arrangement.

  • ALL

    3D printing sharing thread.... Lets better the hobby Post #1306 in topic

    Posted 2 days ago by Oneangrymo – in All Pinball ‐ Last reply today

    That’s an oxymoron. Be prepared to spend hours learning how to print and make adjustments to get things right. That said, an Ender 3 is a good entry level device with lots of online support. It’s also cheap enough that you don’t have to break the bank to figure out whether you want to stick with this hobby. Ugh I think my brain has reached maximum capacity. Ill just use one of these online companies to 3d print for me Thanks for the heads up and information.

  • CLB

    The Lord of the Rings LOTR Journey begins here members club Post #7808 in topic

    Posted 3 days ago by Ramrod215 – in All clubs (...members only!) ‐ Last reply yesterday

    I will post the photo tomorrow thank you for the heads up I don't have any unpainted photos up. It's basicly the same thing texture wise but all green translucent color Do you have pictures of unpainted to compare? [quoted image]

  • O/T

    Cryptocurrency, Bitcoin, and Decentralized Finance (DeFi) Post #4875 in topic

    Posted 3 days ago by Spyderturbo007 – in Hobbies without flippers ‐ Last reply today

    ... project. They aren’t out spouting off on social media or drumming up hype somewhere. They just seem to put their heads down and get it done. But don’t listen to me. I’m just ...

  • STN

    Stern Godzilla Official Owners Club King Elwin Post #3779 in topic

    Posted 3 days ago by jonnyqtrek – in Stern Pinball ‐ Last reply today

    24bil? Uhh.. something is wrong with your game dude. You should probably look for some switches registering unexpectedly Hmmm... This would certainly explain why it's only happened 3 times... Thanks for the heads-up, i'll check it out!

  • MO

    JJP Guns N' Roses - sculpted mods by THE ART OF PINBALL ****New Pop Bumpers**** Post #594 in topic

    Posted 3 days ago by liorillusion – in All modding! ‐ Last reply today

    ****Production UPDATE**** We just finish the production of the drums, pop up heads and Mando buttons. we are now waiting just for the packing. from now, most of ...

  • MO

    JJP The Hobbit - sculpted mods by THE ART OF PINBALL ****NEW CREATION**** Post #190 in topic

    Posted 3 days ago by liorillusion – in All modding! ‐ Last reply 3 days ago

    ****Production UPDATE**** We just finish the production of the drums, pop up heads and Mando buttons. we are now waiting just for the packing. from now, most of ...

  • O/T

    Official NFL Thread Post #35346 in topic

    Posted 4 days ago by JohnnyPinball007 – in Generally off-topic ‐ Last reply today

    Hey guys the History channel is airing "The History Of Pinball tonight at 10p Here it was about 20 minutes of play dough, 15 minutes of pinball, and 10 minutes of slinky at 10pm on the history channel. Did you get a whole 1 hour show about pinball in your TV market? Thanks for the heads up, it was still interesting!

  • ALL

    2021 Pinside Black Friday Sales Summary Post #177 in topic

    Posted 5 days ago by bobwiley – in All Pinball ‐ Last reply yesterday

    Yeah, heads up to every seller who participated, I purchased wayyyy more than I would have had there not been a ...

  • MO

    ***NEW*** PIN STADIUM Wifi Pinball Mods & Pinball LED Lights Announcement!!! Post #7157 in topic

    Posted 5 days ago by pinstadium – in All modding! ‐ Last reply today

    ... this is the LAST sale for a VERY LONG time!! If you are thinking of picking up some of our products, NOW is the time. Click here to order: https://pinstadium.com ... the following secret Discount Code: BF21 — Scott Pin Stadium www.pinstadium.com [quoted image] Just a heads up less than 48 hours left on this OR while inventory permits which could be the ...

  • CLB

    High Speed Club ~ Dispatch, this is 504. We have a Club now, over. Post #4981 in topic

    Posted 6 days ago by KnockerPTSD – in All clubs (...members only!) ‐ Last reply 6 days ago

    I ended up filing the opening and I'm ordering some new mechs. I don't have a printer anyway so I need to find the little coin reject insert for $1 and I need some apron cards before it heads out to its temporary home [att=6626150,2651157 caption=""]

  • CLB

    Black Knight - Sword of Rage Club - Honourable Knights Only Post #4458 in topic

    Posted 7 days ago by NoQuarters – in All clubs (...members only!) ‐ Last reply today

    Thanks for the heads up on possible issues with the LZ code also. I am going to hold off updating my ...

  • CLB

    Viper Night Drivin: now it is a club! Post #257 in topic

    Posted 7 days ago by V8haha – in All clubs (...members only!) ‐ Last reply 4 days ago

    ... anything cool? If not, I can't imagine it should be doing it. Cool thanks for the heads up! I don’t think it registers anything cool but it happens to fast i really can’t tell Can ...

  • CLB

    Official TRON lovefest thread, I love it more than lamp! Post #10574 in topic

    Posted 8 days ago by Lemank – in All clubs (...members only!) ‐ Last reply today

    ... trouble again in the future: https://www.ulekstore.com/09_Triangle_Protector_Piece_for_TRON_p/triangle_protset_tron.htm Thanks for the heads up. I should get a set of new plastics for it anyways. It will be nice to have ...

