Pinbot
Williams, 1986Hello, can anyone help me with a part # or description of the post located just to the
left side of the visor on Pinbot? It is not referenced in the manual and mine is
broken. One of the 5 yellow bumper sleeves sits on this post and the
top of the post must be flat as it sits under the tip of the largest
plastic. Any help would be greatly appreciated. Thanks and Happy New
Year!
This should be what you need.
http://www.marcospecialties.com/pinball-parts/02-4195
Some discussion on this: http://pinside.com/pinball/forum/topic/pinbot-what-piece-goes-here
There was also a thread on how to prevent it from breaking again. changing the washer and nut that go on the bottom of the playfield.
In viewing the previous discussion it almost looks like the mini pin was the original design or perhaps a protoype machine was photographed for the flyer? I can see where a mini pin would probably not fair well against direct ball strikes. In addition, all of the rubber ring sets I've seen have 5 of the yellow post bumpers included. I think this one appears to be exactly correct as the base of the pin is much more substantial and will support the yellow bumper: http://www.marcospecialties.com/control/keywordsearch?SEARCH_STRING=02-4659-1
Thanks a bunch for the help guys!!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinbot-need-help-identifying-part and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Indianapolis, IN