Ive got a MET pro. It was hooked up by alligator clips for a little bit of time to the woofer to an external sub.
Out of the blue the audio kind of dies, it goes from a loud setting to very low. Sometimes the game is on audio level 42-44 but normally on 36-38. Did a speaker die, is the board dying, or something else?
A couple of Times I heard this on the song Blackened with the same sub/alligator clips. I checked my connections and reclipped them they seemed fine but I haven't had a problem since. My volume is usually 45, but as high as 55
Cable is coming loose connected to the CPU. I reseated the audio cable and the issue went away. I was not the only one nor are you to have this exact problem. Easy fix - can't promise but I think I reseated the ribbon cable just for fun.
Quoted from coz6:Cable is coming loose connected to the CPU. I reseated the audio cable and the issue went away
exact same issue I had and this corrected it.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-metallica-sound-issue and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Louisville, KY