  • CLB

    Up the Irons - Stern Iron Maiden Owners and True Fans Club! Post #10231 in topic

    Posted 8 days ago by mbwalker – in All clubs (...members only!) ‐ Last reply today

    Your wireform is bent. Pay particular attention to the area in red. [quoted image][quoted image] It might even be the right side, up by the bend. The ball heads to the left side on the way down. Wonder if the rail is tilted side-to-side? [att=6622889,2649123 caption=""] [att=6622889,2649118 caption=""]

  • ALL

    2021 Pinside Black Friday Sales Summary Post #76 in topic

    Posted 9 days ago by ralphwiggum – in All Pinball ‐ Last reply yesterday

    Sale is NOT applicable for playfield posts, photography/decor, or other misc. mods. Use of the code for these items will result in order cancellation (for orders containing only invalid items) or partial refunds (for orders with both valid and invalid items). Just a quick heads up.... Not sure if you are aware, but you can modify each item in your shop to accept coupon codes. This would allow you to have mixed orders in case people want discounted items and full priced items together.

  • STN

    Led Zeppelin Owners Thread Post #6684 in topic

    Posted 9 days ago by John-Floyd – in Stern Pinball ‐ Last reply yesterday

    Just confirmed...it's not just you. They ruined EM Multiball. Sure, the lights are cooler now, but at the expense of functionality. I sure hope this is just a bug that they go back and fix, and not intended operation, because it sucks big time. No more knocking the ball off the magnet. No more 4 ball. Went from one of the most fun and unique multiball set-ups to just another generic mode. Super lame. Thanks for the heads up - glad my update failed. Definitely not going with this new shit show.

  • O/T

    Well, I Guess I Won’t Be Buying Any Machines For Awhile… Post #193 in topic

    Posted 10 days ago by whthrs166 – in Serious section ‐ Last reply yesterday

    ... engine build. I have forgot how much work, the torqueing, moving the engine around, picking up crankshafts, picking up heads ect... actually is required. The Big Hurt is coming with pulling the engine and ... detailing the engine compartment. I will post up plenty of pics so you guys can bleed with ...

  • RSD

    Medusa playfield swap Post #115 in topic

    Posted 10 days ago by wrd1972 – in Restorations documented ‐ Last reply 6 days ago

    ... chemical resistant. Its so durable that when I screw up the screen-pritning of art on the back of WPC heads, I can wipe the messed-up paint off with thinner, and the thinner wont ...

  • STN

    IFPA Stern Rewards - Get a discounted NIB Stern direct from Stern Post #61 in topic

    Posted 10 days ago by ifpapinball – in Stern Pinball ‐ Last reply 10 days ago

    Any word on Stern offering any other titles before the end of the year ? Nothing at the moment, although they don't really give me a heads up long in advance of when they want something added to the program.

  • O/T

    Favorite childhood toys and youthful memories Post #6692 in topic

    Posted 10 days ago by bingopodcast – in Hobbies without flippers ‐ Last reply yesterday

    ... different jobs needed, this is a tool I really only wanted to use when building up or tearing down a print: https://flic.kr/p/cdR9AL The splicer was a fancy hole ... archival. No 35mm prints can be 'built up' into larger reels, having the heads and tails removed. I loved lugging those film canisters up to the booth on the fourth (or fifth ... ?!) floor, building up the prints, and just the ...

  • STN

    Stern Godzilla Official Owners Club King Elwin Post #3289 in topic

    Posted 10 days ago by coloradodan – in Stern Pinball ‐ Last reply today

    Looks like I'm #57 on my distributor's waitlist and even a march delivery isn't guaranteed now. Ugg. If anyone has a heads up on spring premium inventory please PM me. In the meantime I will just remain jelly. :)

  • O/T

    Stock Market Traders? Post #15425 in topic

    Posted 12 days ago by NicoVolta – in Generally off-topic ‐ Last reply today

    ... every pocket. So... we are still awaiting our i-Vision glasses to give the metaverse the heads-up display it needs to truly explode. Google Glasses and the Snapchat Spectacles have thus far ...

  • ALL

    When your Pin Room has been violated Post #54 in topic

    Posted 12 days ago by MK6PIN – in All Pinball ‐ Last reply 12 days ago

    Heads up....Son in Law showing up this weekend...I have a plan.... 8)

  • HGR

    Super Chexx bubble hockey unofficial thread Post #2756 in topic

    Posted 13 days ago by MLmotorsport – in All gameroom talk ‐ Last reply today

    Love these custom nets, looks so much better![quoted image][quoted image] Thanks for the heads up on these. Best $99 (shipped) I've spent on a mod in a while ..and to my door from Canada in 4 days. Simple drop-in replacement for the goals. Better quality than the originals and nice improvement to the look! [att=6615061,2642819 caption=""]

  • STN

    Pinball machines that give the best booming bass and rumble Post #53 in topic

    Posted 13 days ago by Jamesays – in Stern Pinball ‐ Last reply 4 days ago

    ... ://PinWoofer.com [email protected] +1 208-855-0346, 9am - 5pm MST, Mon - Fri As a possible heads up If you have Pinwoofers setup its not compatible with the pinnovators bass hookup,Pinwoofer offers ... a solution for this to hook up your external sub,I dont have that yet but do enjoy Pinwoofers setup on Met,LZ ...

