When ending a MarketPlace listing successfully, Pinsiders can invite user feedback from the other party. Marketplace feedback cannot be removed, but can be responded to by ChrisHibler.
New! It is now possible for any Pinsider to leave feedback, without an invite. There are some checks in place to avoid abuse and "fake" feedback.
“Thanks for all the board repairs chris and your helping others diagnose problems here on the forum.”
“Chris has done work on 3 of my power driver boards, they are all now working flawlessly thanks to him. I highly recommended him if you have board work that is needed. Also, super helpful in the forums too.”
“Chris has done a couple different board repairs for me. Done well, quickly, and with great communication.
“Chris did a awesome job on my WhiteWater CPU board.
Great communication and quality work.
Next time I need a board repaired, I will certainly be going to him again.”
ChrisHibler responded on 2020-02-17 20:16:46
“Thank you Mr. Beardsley...happy to help. :-)”
“Nothing but good here. Solid work, good communication and a pleasure to deal with.. plus he did my board work through the holidays! 5 star service!”
“Had Chris work on my boards and he did a fantastic job on repairs, neat clean, very nice work. Chris also put in some ground pins so that I had clean neat ground mods. Will not hesitate to send Chris any of my boards in the future.
“Chris is the Pinball Wizard of troubleshooting and repairing all things pinball. I would highly recommend him to anyone. He kept me updated throughout the entire repair process, took great care of my board, and got me up and running in no time at all!”
“Chris well exceeded expectations. Great communication throughout the process! Got my boards back way ahead of the initial time frame and booted up immediately with no issues. Will use Chris for all future board repairs!”
“THE best at board repair!”
“Chris helped me get my beautiful new (to me!) NBA Fastbreak running like new. Amazing knowledge and a pleasure to work with. After looking into everything I knew to do, he helped me with my boards which I could have never figured out myself. Thanks again Chris!
I was having trouble with a Hyperball machine so Chris recommended I send him all 3 boards. He cleaned them up and replaced parts and shipped them back. The boards were fixed perfect, but I realized my machine had some other bugs beyond the board. Chris and I exchanged over 30 emails with excellent descriptions on his end of what to check and how» Read moreto test. I had little knowledge of the parts of the boards and he explained them and made it easy for me to understand how they work. He was very patient with me as we worked through it and ended up getting the machine to work perfect. Chris is an outstanding guy who offered service after the sale that is just about impossible to find today. I would never hesitate to send Chris more boards for repair. Absolutely top notch, I could not be happier. Thanks so much Chris!
“I reached out to Chris about helping repair a board. He took the time to give solid advice and I discovered it wasn't the board at all. With his guidance, I was able to make the repair and everything works great. Chris is incredibly knowledgeable and selflessly shares that knowledge. A true credit to the hobby.”
“Quality speedy work! Chris repaired the board from mt SST quickly, perfectly, and reasonably. From today forward he gets ANY and ALL board work I may encounter. Highly recommended!”
“Amazing work, truly a benefit to the Pinball community. He went above and beyond to help me out with my Jacks to Open. Meticulous detailed work, well documented and I only wish he lived closer!”
“All I can say is awesome... I sent him a hard to find sound board and he modified it and tested it. Could not be happier, excellent service. Thank you.”
“Chris has always gone above and beyond to help correct some seriously damaged boards for me. They come back working flawless, looking great, and often with additional improvements. He's a great resource to the pinball community and the man to turn to when you want to keep the original board and bring it back to life.”
“Chris helped me out with a previously-"repaired" WPC95 A/V board and got my AFM up and running for a reasonable fee. Highly recommend him and his advice!”
“I think Chris' reputation precedes the Pinside reputation system, but he fixed a messed up WPC power board for me nicely and had plenty of advice about the problem before and after the work. Great guy.”