(Topic ID: 17642)
Linked Games
Addams Family, The
Bally, 1992-
Attack from Mars
Bally, 1995
-
Bram Stoker's Dracula
Williams, 1993
-
Indiana Jones: The Pinball Adventure
Williams, 1993
-
No Fear: Dangerous Sports
Williams, 1995
-
Star Trek: The Next Generation
Williams, 1993
-
Terminator 2: Judgment Day
Williams, 1991
-
Twilight Zone
Bally, 1993
Topic Gallery
Auckland
Vancouver, WA
Very cool. If I had a BSD I'd be putting in an order!
If they are held in place by only the button are they able to freely (or slightly) rotate? Or do the side rails stop that from happening? I'm going to assume the latter is correct?
Thanks!
Yes they are held in place by the button and sit hard up against the side rail to stop twisting. I recommend putting a few strip of electrical tape on the back so they don't actually touch the cabinet.
Some more:
IMAG0704.jpg Cab_Protector.jpg TZ.jpg No_Fear_Protector.jpg DSCF1100Small.jpg AFM_Protectors.jpg
Are you limited on the numbers you have? I want a TZ but need to wait a few weeks.
6 months later
Maple Ridge, BC
Quoted from spacies:Hey guys,
I have designed and made these cabinet protectors. They are held in place by the button only. No sticky stuff here!
Many more designs in the works.
$42 shipped anywhere in the world.
Please email coolcatsltd at gmail dot com.
Cheers!
What have you come up with, since the original post? Which titles?
Palm Beach
Lemmer
For anyone who's installed these, do the cut outs for the lettering bother the fingers? I'm assuming the edge are smoothed down so you wouldn't be left with bleeding fingers - but I can imagine the edges could be bothersome while playing.
Love these - very creative. Those are some trademarked items your are selling. Beside Rick at planetary, move studios and publishers.
What is the difference between these and pinmats?
Discussing on a discussion board.
I've tried messaging several times in the past months. Tried 2 different emails and pm'ed on klov and here...nothing.
I'm really sad because I really want sets for my 6 dmds.
1 week later
Quoted from Zdoor:I'd like some if you do one for a LOTR LE
I want a set for my LOTR as well.
Any update on which are available, have a website?
Cool. There's lots of interest here. You could make some good money.
I know I've emailed you but put me down for taf, tz, wh20, lotr, sopranos and gnr.
Looking forward to it.
Txs.
2 months later
Hey guys,
As promised I have been chipping away at the designs and fitting. I now have to following new protectors: AFM, IJ, STTNG, TZ, TSPP and LOTR.
I also have the following: TAF, T2, Getaway and BSD.
I am working on more.
*note* due to the size, cut time and extra 'weeding' AFM are $49. The rest are still $42usd shipped.
New photos:
IMG_20130318_183015_(Small).jpg IMG_20130318_153956_(Small).jpg IMG_20130318_151858_(Small).jpg IMG_20130318_151530_(Small).jpg IMG_20130318_183131_(Small).jpg IMG_20130318_150337_(Small).jpg
AFM. Weird problem here. The button holes on the protectors line up perfectly when they are back to back. The right hand protector fits perfectly but the left hand protector sits about 2-3mm lower than the side rail. It could be two things, the button holes on the cabinet aren't the same both sides or the side rail is too high. However, there is some 'meat' in the protector so you can file the bottom off and move the protector higher. This 'could' be a problem with this cabinet only. Who knows. Please keep this in mind 
Sweet baby Jesus! Another mod I must have. Dig the AFM protector.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