  • STN

    Stern Godzilla Official Owners Club King Elwin Post #2987 in topic

    Posted 14 days ago by blueberryjohnson – in Stern Pinball ‐ Last reply today

    ... of a live catch. Now it rattles most of the time and often fails to get up and around. Week one, I can regularly hit the upper loop six times in a row, sometimes ... after the third or fourth shot instead of having an upward trajectory the ball weakly heads down to the right

  • PFS

    Gottlieb Genie Playfield Post #2 in topic

    Posted 15 days ago by play_pinball – in Pinball parts for sale ‐ Last reply 15 days ago

    Heads up, this is a #genie playfield not Circus. :**:

  • O/T

    The Bourbon Loner Post #175 in topic

    Posted 15 days ago by Green-Machine – in Generally off-topic ‐ Last reply 3 days ago

    Not crazy about this bottle, not bad but not memorable enough [quoted image] I see this bottle a lot. Always catches my attention but never purchased. Thanks for the heads up!

  • O/T

    Pinside Vinyl Club Post #7143 in topic

    Posted 16 days ago by gonzo73 – in Sights and sounds ‐ Last reply today

    Another heads up freeks... Big News. Mobile Fidelity is going to press the first 6 David Lee Roth Van Halen albums next year. Save up some cash, its gonna get expensive.

  • O/T

    The official Coronavirus containment thread Post #27066 in topic

    Posted 16 days ago by JohnnyPinball007 – in Serious section ‐ Last reply today

    ... or something? Anyway, one day of feeling very bad is a whole lot better than ending up in the hospital on a ventilator. And for whatever reason some here are downvote happy, well ... J&J formula changed, because I felt like I was having some minor shellfish reactions to it now). (just a heads up to plan on taking it easy for 24 hours after the booster). But for sure ...

  • STN

    Stern Godzilla Official Owners Club King Elwin Post #2749 in topic

    Posted 16 days ago by MT45 – in Stern Pinball ‐ Last reply today

    ... showing mean deviations close to 0° and little variance while other devices show mean inaccuracies of up to 2°, on some occasions reaching over 6° compared to the objective tilt. The deviations are higher ... link » I bought this one based on your recommendation... it's on the way now! Thx for heads up

  • CLB

    Pre-War Club! 1930 - 1939 Post #170 in topic

    Posted 16 days ago by cait001 – in All clubs (...members only!) ‐ Last reply 2 days ago

    ... it? If so, please post here. I’d love to see it in action. thanks for the heads-up! I love watching people spend their money on crazy shit :) Here are links to each day ...

  • O/T

    Stock Market Traders? Post #15368 in topic

    Posted 16 days ago by Rdoyle1978 – in Generally off-topic ‐ Last reply today

    I went big on DIS a couple weeks ago because their profits were up, but then it took a crap because the market was only looking at subscriber numbers for Disney+, which were slowing. Sure hope it heads back northward, even if it takes a year

  • POD

    *NEW* TPN: Triple Drain Pinball Podcast Ep 10: We Couldn't Get Neil, So... Post #2743 in topic

    Posted 16 days ago by davidlldennis – in Podcasts and video streams ‐ Last reply today

    Just a heads up. Zach has the flu... Negative COVID test but he's wiped out

  • ALL

    Pinball Basement crickets Post #3 in topic

    Posted 17 days ago by gac – in All Pinball ‐ Last reply 10 days ago

    Thanks for the heads up ForceFlow. Disappointing to say the least.

  • MO

    New Mod: TRON Interactive Backboard Display Post #101 in topic

    Posted 17 days ago by Compy – in All modding! ‐ Last reply 5 days ago

    ... past weekend. Jordan and Becca, thank you so much. The test unit is now set up here for testing the initial units before they go out to you. 3. Plastics - We upgraded ... so much as a glare just by shooting me an email. We'll honor those right up to the point where we assemble and ship your unit! Then of course, we'll ... a return of course!). Sorry for the delay in updates, we've been heads down getting this thing polished up for recent shows. My phone number is also on the website, so feel ...

  • CLB

    ROBOCOP Club if you own one or use to Post #1546 in topic

    Posted 17 days ago by dscapo – in All clubs (...members only!) ‐ Last reply today

    There is something on one of Todd Tuckey's youtube videos where he talks of replacing several items on the PPB board, I think. Something from the factory was showing defective and burned those inserts. Ok. Appreciate the heads up

  • MO

    Fish Tank topper; could we make this happen? Post #14 in topic

    Posted 17 days ago by McDoom – in All modding! ‐ Last reply 4 days ago

    More im in the process of doing this, just trying to get a couple of good zombie heads off eBay. I would love to see what you come up with. Have you started yet? I thought of making a tank out of plastic sheets. I wonder if it's possible to 3D print some decent size/looking heads. (I don't have a 3D printer and never used one, but I would be willing to get one for this project) I see some excellent Ideas posted here. Feel free to chime in if you have experience with this type of thing.

