Attack from Mars
Bally, 1995
Medieval Madness
Williams, 1997
Monster Bash
Williams, 1998Hello pinsiders,another great product from www.head-shots.ca
They are not on the website yet,here is a first look 
Here is a pic of the Afm version installed.
MM not installed.
image-62.jpgimage-240.jpgimage-515.jpgimage-968.jpgimage.jpg
Hey guys, Those are our buttons (Thanks Pingod), Wife (Brenda) sculpts and paints them all by hand. Just waiting for a few parts and they will be available. Games available at this point, or as soon as we get the parts, will be: AFM, MM, MB, NF, Flintstones, BSD, DM, CP. Not 100% sure yet, but I think $40.00, complete assemblies. They will be available in her ETSY shop Pinballshooters https://www.etsy.com/shop/PinballShooters , Lots of other stuff there... or send me a PM. Here are some Pics.
a dis bram red.jpg
a dis bram yellow.jpg
a dis demo.jpg
a dis flint.jpg
BU ON001C.jpg
BU ON002A.jpg
BU ON002D.jpg
BU ON002C.jpg
BU ON003.jpg
BU ON003C.jpg
a dis champ eye 1.jpg
a dis champ eye 2.jpg
a dis no fear.jpgI didn't even realize they were sculpted, looked like a picture inside the assembly at first. So, is there a clear plastic cover, or do you feel the texture when you touch it? It is hard to tell by pics. Props to wifey- these look awesome
Quoted from yzfguy:I didn't even realize they were sculpted, looked like a picture inside the assembly at first. So, is there a clear plastic cover, or do you feel the texture when you touch it? It is hard to tell by pics. Props to wifey- these look awesome
Yes, the sculpted part is basically the part of the button that says "Launch Ball", which I might add was broken on the 3 games I put them on here, MB, MM and AFM. So, not only do they look cool, but replace the often broken part of the button.
Sculpt is under a Clear lens, so the look great. Let me see if I have a pic where you can see the sculpt a little better.
Thanks, Dave
aBU ON001AA MARS.jpg
aBU ON001AB MARS.jpgLove it, thanks for the pic. Just a few nights ago, my buddy noticed that I have custom shooter rods on most games and that launch button is so ho-hum.
Quoted from yzfguy:Love it, thanks for the pic. Just a few nights ago, my buddy noticed that I have custom shooter rods on most games and that launch button is so ho-hum.
We do Tons of Shooter Rods too... 
Parts are all in and put together for these Buttons. Complete assemblies, $40.00 each. PM me here, or check them all out (as well as a lot of other stuff) at https://www.etsy.com/shop/PinballShooters
Popeye isn't up yet, or the second one for Champion Pub CP, I can send you pics if you like, but they will get up there soon.
Thanks, Dave and Brenda
Quoted from RussMyers:Can you do a TARDIS and/or DALEK one for Doctor Who?
Popeye would be fun too.
RussMyers
Dalek is there for Doctor Who as well!! Popeye Pics coming soon.
Quoted from PinsOnly:Parts are all in and put together for these Buttons. Complete assemblies, $40.00 each. PM me here, or check them all out (as well as a lot of other stuff) at https://www.etsy.com/shop/PinballShooters
Popeye isn't up yet, or the second one for Champion Pub CP, I can send you pics if you like, but they will get up there soon.
Thanks, Dave and Brenda
Great,this should keep you busy for a while
Here is a couple of Pics of the Dalek for Doctor Who, oh and Bump! Other Pics are earlier in this thread.
Available here, or PM me.
https://www.etsy.com/shop/PinballShooters
Thanks, Dave
Quoted from PinsideMike:Was this pic your guys work? I cant seem to find its original creator. Even if not, any interest in making one like it for Bride of Pinbot? I am sure I am not the only one especially with 2.0 just around the corner.
il_75x75.547282571_a828.jpg 2 KB
Yup, That's ours, there is a PinBot one too, in the same style. It was a tough one to figure out what to do because of the sides of her head.
https://www.etsy.com/listing/174792273/
I'll find the PinBot pic when I get home and post it.
Thanks, Dave and Brenda
aSH ON 114F BRIDE.jpgI hope you don't think I am derailing the thread too much but yeah I would love to see the Pin-Bot shooter when you can.
Quoted from PinsOnly:Yup, That's ours, there is a PinBot one too, in the same style. It was a tough one to figure out what to do because of the sides of her head.
https://www.etsy.com/listing/174792273/
I'll find the PinBot pic when I get home and post it.
Thanks, Dave and BrendaaSH ON 114F BRIDE.jpg 29 KB
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/custom-launch-buttonsafmmbmm and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Calgary, AB
Lititz, PA