More pictures here: http://www.aaarpinball.com/

Don't tink I am going to be much help. I had the same problem when I got mine and I found a part at Marco that was the wrong part number but it said it would work. It did, the problem is my history doesn't go back that far and I can't tell you the part number.

This one looks like it but I can't gurantee that it is the same part I bought.

http://www.marcospecialties.com/pinball-parts/04-10080

I just cut a piece of plastic to go from the cam to the bar on the R2 head.

I had the motor so I didn't need it, I was just missing the cam and the arm. I can check mine and see if it has any numbers on it but it does look eactly like the one on the death star motor.

I just looked and yes it is the same cap as the death start. It has CM/1M/E/500V on it, the only thing I recognize is 500 Volts not sure what the other stuff is but the death start has the same thing on it.

Do you have the manual? The part number should be in there. But, the one from Marco looks like it should work (or you should be able to make it work). Good luck!

HI ,

i just got Star wars pinball

and i got the same probleme

R2D2 is empty !!

so what i need realy ?

http://www.marcospecialties.com/pinball-parts/04-10080
+
http://www.marcospecialties.com/pinball-parts/041-5019-00
+
CM/1M/E/500V

what about the 2 arms ?

Star_Wars_Pinball 023.jpg

thx a lot for info
+

Marcus,

I had the little arm attached to the post so I never tried to track one down. I was missing the big piece that links the two of them together and could not find one anywhere. What I wound up doing was using a little piece of plexi glass and cutting it with a dremel tool and then drilling out the two holes.

I have no idea if the head still moves like it did with the correct piece but it does move around so I figured good enough.

That wont work for the little one attached to the post I will try to do a little looking and see If I can find one any where, but you have probably already looked at the common places and if you didn't find one you may be out of luck. I'll let you know what I can find, there was a place over seas that had a few star wars parts and they may have something.

I did find this.

http://www.marcospecialties.com/pinball-parts/515-5202-00

I have no idea if it's the part or not as there is no picture associated with it but it's called a cam with two studs so it might be it. It's the only part number in the manual that looked like it may be referencing the part your looking for. That's the only thing I could find.

thx you a lot ,

another question can you tel me what RPM got the R2D2 motor ?

i found http://www.marcospecialties.com/pinball-parts/B-11571-3

20 $ less thant the R2D2 motor , and i seen be the exactly same.

No I have no idea what rpm it runs at.

Did you end up buying this motor? I need a new motor and they seem hard to come by...additionally, anyone know where to get the R2 dome 'chromed'?

Thanks