  • ALL

    I am sorry, but this is getting out of hand........ Post #43 in topic

    Posted 17 days ago by vdojaq – in All Pinball ‐ Last reply 13 days ago

    ... NEEDS a pinball machine, it's a want, a desire. We all need vehicles/transportation and a roof over our heads, money to pay for food and our lively hoods. None of which includes owning a pinball ... be sustained until the operators say no more? The price per play has to go up with the increase of costs. Are people going to be inclined to drop $2 bucks for ...

  • PFR

    EZ question for Diner owner Post #1 in topic

    Posted 18 days ago by Seamlesswall – in Playfield restoration ‐ Last reply 18 days ago

    ... there. As it is now after he ball ejects from the skill shot, it immediately heads for the flippers. A mangled wireworm was found in the cabinet. If it is a wireworm any ... idea which one? I see a couple of candidates 12-6902 or 12-6904 but nothing comes up on Marco.

  • MO

    Nine Ball software rewrite Post #55 in topic

    Posted 18 days ago by pins4life33 – in All modding! ‐ Last reply 6 days ago

    Damn was hoping this was an update for multiball multiplier rules . Thanks for the heads up the beta works great no issues on it since we have had hundred of competitive games on it. http://tsqmadness.com/slochar/ZIP/ nineball-beta.zip is the latest version. Hasn't been changed at all since this thread went comatose, but the links to google sites are all dead now thanks to Google sites removing the .zip's.

  • O/T

    Quarantine cooking thread Post #2239 in topic

    Posted 18 days ago by golfingdad1 – in Generally off-topic ‐ Last reply today

    Careful, this looks like a scam. Google Blackstone-outlet scam. I wouldnt trust them. Really ....hmmm, thanks for the heads up. It does look to good ....

  • CLB

    Black Knight - Sword of Rage Club - Honourable Knights Only Post #4386 in topic

    Posted 19 days ago by Jparks – in All clubs (...members only!) ‐ Last reply today

    Shooter knob back in stock at Marcos. https://www.marcospecialties.com/pinball-parts/502-7094-00 Hoping toppers come back in stock lol. Thanks for the heads up I've been looking for one of these for awhile

  • O/T

    Pinside Vinyl Club Post #7141 in topic

    Posted 19 days ago by gonzo73 – in Sights and sounds ‐ Last reply today

    Just saw this, so here's a heads up.. Killing Joke ST, 2003, 2Lp Purple Vinyl, is available for Preorder. Shipping in December. This ...

  • RFS

    Official California For Sale Club (and Wanted too) Post #10736 in topic

    Posted 20 days ago by Llabnip1972 – in Regional for sale threads ‐ Last reply today

    Hey there everyone! Pin Wagon update. It's been one month since I picked up the reigns of the Pin Wagon and it has been a blast. Started off moving a candy ... cab across the bay. Followed that up with 3 trips down south and a stop in Sac. That was awesome because I was able to ... . I'm booked til after Thanksgiving but let me know if you need anything after that. Just a heads up. I will be less likely to take jobs north and east of CA until springtime. I don ...

  • CLB

    Nor Cal Pinheads thread Post #7156 in topic

    Posted 20 days ago by Llabnip1972 – in All clubs (...members only!) ‐ Last reply today

    Hey there everyone! Pin Wagon update. It's been one month since I picked up the reigns of the Pin Wagon and it has been a blast. Started off moving a candy ... cab across the bay. Followed that up with 3 trips down south and a stop in Sac. That was awesome because I was able to ... . I'm booked til after Thanksgiving but let me know if you need anything after that. Just a heads up. I will be less likely to take jobs north and east of CA until springtime. I don ...

  • EMA

    Midway White Lightning restoration/retrofit! Post #30 in topic

    Posted 20 days ago by ZooDude – in EM Arcade Games ‐ Last reply 19 days ago

    Heads up to everyone that those 1/2" balls from China do not work in white lightning! Working on ... I removed all the old, dirty nicked balls, put in all new and instantly jammed everything up, had to fully remove the gun, disassemble, remove stuck balls, total hassle. Ended ... up using the old balls and it worked fine. Still have some slippage on the score ...

  • CLB

    I like those odds - The Mandalorian Owners Club Post #2554 in topic

    Posted 21 days ago by Belvedere – in All clubs (...members only!) ‐ Last reply today

    ... the steps required with removing the mini playfield? [quoted image] You can see 2 nut/screw heads on either side of the top side of the playfield on black stand posts. Just ... goes through the playfield. 2 wire cable connections, separate at the connection under the playfield. Lift up the mini playfield and it comes out

  • PMW

    Wanted: Cactus Canyon (Remake - LE) CCRLE AT MSRP!! Post #52 in topic

    Posted 22 days ago by mrclean – in Pinball machines wanted ‐ Last reply 16 days ago

    One listed for 3k markup. Get it while its hot! Appreciate the heads up, but no thank you. Still looking for one at MSRP. If everyone else on pinside marketplace & other platforms had the same mentality the drastically increased “flipping” prices would subside. A lot can happen in 6 - 12 months, which is how long it will take CGC to deliver all the LE's You are right, in that timeframe we could see another 4-6 other new titles from various other manufacturers.

  • TDM

    TOM J120 connector help Post #6 in topic

    Posted 22 days ago by phishrace – in Tech: DMD era games ‐ Last reply 20 days ago

    The two green wires on J121 pins 1 and 2 don't match the manual. Follow those wires to see what's going on there. By the manual, you currently have female connector J121 attached to male connector J120 and vice versa. Ok because the connectors are wired in parallel, but heads up for when you get started. Do one pin at a time and you hopefully won't need the manual.

  • CGC

    CCr ~ Cactus Canyon Remake Hype Thread ~ Lock is lit.. and so am I! Post #3757 in topic

    Posted 22 days ago by Lamberger – in Chicago Gaming ‐ Last reply today

    The playfield is peeling up? Or the cabinet? I've heard of cabinet issues on some of their first games, but I would expect that they've figured that out with their later games. Playfield.. I haven't heard that or looked at the cab. Thanks for the heads up!

  • RFS

    Official California For Sale Club (and Wanted too) Post #10725 in topic

    Posted 24 days ago by doomid – in Regional for sale threads ‐ Last reply today

    Just setup Godzilla LE at our Van Nuys AYCE Gogi location. Heads up Launch party is Dec 11. Signup is at ontiltpinball.com Thank you ~Shane

  • STN

    Godzilla vs. Mandalorian Post #47 in topic

    Posted 24 days ago by NashtyFunk – in Stern Pinball ‐ Last reply 13 days ago

    I have the LE of both, and I love Mando, but it's not Godzilla. Zilla wins that contest heads up every time.

  • CGC

    CCr ~ Cactus Canyon Remake Hype Thread ~ Lock is lit.. and so am I! Post #3419 in topic

    Posted 25 days ago by JoeHog – in Chicago Gaming ‐ Last reply today

    ... got in on the LE. Can't wait and hope everyone gets what they want. Just a heads up for those that don't buy every game that comes out.

  • O/T

    Any other Survivor fans out there? Post #329 in topic

    Posted 25 days ago by RTS – in Generally off-topic ‐ Last reply 25 days ago

    ... show is on its way out. The cast is not helping. They're mostly douche heads that I can't get behind. And Probst is like the douche leader. He needs to be ... less front and center, and shut up a bit with his commentary and influence. I can't stand watching any of those singing shows however ...

  • EV

    Official Unofficial 2021 MGC Thread Post #75 in topic

    Posted 26 days ago by pinpin8990 – in Events ‐ Last reply 19 days ago

    ... many streets being blocked because of a parade. A heads up would have been nice when I ordered my ticket online. We ended up parking at the hotel across the street, but we ... like a dream. Color screen is amazing. Another hit for CGC. Never even looked up at the animated topper, so I'm thinking the standard edition will do just fine. Halloween ... /Ultra Man - upper playfield(s) take up way too much real estate. Not sure why everyone gets so excited for Spooky games ...

  • CLB

    Stern STAR WARS club...May The Force Be With You Post #11650 in topic

    Posted 28 days ago by Hoochoo – in All clubs (...members only!) ‐ Last reply today

    So I learned the hard way tonight about the automatic reset high scores feature. Every high score other than my GC is now deleted, days after I finally beat the jedi multiball high score. It was set to delete scores automatically after 2000 plays. Default setting! Fair warning to anyone else that didn't know that yet! I didn't know about that option. Might have been included in the new code, thanks for the heads up. I just set it to OFF, all good.

  • MO

    “Wolffcub’s” Ghostbusters Firehouse, City, Library, Trap, PKE Mods Post #86 in topic

    Posted 28 days ago by Norcalpin – in All modding! ‐ Last reply 5 days ago

    Hey wolf, Could you give me a heads up as to when you send the invoice? I want to make sure I don't miss it. Thanks

  • BOO

    ~ULTRABAD~ Post #2441 in topic

    Posted 29 days ago by c818919taylor – in Spooky Pinball ‐ Last reply 7 days ago

    ... turns out to be a patient shooter. Lots of precise shooting. Cant help but think the heads up needs to be reduced and the campy 4x3 aspect should be bigger or a more layered ...

  • CLB

    JJP Pirates of the Caribbean Official Owners and Fan Club! Post #17187 in topic

    Posted 29 days ago by dnaman – in All clubs (...members only!) ‐ Last reply today

    IT HAPPENED!!! A new release is imminent!! It was just a matter of time. ;) Thanks for the heads up!

  • CLB

    JJP Pirates of the Caribbean Official Owners and Fan Club! Post #17182 in topic

    Posted 29 days ago by pinballj – in All clubs (...members only!) ‐ Last reply today

    IT HAPPENED!!! A new release is imminent!! Really!? Where did you see that? I can’t wait to explore this game all over again! Holy crap! Just checked telegram (beta sign up)! Thanks @rdoyle1978 for the heads up!

  • STN

    Stern Godzilla Official Owners Club King Elwin Post #1532 in topic

    Posted 29 days ago by VALIS666 – in Stern Pinball ‐ Last reply today

    ... wait! Same here. I'm rescheduling my work now to have Friday afternoon off to pick up, set up, and play the shit out of it. I look forward to every new pin that ... comes through the door but I'm especially stoked for this one. Speaking of picking up, I assume there's no harm in putting boxed pins on their backs? The "truck this ... in box trucks, but I don't remember anything about them that would make this an issue. Heads are strapped down, balls and loose hardware are in the coinbox which is pinned to ...

  • EV

    Disappointed Chicago Expo Post #162 in topic

    Posted 29 days ago by dmarston – in Events ‐ Last reply 9 days ago

    ... when you go North on Meacham, unless you drive up to Palatine. Southward on Meacham looked promising. There is a free shuttle bus that heads South on Friday-Saturday-Sunday. https://www.pacebus ...

  • O/T

    Stock Market Traders? Post #15247 in topic

    Posted 30 days ago by NicoVolta – in Generally off-topic ‐ Last reply today

    ... dialup modems. Then broadband. Then smartphones. Next, the glasses and AR navigation. Everyone will have a heads-up display. No telling if FB or some other entity will rule this space... but it ...

  • MO

    ***NEW*** PIN STADIUM Wifi Pinball Mods & Pinball LED Lights Announcement!!! Post #7101 in topic

    Posted 30 days ago by pinstadium – in All modding! ‐ Last reply today

    ... show it’s been extremely busy since the Neos were witnessed in person. Just a heads up and until I get caught up the wait could get longer. Just depends on how fast I can move. Waiting ... definitely will not speed it up if you know what I’m saying. I will process the orders in the order they were received ...

  • CLB

    Nor Cal Pinheads thread Post #7136 in topic

    Posted 30 days ago by shovelhed – in All clubs (...members only!) ‐ Last reply today

    I have a wanted ad looking to purchase a totan. Ive been sent several emails to “Take your shit down ”. Instead of engaging with this slime ball I figured I would just give folks a heads up about him.

  • CLB

    JJP Pirates of the Caribbean Official Owners and Fan Club! Post #17179 in topic

    Posted 30 days ago by javagrind888 – in All clubs (...members only!) ‐ Last reply today

    ... careful. Also, to install the mod, the main star map circuit board is pressed right up against the wood, without a spacer. I just didn’t like this very much. It’s a nice mod though ... set your expectations thusly! And IMO don’t bother with the extra lights Thanks for the heads up. I watched the install video and pretty quickly changed my mind on it. Still looking for ...

  • O/T

    *SPOILERS* -TROS* Star Wars: TLJ is really bad & other Star Wars/Disney/Marvel Post #5346 in topic

    Posted 30 days ago by HoakyPoaky – in Generally off-topic ‐ Last reply 16 days ago

    ... at crime syndicates & the underworld of Star Wars lore. Jostling for power, backstabbing, straight up scum & villainy. Hopefully he will run into the remaining Hutts at some point of the ... series, or tie into Maul's Crimson Dawn syndicate that was set up in Solo. Should be interesting. Would be awesome to have Dengar, Zuckuss & 4-LOM ... to build his crime empire through reasoning at first. I'm sure he'll be cracking heads to gain control by the end. He certainly already came off as bad ass in ...

  • CGC

    CCr ~ Cactus Canyon Remake Hype Thread ~ Lock is lit.. and so am I! Post #2028 in topic

    Posted 31 days ago by Jj557 – in Chicago Gaming ‐ Last reply today

    ... should have favored repeat customers? Had an interest list? Send out a random email with no heads up? There was no solution that would appease the demand. People missing out in the LE ...

  • CLB

    Nor Cal Pinheads thread Post #7132 in topic

    Posted 31 days ago by trk12fire – in All clubs (...members only!) ‐ Last reply today

    Just a heads up the flipper John Tennler keeps sending me email responses to some craiglist ad’s I have telling me to take them down or else. He is a total class act. Beware potential buyers his ads are always from Oakland. Hopefully you never do business with him. He claims all his pins are huo but he’s a liar. Been caught way too many times. Harley D. Thanks for the heads up.

  • CLB

    Nor Cal Pinheads thread Post #7131 in topic

    Posted 31 days ago by shovelhed – in All clubs (...members only!) ‐ Last reply today

    Just a heads up the flipper John Tennler keeps sending me email responses to some craiglist ad’s I have telling me to take them down or else. He is a total class act. Beware potential buyers his ads are always from Oakland. Hopefully you never do business with him. He claims all his pins are huo but he’s a liar. Been caught way too many times. Harley D.

  • ALL

    Pinball expo etiquette Post #107 in topic

    Posted 31 days ago by nsduprr – in All Pinball ‐ Last reply 14 days ago

    ... the parking lot…something about a blown down *easy up* canopy and a scratched truck… rumors have it that apologies were made and cooler heads prevailed. Not knocking Expo or any other show, just ...

  • MO

    The Mandalorian: Grogu Modding Thread Post #194 in topic

    Posted 31 days ago by Lermods – in All modding! ‐ Last reply 9 days ago

    Lermods Any idea when the full Grogu kit might be back in stock? Error on our website, they are in stock now, sorry and thanks for the heads up. https://lermods.com/shop/ols/products/the-mandalorian-animated-interactive-grogu

  • RFS

    Northeast US For Sale Thread Post #22374 in topic

    Posted 32 days ago by TheBeefSupreme – in Regional for sale threads ‐ Last reply today

    If you decide your interested, I have a friend that is just about to list the Stern non VE version. Thanks for the heads up! I’m only currently interested in the VE. Ha the artwork makes a huge difference for me.

  • RSD

    Finding my Place in the Food Chain while Taking on the (Bally) Frontier Post #1102 in topic

    Posted 33 days ago by TractorDoc – in Restorations documented ‐ Last reply yesterday

    ... targets more to my liking. The original blue (bear/bobcat/wolf?) heads are nice and all, but I thought I'd mix it up a bit with some new target decals. I know the purists will disapprove ...

  • MO

    Pinball Brothers Alien Apron & Lighting Mod Post #215 in topic

    Posted 33 days ago by EightBallTexas – in All modding! ‐ Last reply yesterday

    ... ....So please DM me or Dave and let's see if we can out put our heads together. I have the schematics of what we need with a wish list of items and must ... called it, my day is getting better. LOL. Once we have a few responses I will set up a zoom call with all of us to walk thru it with designers.

  • TRA

    Pin Hauling Illinois to Mi or back sat Nov 6 Post #4 in topic

    Posted 34 days ago by psd4me – in Transportation questions ‐ Last reply 31 days ago

    Let pinsiders Froboz (Duncan) and/or Cfh (Clay) know as they are trying to get a pin from near Chicago to the VFW hall. Thanks for the heads up. I messaged Clay.

  • CLB

    CFTBL- Fans and members welcome!!! Post #4261 in topic

    Posted 34 days ago by FantasticPinball – in All clubs (...members only!) ‐ Last reply 2 days ago

    Just a heads up on the hologram. I have delayed this project based on some supply issues. I will step back and try again in a few months to see if they sort things out.

  • BOU

    deeproot Pinball thread Post #26616 in topic

    Posted 34 days ago by blueberryjohnson – in Boutique pinball ‐ Last reply today

    Hat tip to yet another former deeproot employee for the heads up! [att=6575118,2614830 caption=""] Feels like character witnesses may be in short supply... https://www.expressnews.com/business/article/San-Antonio-investment-adviser-Mueller-fraud-16563274.php

  • STN

    Official Stern Godzilla hype thread Post #1446 in topic

    Posted 35 days ago by mpdpvdpin – in Stern Pinball ‐ Last reply 11 days ago

    Drilled a hole in back, put in jewelry wire and attached him to existing posts behind. Easy peasy, huge Godzilla to left of building, flying mothra and Ghidorahs three heads coming up out of the circular habitrails next 8) That sure looks great, perfect! How is it attached to plastic?

  • ALL

    The confessional Post #5031 in topic

    Posted 36 days ago by JohnnyPinball007 – in All Pinball ‐ Last reply today

    ... here for over 3 years before I even knew there was a basement here myself(Thanks for the heads up ForceFlow!). Friends were sending me funny stuff I wanted to share here, and I also wanted to ...

  • O/T

    People are flipping EVERYTHING! Post #191 in topic

    Posted 37 days ago by romulusx – in Generally off-topic ‐ Last reply 2 days ago

    ... Walmart for a few years before retirement. Workers like that should be commended. My grandmother grew up in an orphanage and raised 4 kids, one severely handicap, in a 900 square foot house on ... sweaty I take a second and look at my house and I'm grateful. I like to think of Talking Heads once in a lifetime.Is this my beautiful home?Is this my beautiful wife?Oh I'm grateful ...

  • STN

    Stern Godzilla Official Owners Club King Elwin Post #870 in topic

    Posted 37 days ago by RoyalJack – in Stern Pinball ‐ Last reply today

    I've just noticed this while I'm waiting for my LE. Where in the world is Ghidorah's body? I see all 3 heads wrapped up with Godzilla but...where is the rest of him? I can't unsee it. [att=6570434,2611872 caption=""]

  • ALL

    Alert! Stolen Pinball TMNT Post #5 in topic

    Posted 37 days ago by ChipScott – in All Pinball ‐ Last reply 20 days ago

    ... he calls "Russell moving." The both of them, to be honest, look like meth heads. The woman was somewhat unfit, 180 lb, brown shoulder length hair and had a ... , I would encourage anyone else who deals with an alternative transport company who shows up unequipped to adequately transport a pinball to stop the transaction right there and talk with ... not only to reiterate to myself, but to others....If anyone comes to pick up a pinball machine that is an unknown alternative transport, take pictures of the vehicle, ...

  • MO

    New software for Stern Seawitch Post #1 in topic

    Posted 38 days ago by slochar – in All modding! ‐ Last reply 18 days ago

    https://github.com/fatchit-idleman/seawitch/archive/refs/heads/main.zip Assuming this link works, new version of stern seawitch. Not many tweaks suggested ... score for consecutive loops (dip settable) Each successive loop up to 5 increases award 1st time 1x, 2nd 2x, 3rd 3x, etc. up to 5x. I've only been able to do it while ...

  • EM

    EM High Scores Post #93 in topic

    Posted 38 days ago by Mopar – in EM Pinball Hangout ‐ Last reply 4 days ago

    ... enjoyed reading your posts and seeing your seemingly endless string of amazing games getting set up! Thanks! I went through a string of woodrails, and now back on metal, but I'm going back to ... in the same Family's basement in the same spot for 59 years when I picked it up a couple weeks ago). It's in nice shape.. Next I believe will be a United Venus Target Shuffle ... , but that's another that's tough to flip as is all the other 4 digit AAB Wedge Heads..

  • EM

    EM High Scores Post #91 in topic

    Posted 38 days ago by Vic_Camp – in EM Pinball Hangout ‐ Last reply 4 days ago

    Just finished up my Skill Pool yearly maintenance and finally touched up the back glass after being in my collection 20+ years. Not my best high score but a decent one. Got to love them reverse wedge heads. [att=6567792,2610312 caption=""]

  • CLB

    Flash Gordon: Saviors of the Universe Club Post #1812 in topic

    Posted 39 days ago by bluebomber – in All clubs (...members only!) ‐ Last reply today

    Need help with power supply connections. Putting my game back together and I can't find the wire connectors that went to J3 and J4 of the power supply. Where do they come from? I feel like I'm loosing my mind. Brad [quoted image] There should be a 6x4 (24 pin) connector in the backbox at the lower right side that they connect to. You should see it right away, if not I can take a pic. Just a heads up since you have a new power board there, you may want to replace the connectors that plug into as well.

  • TDM

    WCS Violent playing game? Flippers, ball, and slingshots Post #3 in topic

    Posted 40 days ago by MoJake – in Tech: DMD era games ‐ Last reply 39 days ago

    You can’t post videos on Pinside, you should upload them on a video platform of your choice and link it here. Replace that destroyed post. Titans are bouncier than regular rubber. I usually use traditional rubber rings for my games. I put Titans in areas that need more bounce, like pop bumper nests. Well dang, after I spent so long learning how to make those .gifs Thanks for the heads up on the titan rubbers. I'll put the old ones back on and see what happens.

  • LCD

    Power issues, JPLE Post #1 in topic

    Posted 40 days ago by pingod – in Tech: LCD era games ‐ Last reply yesterday

    I have a JPLE on location. It has been not starting randomly lately. Games are all left on and turned off and on with a breaker. If I power cycle the switch it will turn on. What should I be looking for first. I'm no good with a tester either. Just a heads up on that. :-( I have a spare Power distribution board for a GOTLE, but not sure if they are interchangeable. Number is off by a couple of digits. Help @ltg

  • LOC

    Banning Pinball Museum to auction their collection Post #4612 in topic

    Posted 40 days ago by gonzo73 – in Locations to play ‐ Last reply 4 days ago

    ... the Squirrels. Then sit in the pine tree and shred em up. Then the Raccoons carry off the discarded Squirrels heads in the night. Ah the circle of life..... And a Banning photo ...

  • BOO

    ~ULTRABAD~ Post #2341 in topic

    Posted 41 days ago by Frax – in Spooky Pinball ‐ Last reply 7 days ago

    ... work that the vast majority will be unpaid, but nobody held a gun to their heads and said "DRAW!" (Ironically or not.) As far as being offensive to professional coders ... a GENERALIZATION. So what. If it offends them, then maybe they should stick up for their position by doing better, or convincing their employers that they need more ... educated statement towards them specifically. I know that I've seen people say that R&M ended up in a good place, and ACNC sorta-kinda-didn't...but I haven't researched any of ...

  • RFS

    Northeast US For Sale Thread Post #22249 in topic

    Posted 42 days ago by subruckus – in Regional for sale threads ‐ Last reply today

    This GTB Big Shot just came up for 350 on CL, would be great for a restore, just a heads up as I can't take a project like this: https://hudsonvalley.craigslist.org/for/d/poughkeepsie-pinball-gottlieb-big-shot/7397259290.html I'm thinking about this Capt Card, what would you say its worth? I'm hoping to get the guy down to 500 from 7, but am awaiting better pictures: https://longisland.craigslist.org/for/d/middle-island-1974-gottliebs-capt-card/7393067208.html

  • PPW

    Grand Lizard Prototype Backglass Post #3 in topic

    Posted 42 days ago by rockwell – in Pinball parts wanted ‐ Last reply 42 days ago

    I got mine from BGresto, took about 7 months to arrive. Very happy with it. -mof Appreciate the heads up. BGR seems the way to go, just thought I'd see if anyone had one they were itching to get rid of!

  • STN

    Stern Godzilla Official Owners Club King Elwin Post #561 in topic

    Posted 44 days ago by Chambahz – in Stern Pinball ‐ Last reply today

    ... has 2 balls locked in the tower and another player locks a ball, the tower lifts up so that the ball just continues to flow along the ramp. I thought that was really ... figuring out what to do using the Insider Connected app. Everything just lined up today. I woke up and checked email before the morning rituals and saw an email from my ... home. Only reason I'm explaining this is because I feel so fortunate not to have had a heads up on this one. I wouldn't have slept a wink last night. It's worth the wait fellas ...

  • PPW

    Looking for a Cabinet for Star Race or Circus Post #6 in topic

    Posted 44 days ago by Ken16 – in Pinball parts wanted ‐ Last reply 44 days ago

    Actually, I was able to edit the heading. Thanks for the heads up on that one.

Found 8,189 forum posts. Currently showing results page 1 of 82.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside